A3菌产絮凝剂培养动力学及靛蓝废水脱色研究

从土壤中筛选出1株产微生物絮凝剂的菌株A3,利用均匀设计安排试验,用曲线拟合创建数学模型的方法研究了其产絮凝剂的培养基条件和利用A3菌产絮凝剂对靛蓝废水进行脱色处理,获得A3菌最佳絮凝剂生产条件和最佳靛蓝废水脱色工艺.结果表明,A3菌产絮凝剂的最佳培养条件为葡萄糖添加量2.2%、酵母膏添加量0.51%、pH 7.6、温...     

绒线漂染综合控制系统研究应用

介绍了一种集中管理,分散控制的计算机温度自动控制系统,该系统控制精度高,控制方法先进,测量手段简单实用,抗下扰能力强,性能价格比好。在天水宏大绒线厂的试运行中取得了良好的绒线染色效果,并取得了显著的经济效益。     

体验消费与染织艺术的传承与发展

目的在现代商业环境及文化创意产业发展背景下,为传统染织艺术文化的传承和发展探寻可行之路。方法通过体验消费的方法和模式研究,分析消费者在体验消费过程的行为和心理活动,并结合传统手工染织艺术的产品和生产过程的特点,探讨现代体验消费的商业模式对染织艺术传承和发展的作用与影响。结论传统染织艺术文化可以通过艺术沙龙的形式,在高雅的商业艺术环境中展现手工染织的艺术魅力,从而让传统染织手工艺重新找到生存的土壤,使染织艺术得以传承和发展。     

两性田菁胶在处理高浓度印染废水中的应用

研究了以聚合硫酸铁(PFS)为主凝剂、两性田菁胶(ASG)为助凝剂处理高浓度印染废水的各种影响因素。实验结果表明：PFS和ASG分别以2000mg／L和100mg／L的复配浓度、pH值接近中性时混凝效果为最佳，CODCr去除率达到80％，色度与浊度去除率均达99％以上。     

基于K-均值聚类的神经切片图像功能束类型识别研究

针对周围神经物理切片图像中不同类型的神经功能束染色后显示出的特异性,提出了一种基于K-均值聚类的神经切片染色图像中神经功能束类型识别的方法。首先通过特征分析与提取决定以灰度均值肛和方差σ2作为纹理特征,然后运用本文算法对神经切片染色图像中的不同类型神经功能束进行聚类和识别。通过在人体周围神经组织切片图像上的实验证明,该算法能对神经切片染色图像中的神经功能柬类型进行有效分类识别。     

浅谈丁基胶垫与气门嘴的粘合

本文介绍了丁基橡胶垫与铜制气门嘴粘合的有关问题，并提供了解决方法。     

Stochastic Models for Pad Structure and Pad Conditioning Used in Chemical-Mechanical Polishing

Stochastic models are presented for the structure and conditioning of pads used in chemical-mechanical polishing of wafers. First the one-dimensional distribution function of surface depth in the case of a conditioned solid pad is described. Then, for characterizing the structure of a foamed pad, the theory of random closed sets is applied. An important distributional characteristic of a random closed set, the linear contact distribution function, yields the contribution to surface depth resulting from pores. As a special example the Boolean model is considered. This leads to a formula that describes the variability of the surface of a conditioned foamed pad after a certain time. Simulations and experimental data show a good agreement between theory and reality.     

硅微条探测器

硅微条探测器的位置分辨率可好于σ＝1．4μm，这是任何气体探测器和闪烁探测器很难作到的。主要介绍硅微条探测器的特点、结构、工作原理及其在近年来的发展和在高能物理、核医学等领域应用概况。     

Effects of Load Direction on Performance of Tiliting Pad Journal Bearings

At the previous works for tilting journal pad bearings （TPJBs）, most TPJBs are designed to operate with the load either directly on-pad（LOP） or directly between-pad（LBP）. However, in practice, in some cases, the load direction can change dramatically in operation. With the current requirements for the analysis of dynamic characteristics of the rotor-bearing systems, the effects of the load direction on the bearing performance must be known. So, in this paper, the effects of load direction on the static and dynamic characteristics of TPJBs are obtained with theoretical analysis based on the hydrodynamic lubrication theory, and the influence of load direction on the performance of TPJBs in different structure and operating parameters is also analysed. The results show that the load direction has considerable effects on the static and dynamic characteristics of the TPJBs, especially for the TPJBs that are operating under heavy load and high rotor speed. And for the operating condition that load direction changed rapidly, TPJBs with more pads, smaller length to diameter ratio, larger clearance ratio and smaller perload ratio can reduce the performance fluctuation with the variation of load direction.     

混杂纤维盘式制动闸片材料的装车实验研究

采用混杂纤维作增强材料生产列车客车车辆闸片,依据TB/T3118-2005进行了"现车运用试验".实际测量了闸片的磨耗和表面状况,在线测量了制动盘厚度变化并对制动盘表面进行了观测.实验结果表明,闸片线磨损率低,表面平整无龟裂、塌边和掉渣等,制动盘面光洁,无集中产生热斑和微裂纹等异常状况.摩擦学机理分析指出,混杂纤维闸片...