Regulation of Ionic Distribution and Desolvation Activation Energy Enabled by In Situ Zinc Phosphate Protective Layer toward Highly Reversible Zinc Metal Anodes

Despite the merits of high specific capacity, low cost, and high safety, the practical application of aqueous Zn metal batteries (AZMBs) is plagued by the dendritic growth and corrosion reaction of Zn metal anodes. To solve these issues, a Zn₃(PO₄)₂·4H₂O protective layer is in-situ constructed on Zn foil (Zn@ZnPO) by a simple hydrothermal method, avoiding the traditional slurry-casting process. The insulating and conformable ZnPO layer improves the wettability of Zn@ZnPO and aqueous electrolyte via decreasing the contact angle to 11.7^o. Compared with bare Zn, the Zn@ZnPO possesses a lower desolvation activation energy of 35.25 kJ mol^-1, indicating that the ZnPO fasters the desolvation of hydrated Zn²⁺ ions and thereby ameliorates their transport dynamics. Micro-morphology and structural characterization show that there are no dendrites forming on the post-cycling Zn@ZnPO anodes, and the interfacial ZnPO layer remains almost identical before and after cycles. It can be explained that the electrochemically stable ZnPO layer acts as an ionic modulator to enable the homogeneous distribution of Zn²⁺ ions, inhibiting the growth of Zn dendrites. Benefiting from these advantages, the Zn@ZnPO based symmetric and full cells deliver highly reversible Zn plating/stripping behavior and long cycling lifespans.     

Magnesium Gradient-Based Hierarchical Scaffold for Dual-Lineage Regeneration of Osteochondral Defect

Osteochondral regeneration remains a great challenge due to the limited self-healing ability and the complexity of its hierarchical structure and composition. Mg²⁺ and hypoxia are two effective modulators in boosting chondrogenesis. To this end, a double-layered scaffold (D) consisting of a hydrogel layer on a porous cryogel is fabricated to mimic the hierarchical structure of osteochondral tissue. An Mg²⁺ gradient is incorporated into the double-layered scaffold with hypoxia-mimicking deferoxamine (DFO) embedded in the hydrogel (D-Mg-DFO), which remarkably augments the dual-lineage regeneration of both cartilage and subchondral bone. The higher Mg²⁺ supplementation from the upper hydrogel, associated with its hypoxia-mimicking situation and small pore size, exhibits promotive effects on chondrogenic differentiation. The lower Mg²⁺ supplementation from the bottom cryogel, associated with its interconnected macroporous structure, achieves multiple contributions in stem cell migration from bone marrow cavity, matrix mineralization, and osteogenesis. Furthermore, rabbits’ trochlea osteochondral defects are established to evaluate the regenerative outcome. Compared to control scaffolds containing only Mg²⁺ or DFO, the D-Mg-DFO scaffold presents the best regenerative effect under the synergistic contribution of multiple factors. Overall, this work provides a new design of scaffold toward an effective repair of cartilage defect.     

高低温磷改性β分子筛制备及其烷基化反应性能研究

对常温和高温条件下的磷改性β分子筛进行热重、核磁共振和酸性分析,并考察其在苯与乙烯烷基化反应中的反应性能。结果表明：β分子筛高温条件下引入铵根离子后,其DTG曲线在220～230 ℃之间有一明显的失重峰出现,即铵根离子进入分子筛内部;其 31P MAS NMR和27Al MAS NMR表征中在化学位移为-30.908和41.392处均有一强吸收峰,即β分子筛的骨架结构中有P（4Al）和Al（4P）四配位结构出现;其NH3-TPD酸性增强,酸量增加。评价结果表明β分子筛高温条件下引入铵根离子后,其烷基化反应性能明显提高。     

磷改性对Pt/HZSM-5催化剂的酸性调变及临氢异构化性能的影响

采用等体积浸渍法制备了不同P含量改性的Pt-P/HZSM-5异构化催化剂,通过低温N2吸附-脱附、XRD、NH3-TPD和Py-IR等手段对催化剂试样进行了表征,在连续固定床反应装置上考察了催化剂的临氢异构化反应性能。结果表明：加入少量的P能够显著地调变催化剂的酸量和酸强度分布,使弱酸量增加,强酸量减少,Br?nsted酸量提高;Pt-P/HZSM-5催化剂显著抑制了裂解反应的发生,提高了反应的异构化率和DMB（二甲基丁烷）选择性。在反应压力1.5 MPa、氢油体积比500、体积空速1 h-1和反应温度280 ℃的条件下,P质量分数1%、Pt质量分数0.4%的Pt-P/HZSM-5催化剂的性能最优,正己烷转化率达到75.78%,异构化率为75.36%,裂解率为3.69%,DMB（二甲基丁烷）选择性为6.65%。     

钢铁表面锌系磷化膜的研究

本文采用ＳＥＭ和ＴＥＭ等测试手段，研究了四功能处理液不同条件下在钢铁表面上形成锌系磷化膜的形貌，晶体结构；采用ＥＤＳ研究了磷化膜的化学成发，通过实验确定了Ｚｎ／Ｐ值在２．１２～３．２０时，磷化膜具有良好的耐蚀性。     

磷酸酯类离子液体在燃油深度脱硫中的应用

研究了3种磷酸酯类离子液体,即1,3-二甲基咪唑磷酸二甲酯盐([MM im]DM P)、1-乙基-3-甲基咪唑磷酸二乙酯盐([EM im]DEP)和1-丁基-3-甲基咪唑磷酸二丁酯盐([BM im]DBP)的制备过程,考察了这3种磷酸酯类离子液体对模型油中3-甲基噻吩、苯并噻吩和二苯并噻吩的脱除效果及磷酸酯类离子液体的电化学再生方法。实验结果表明,这3种磷酸酯类离子液体的脱硫能力强弱顺序为:[EM im]DEP>[BM im]DBP[MM im]DM P;且对二苯并噻吩的脱除效果最好,对苯并噻吩的脱除效果次之,对3-甲基噻吩的脱除效果较差。以[EM im]DEP为萃取剂,油剂质量比为1∶1时,经5次萃取后,二苯并噻吩的脱除率可达到99.5%。利用电解法对[EM im]DEP进行了再生,在5~10V电压下电解10h,[EM im]DEP的脱硫率可以达到新鲜[EM im]DEP的90%以上。     

Cu-Mg/Al_2O_3催化乙醇和乙二胺合成N-乙基乙二胺

在固定床反应器内,乙醇和乙二胺经分子间催化胺化反应合成了N-乙基乙二胺(NEED),考察了一系列铜系催化剂的活性,并筛选出催化性能较好的Cu-Mg/A l2O3催化剂;通过X射线衍射和透射扫描电子显微镜方法表征了助剂Mg对Cu/A l2O3催化剂的改性作用;考察了助催化剂Mg含量、反应温度、反应压力、进料量和乙二胺含量等对Cu-Mg/A l2O3催化剂性能的影响。实验结果表明,Cu-Mg/A l2O3催化剂具有很好的活性和选择性;在200℃、3.0MPa、质量分数20%的乙二胺乙醇溶液、进料量1.0mL/m in的条件下,乙二胺的转化率为71.56%,产物NEED的选择性和收率分别为92.62%和69.86%;经过20 d的连续使用表明,Cu-Mg/A l2O3催化剂具有良好的稳定性。     

对海水进行混凝除浊预处理研究

介绍采用聚合氯化铁（PFC）为絮凝剂，对海水进行混凝除浊预处理方法。考察了原海水pH、搅拌速度、反应时间及PFC用量对海水预处理效果的影响。结果表明，在原海水pH凋至9．0，搅拌速度控制在200min^-1，反应时间选择8—10min，PFC用量0．10μg／g的最佳条件下，能使处理后的海水浊度降至0．05mol／L，而联产的酸性废水中和剂浆料中Mg（OH）2含量在25％～45％，大肠菌群的去除率大于89．3％。     

添加剂对工业齿轮油性能影响的研究

研究了硫化烯烃、磷酸酯胺盐、硫磷酸酯极压抗磨剂,含氮杂环衍生物多功能添加剂和防锈剂等,对工业齿轮油抗乳化性能、极压抗磨性能、防锈性能的影响;以及硫化烯烃、磷酸酯盐极压抗磨剂与含氮杂环衍生物多功能添加剂之间的协和效应。试验结果表明:1.2%~1.6%复合添加剂调制的CKD220工业齿轮油中,磷酸脂盐的正确选用可以提高齿轮油的抗乳化性能、防锈性能和减少防锈剂用量。硫化烯烃与磷酸脂盐、含氮杂环衍生物多功能添加剂的合理组合,可以提高齿轮油的极压抗磨性能和防锈性能,减少添加剂总加剂量。     

蒸汽团粒法复混肥工艺及装置的优化改造

文中介绍了采用蒸汽团粒法、尿素喷浆造粒技术生产复混肥料的工艺特点,分析了设备的改造、工艺条件的完善过程中存在问题及解决措施,收到了良好的效果.