太赫兹带阻滤波器工艺研究

以中心工作频率130 GHz、衰减深度为-40 dB的太赫兹带阻滤波器为制备对象,介绍了其在制备过程中蒸镀、光刻、显影及湿法刻蚀等工艺步骤中的一些技术细节。制备得到的太赫兹滤波器加工误差<±3 μm,考察了加工误差对滤波器传输性能的影响,该加工误差在可接受范围。为进一步验证工艺的可靠性,使用空间测量装置获得了滤波器样品传输性能,测试结果与设计值吻合度较好。最后,探讨了本工艺推广至更高频率器件的适用性及需要改进之处。文中介绍的硅基太赫兹器件加工工艺适用于电子器件与光子器件的融合发展。     

热稳定金刚石聚晶的制备及表征

在高温高压条件下（5.6GPa,1200℃～1480℃）,以含硼金刚石微粉为原料,镍基合金为烧结助剂,采用熔渗法成功制备了热稳定金刚石聚晶（Thermally stable PCD）。通过X射线衍射（XRD）和扫描电镜（SEM）,研究了烧结温度对热稳定金刚石聚晶的物相成分、微观组织形貌的影响;并与普通金刚石聚晶进行了差热（DTA）、热重（TG）的对比分析测试,结合X射线光电子能谱（XPS）测试结果给出了相应解释。实验结果表明：在压强为5.6GPa条件下,温度在1300℃～1450℃区间内,才能实现热稳定PCD的烧结;此时形成的热稳定PCD的耐热性和抗氧化性相比普通PCD均有较大幅度提高。     

AFM 在纳米结构加工中的应用研究

文中阐述了基于自行研制的原子力显微镜(AFM)的纳米刻蚀加工方法，研究了针尖上的载荷大小和扫描次数对加工深度的影响，利用AFM的微探针在氧化铝(Al2O3)材料表面加工出纳米结构，验证了该加工方法的可行性。实验结果表明基于AFM的纳米刻蚀技术可作为加工纳米器件的重要手段。     

Ultrafast fabrication of nanostructure WO3 photoanodes by hybrid microwave annealing with enhanced photoelectrochemical and photoelectrocatalytic activities

Tungsten oxide (WO₃) nanoplate films with a relatively rough surface were successfully fabricated via a simple hydrothermal method, followed by the hybrid microwave annealing (HMA) treatment only a few minutes for the first time. The microscopic morphology and phase were characterized by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HR-TEM), Raman spectrum and X-ray diffraction (XRD). Photoelectrochemical measurements demonstrated that the obtained WO₃ film of microwave processing for 11 min exhibited the photocurrent density of 1.60 mA/cm² at 1.2 V (vs. Ag/AgCl) and the IPCE value of 55% at 355 nm under an applied voltage of 1.0 V (vs. Ag/AgCl), which were about 3 and 2.5 times compared with the WO₃ film prepared by the conventional annealing method, respectively. Moreover, the WO₃-HMA films were applied to the versatile photoanode-driven photoelectrochemical system for CO₂ reduction into formic acid. The maximum formic acid generation rate and faradaic efficiency of the WO₃-HMA films were 9.21 μmol h^?1 cm^?2 and 45.45%, respectively. This study provided a facial and rapid method to synthesize the high-performance WO₃ photoanodes with better photoelectrochemical and photoelectrocatalytic activities.     

计量圆光栅的制作工艺及质量参数研究

计量圆光栅是光电编码器中的核心元件,它的精度直接影响光电编码器的精度,因此,制作出高精度的计量圆光栅是研制高精度光电编码器的前提。详细介绍了计量圆光栅的制作工艺和衡量计量圆光栅质量的参数,并通过实验对计量圆光栅的制作工艺和质量参数进行了对比,为设计高精度角度传感器提供了一定的理论参考。     

Material extrusion additive manufacturing of advanced ceramics: Towards the production of large components

Thermoplastic extrusion based additive manufacturing (MEX-AM), is a very interesting fabrication method for the shaping of larger ceramic parts. Commercial filaments are currently available in the market, but due to the lack of information from the suppliers, it is not easy to select the suitable filament material for the 3D printing of individual ceramic objects. In this study, three commercial yttria-stabilized zirconia (YSZ) filaments provided by Fabru GmbH, SiCeram GmbH and PT+A GmbH were investigated. According to our results, it is possible to print YSZ filaments with extremely different flexibility and rheological properties. Compared to the other two filaments, the Fabru filament resulted in significantly higher flexibility, but the extrusion pressure to print it through a 0.25 mm nozzle was significantly higher at 150 °C. Interestingly, in the SiCeram filament, a grain orientation effect could be observed. Based on STA analysis it can be assumed that for the Fabru filament, the polymer which decomposes at a high temperature can already be removed by solvent debinding (SD). Finally, 70 mm tall cup structure including overhang features and different wall thicknesses was used to evaluate the printing and post-processing of YSZ filaments.     

三元层状结构MAX相陶瓷材料的制备技术及其研究发展现状和发展趋势

三元层状结构陶瓷材料主要是指M_n+1AX_n相,三元层状结构MAX相陶瓷材料具有金属的特性还具有陶瓷的特性,三元层状结构MAX相陶瓷材料具有较高的力学性能,良好的耐磨损性能和良好的耐腐蚀性能,并具有良好的抗高温氧化性能等,还具有良好的可加工性能。三元层状结构MAX相陶瓷材料主要有Ti₃SiC₂,Ti₄SiC₃,Ti₃AlC₂,Ti₂AlC,Ti₄AlN₃和Ti₂AlN等。本文主要叙述三元层状结构MAX相陶瓷材料的制备技术,物相组成,显微结构,力学性能和耐磨损性能,耐腐蚀性能和抗高温氧化性能以及其他性能等。并叙述三元层状结构MAX相陶瓷材料的研究发展现状和发展趋势。并对三元层状结构MAX相陶瓷材料的未来研究发展趋势和发展方向进行分析和预测。     

Enhanced mechanical performance of fused filament fabrication copolyester by continuous carbon fiber in-situ reinforcement

As one of the most commonly used thermoplastics, polyester has rarely been used as the raw materials of 3D printing. However, copolyester obtained by copolymerization modifying polyester, such as Poly Ethylene Terephthalate Glycol (PETG), has been proven to be suitable for the fused filament fabrication (FFF) technique in previous studies, but the mechanical performance of printed products is still poor. In this paper, 3D printed PETG is in-situ reinforced by continuous carbon fiber (CCF), and the relationship between the process parameters and the mechanical performance of CCF/PETG is systematically investigated. The results show that the performance of 3D printed PETG is significantly enhanced by CCF in-situ reinforcement due to the effectively impregnation of CCF. By optimizing process parameters, the tensile strength, flexural strength and flexural modulus of CCF/PETG are 597%, 293% and 650% of pure PETG, respectively, with a relatively low fiber mass fraction of 19.2 wt%. This paper demonstrates that CCF in-situ reinforced 3D printed copolyester may be used in the manufacture of complex structural parts that require high mechanical performance in the engineering application.     

Biological,Chemical, and Electronic Applications of Nanofibers

With their high‐surface‐to‐volume ratio, nanofibers have been postulated to increase interactions between nanofibrous materials and targeted substrates, which are helpful to overcome many obstacles and enhance the efficiency in a diverse number of applications. Over the past decade, many studies have been published on the fabrication of nanofibers and their applications in various fields. In this review, novel biological, chemical, and electrical characteristics of nanofibers as well as their recent status and achievements in medicine, chemistry, and electronics are analyzed. It is found that nanofibers can induce fast regeneration of many tissues/organs in medical applications and improve the efficiency of many chemical and electronics applications.

     

磷化镍的制备、表征及其催化性能研究进展

原油的劣质化和环保法规的日益严格使馏分油的加氢精制技术面临严峻挑战,近年来,磷化镍（Ni2P）由于具有优异的加氢脱硫和加氢脱氮性能已成为新型催化加氢材料研究的焦点。本文综述了Ni2P的制备、表征和催化性能方面的研究进展。磷化氢还原法、次磷酸盐还原法和氢气等离子体还原法可在较低温度下制备高活性Ni2P催化剂。扫描透射电镜表明Ni2P（0001）表面有Ni3P和Ni3P2两种可能的终端结构。Ni3P终端的Ni是四方锥型结构,有解离H吸附;而Ni3P2终端的Ni是四面体型结构,无解离H吸附,这表明四方锥型的Ni活性点具有高反应活性。从目前的研究看,Ni2P是具有潜在应用前景的一种新型加氢精制催化材料。