国外聚甲醛生产技术现状与发展

综述了国外主要甲醛生产厂商的工艺技术，树脂生产技术的发展和品种开发情况。     

弱酸性条件起始合成MUF树脂工艺研究

为了开发一种新的在"弱酸—弱碱—弱酸—弱碱"条件下合成三聚氰胺-尿素-甲醛树脂(MUF)的工艺,对弱酸性条件下起始合成MUF工艺进行研究.探讨了在不同酸性阶段加入的三聚氰胺对脲醛树脂性能的影响,找出最佳的三聚氰胺改性脲醛树脂的合成工艺.在最佳工艺基础上,评价三聚氰胺用量对MUF树脂性能的影响以及对胶合板性能的影响,并对MUF树脂和普通脲醛树脂进行红外分析.结果证明:三聚氰胺在甲醛与尿素一次缩聚之后加入,对脲醛树脂改性效果最好,其胶合板湿剪切强度与甲醛释放量之间达到较好平衡,胶合板甲醛释放量为0.63mg/L,湿剪切强度为1.03MPa.红外谱图分析表明:三聚氰胺分子以亚甲基与脲醛树脂分子链相连并有可能嵌入脲醛树脂分子链中,形成一定数量的醚键,使三聚氰胺在脲醛树脂中真正起到骨架作用.     

树脂增强选择性激光烧结多孔金属件的研究

针对选择性激光烧结(SLS)间接方法成型的金属零件形坯,经脱脂和高温烧结后形成的零件存在大量孔隙和空洞,其致密度和强度都较低,不能满足实际应用要求的问题,采用改性耐高温环氧树脂浸渗零件烧结坯的方法,使多孔金属件致密化,并粘结内部金属网架,提高零件的机械性能.对浸渗烧结坯的拉伸强度的测试和扫描电镜(SEM)以及热失重(TGA)的分析结果表明,浸渗树脂后的烧结坯拉伸强度提高了约4倍;改性环氧树脂和金属网架粘结在一起,形成一个密实的网络结构,致密度大幅提高;零件可在200℃的温度下使用.该方法可以制造注塑模具和功能零件.     

Milled fibre reinforced epoxy resin — an engineering polymer composite

A milled fibre reinforced epoxy resin composite (MFRE) has been developed for low temperature use. It is resistant to fracture at temperatures down to at least 77 K in direct contact with liquefied gases. It can be used as an adhesive, a gap-filling mastic or a moulding compound for difficult cryogenic applications. The characteristics of the material and some applications are described.     

高吸油性树脂

高吸油性树脂是与一般吸油材料不同的自溶胀型新型吸油材料,它能够吸收从矿物油到天然油脂等各种油。目前国外正在用途、市场两方面进行系统开发。本文仅就其机理、特征、用途作简单介绍。     

阳离子交换树脂催化合成十三碳二元酸二乙酯

以强酸性阳离子交换树脂为催化剂,十三碳二元酸与乙醇为原料合成十三碳二元酸二乙酯,考察了影响反应的因素。结果表明:醇酸摩尔比为4∶1,催化剂用量为酸质量的2%,在3分子筛脱水的情况下反应7 h,酯化率达98.4%,并且催化剂可重复使用3次。     

大型尿素造粒塔新型的腐蚀防护

详细阐述了尿素造粒塔的腐蚀机理，就其中的内外侧的防腐蚀形态进行了总结，并就此针对性的进行了防腐蚀材料的推荐及设计，尤其是玻璃鳞片胶泥。     

一种新型气硬冷芯盒树脂砂工艺试验及其在生产中的应用

原砂加入2．5％水溶性酚醛树脂，固化剂为甲酸甲脂，加入量占树脂的30％～40％。先把甲酸甲脂在气体发生器中气化，然后再与40％的压缩空气混合，吹气硬化制芯，最高抗拉强度1．2MPa，抗压强度0．32MPa，发气量12mL／g。生产浇注试验表明：砂芯表面光洁，轮廓清晰，尺寸精确，铸件缺陷少，无毒或低毒，和一般冷硬树脂砂比较，成本降低30％。     

全固态裸露式Ag／AgCl参比电极的研制及应用

该文报道了一种树脂接界全固态裸露式Ag／Agcl参比电极,勿需电镀氯化,制备工艺简单,性能稳定,是对电解型Ag／AgCl参比电极的一大改进。可代替饱和甘汞电极作为通用型参比电极,同时可减少汞对环境所造成的二次污染,在温度大于75℃时仍能保持良好性能,突破了甘汞电极的局限。     

Application of functionalised carbon nanotubes immobilised into chitosan films in amperometric enzyme biosensors

A new approach for building a bio-conductive interface for enzyme immobilisation is described. This strategy permits very simple preparation of the enzyme biosensor and also reveals direct electron transfer features. A graphite-epoxy resin composite (GrEC) electrode modified with functionalised multi-wall carbon nanotubes (MWCNTs) immobilised by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide together with N-hydroxysuccinimide (EDC–NHS) in a chitosan (Chit) matrix was prepared and characterised by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in the presence of hexaammineruthenium (III) chloride. It was then used as a base for glucose oxidase (GOx) immobilisation by the simple method of crosslinking with glutaraldehyde (GA) with bovine serum albumin (BSA) as carrier protein. The resulting mediator-free biosensor was applied to the determination of glucose in amperometric mode at different applied potentials and the mechanism of reaction was also investigated by cyclic voltammetry, with and without dissolved oxygen in solution. Analytical parameters, as well as reproducibility, repeatability and stability were determined. Interferences were assessed using different compounds usually present in natural samples, such as wines, juices or blood, in order to evaluate the selectivity of the developed biosensor. The novel combination of carbon nanotubes immobilised with chitosan crosslinked with EDC–NHS and glucose oxidase immobilised by crosslinking with glutaraldehyde offers an excellent, easy to make biosensor for glucose determination without interferences.