Acoustic emission method for research and control of friction pairs

One of the new physical methods that provides much information about the processes going on in a friction contact zone in real time is acoustic emission (AE). Basic experimental results of AE in friction are presented and analysed. Using AE signals we can get an indication about the state of the friction processes, about the quality of solid and liquid layers on the contacting surfaces in real time, sometimes about intensity of wear, changing of wear and friction regimes and so on. The influence of sliding velocity, load, roughness and some physical and mechanical properties of the body on the parameters of AE are also given. Some attention to the practical implementation of these techniques for control of capability for work of friction pairs in real conditions are given. Modern methods and devices enable condition monitoring of sliding and rolling bearings.     

啤酒酵母菌种的石蜡保藏技术

啤酒酵母菌种用液体石蜡技术保藏具有设备简单、操作方便,成活率高,变异少,优良种性能保持较长时间的优点,实用价值高。本文从液体石蜡保藏菌种的机理、保藏效果、保藏等具体技术操作及其使用方法都作了较为详细的介绍,相信能为啤酒菌种的保藏带来较大的好处。     

负压法(射流法)回收治理液氨尾气

论述了负压法(射流法)回收治理液氨尾气的环保安全工艺技术、原理；解决了目前一直沿用的正压法无法解决的棘手问题。     

连续生产型炉窑排烟温度合理性探讨

推导了热效率变化百分率和单产标准煤耗变化百分率的计算公式 ,通过计算说明了连续生产型炉窑依靠高效余热回收而实施高烟温生产操作 ,实际上是增加而不是减少燃料消耗 ,据此 ,指出“三高一低”理论的不完全正确和HTAC技术在此类炉窑上的不可用性。论述了连续生产型炉窑低烟温的合理性 ,并提出基于低烟温的“双高低”理论和“烟混型高温低氧燃烧法” ,促使连续生产型炉窑向高效节能环保方向发展     

将紫外光谱用于溴指数测定方法的选择

对未知组成的样品进行紫外光谱扫描 ,根据扫描结果以及各种溴指数测定方法的适用范围 ,选择测定未知物溴指数的适宜方法 ,以提高测定准确度。     

地下水污染试验研究进展

本文在总结国内外众多学者有关污染物在含水层中的运移规律研究成果的基础上，介绍了地下水污染试验研究的最新进展；并据此认为，三维弥散，各向异性含水层介质中污染物的迁移，非饱和土层中的污染物多相迁移和吸力的关系等将成为今后地下水污染传播研究的主要问题。     

氨氮监测中样品蒸馏预处理对结果的影响分析

氨氮监测采用预蒸馏处理后，比色测定结果明显偏低。在样品预蒸馏处理过程中，硼酸作为吸收液，使显色时溶液pH值偏低，导致显色不充分是其主要影响因素。通过采取增加显色剂加入量的方法，解决了显色pH值偏低的问题，得到满意的测定结果。     

The GENIUS-test-facility—first results on background from Rn daughters

GENIUS-TF (Nucl. Instr. and Meth. A 511 (2003) 341; Nucl. Instr. and Meth. A 481 (2002) 149.) is a test-facility for the GENIUS project (GENIUS-Proposal, 20 November 1997; Z. Phys. A 359 (1997) 351; CERN Courier, November 1997, 16; J. Phys. G 24 (1998) 483; Z. Phys. A 359 (1997) 361; in: H.V. Klapdor-Kleingrothaus, H. Pas. (Eds.), First International Conference on Particle Physics Beyond the Standard Model, Castle Ringberg, Germany, 8–14 June 1997, IOP Bristol (1998) 485 and in Int. J. Mod. Phys. A 13 (1998) 3953; in: H.V. Klapdor-Kleingrothaus, I.V. Krivosheina (Eds.), Proceedings of the Second International Conference on Particle Physics Beyond the Standard Model BEYOND’ 99, Castle Ringberg, Germany 6–12 June 1999, IOP Bristol (2000) 915), a proposed large scale underground observatory for rare events which is based on operation of naked germanium detectors in liquid nitrogen for an extreme background reduction. Operation of naked Ge crystals in liquid nitrogen has been applied routinely already for more than 20 years by the CANBERRA Company for technical functions tests (CANBERRA Company, private communication, 5 March 2004.), but it never had found entrance into basic research. Only in 1997 first tests of application of this method for nuclear spectroscopy have been performed, successfully, in Heidelberg (Klapdor-Kleingrothaus et al., 1997, 1998; J. Hellmig and H.V. Klapdor-Kleingrothaus, 1997).

On May 5, 2003 the first four naked high-purity germanium detectors (total mass 10.52 kg) were installed in liquid nitrogen in the GENIUS Test Facility at the Gran Sasso underground laboratory. Since then the experiment has been running continuously, testing for the first time the novel technique in an underground laboratory and for a long-lasting period.

In this work, we present the first analysis of the GENIUS-TF background after the completion of the external shielding, which took place in December 2003. We focus especially on the background coming from ²²²Rn daughters. This is found to be at present by a factor of 200 higher than expected from simulation. It is still compatible with the scientific goal of GENIUS-TF, namely to search for cold dark matter by the modulation signal, but on the present level would cause serious problems for a full GENIUS—like experiment using liquid nitrogen.     

Generation of interfacial instabilities in charged electrified viscous liquid films

This study is concerned with the stability of a two-dimensional incompressible conducting liquid film surrounded by a passive conducting medium, when an electric field is applied in a direction parallel to the initially flat bounding fluid interfaces. Currents generate charges at the bounding interfaces which in turn affect the stress balances there. In the absence of an electric field, the viscous liquid film is stable (instability can be induced by the inclusion of van der Waals forces for ultra thin films). A complete model is presented, at arbitrary Reynolds number, which accounts for conductivity and permittivity contrasts between the fluid and surrounding medium, as well as surface tension. The linear stability of the system is considered for arbitrary Reynolds numbers and it is shown that the stable film can become unstable if, (i) σ _R ɛ _p >1, or (ii) σ _R ɛ _p <1 and (σ _R −1)(1−ɛ _p )<0, where σ _R is the ratio of outer to inner conductivity and ε _p is the ratio of inner to outer permittivity. Instability is possible only if the electric field is non-zero and the scalings near bifurcation points that can be used to construct nonlinear theories are calculated. Several asymptotic limits are also considered including zero Reynolds numbers and short or long waves. The instability criteria given above are constructed explicitly in the case of Stokes flow.     

Study of liquid injection impact on the performance of new refrigerant mixtures

In this paper, the test results of liquid injection impact on the performance of new alternative refrigerant mixtures such as: R-410A, R-507, R-407C and R-404A are discussed, analysed and presented. The test results were obtained using an air-source heat pump set-up with enhanced surface tubing under various liquid injection ratios. Performance tests were conducted according to the ARI/ASHRAE standards. The performance data demonstrated that as liquid injection ratio increases, compressor head pressure and discharge temperature decrease. This has a positive effect in protecting the compressor. The effect of liquid injection on mixture behaviour varies from one mixture to another depending upon the mixture's composition. Furthermore, liquid injection appears to have a significant influence on R-410A behaviour compared to the other mixtures in question. Copyright © 2002 John Wiley & Sons, Ltd.