铁矿石冶金性能实验方法的改进

在不影响实验结果的前提下，对铁矿石的还原度实验方法进行改进。改进后每个实验时间缩短3～4．5h，且大大降低了实验成本。     

Corrosion of metals and alloys in mixed gas environments at elevated temperatures

The attack of nickel, cobalt, iron, and alloys of these metals containing chromium and aluminum, by gases containing sulfur-oxygen, carbon-oxygen, and nitrogen-oxygen has been studied at temperatures of 600 and 900°C. The degradation of these metals and alloys was characterized by using standard analytical techniques with emphasis on optical metallography. Three types of accelerated degradation were identified for the attack of alloys by gases containing another oxidant in addition to oxygen. One type of degradation occurred because of the formation of reaction products composed of mixtures of phases involving both of the oxidants. Another type resulted from the reaction of second oxidant phases with oxygen. The third form of degradation involved the development of less protective phases due to thermodynamic instabilities. Thermodynamic stability diagrams are used to help account for the effects produced by different elements in the alloys.     

负载型光催化剂降解有机废水的研究进展

光催化技术应用于有机废水处理具有广阔的前景，负载型光催化剂以其独特的优点日益受到人们的关注，因此，在简述普通未负载光催化剂降解有机废水的基础上，重点讨论负载型TiO2光催化剂的制备及应用。     

Investigations of surface degradation of high‐density polyethylene materials resulting from tracking,using physicochemical analysis

In the present work tracking phenomena were studied with high‐density polyethylene (HDPE) materials under dc voltage, with NH₄Cl and acid rain as contaminants. It was determined that the tracking time of the material depends on the conductivity and flow rate of the contaminant. Furthermore, physicochemical analysis by wide‐angle X‐ray diffraction studies, differential scanning calorimetry, and luminescence spectroscopy was carried out, whereupon it was concluded that the tracking process is a surface‐degradation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2843–2849, 2002; DOI 10.1002/app.10260     

NIT-Ph-p-BEN氮氧自由基的制备及催化降解性

以对醛基苯甲酸为原料，通过醛酸与2,3-二甲基-2,3-二羟胺基丁烷缩合，再经NaIO4氧化最终制得4-(4,4,5,5-四甲基-1,3-二氧化物)咪唑基-1-苯甲酸（NIT-Ph-p-BEN氮氧自由基）。采用FTIR、UV、ERP（电子顺磁共振波谱仪）和元素分析等对其结构进行表征；通过催化降解废水中有机染料甲基橙、甲基蓝和罗丹明B对其催化活性进行了评估。结果表明，当甲基橙、甲基蓝和罗丹明B浓度为15 mg/L，NIT-Ph-p-BEN质量浓度为0.15 g/L，H2O2浓度为30 mmol/L时，NIT-Ph-p-BEN对甲基橙有更好的催化降解性，仅在1 h内甲基橙的降解率达到94.26%。此外，反应机理表明，H2O2有助于实现NIT-Ph-p-BEN自由基的再生和循环利用。     

聚碳酸酯的热降解

综述了聚碳酸酯的热稳定性及其影响因素,并详细论述了一些添加剂如偶联剂甲基三甲氧基硅烷、钛酸四丁酯、阻燃剂二苯砜磺酸钾(KSS)、聚氨丙基苯基倍半硅氧烷(PAPSQ)等对聚碳酸酯热稳定性的影响,阐述了Kissinger法和Ozawa法等聚合物热降解动力学的分析方法。重点介绍了近期国内外有关聚碳酸酯热降解产物和热降解机理方面的研究成果。     

Different effects of tri(acryloyloxyethyl) phosphate on the thermal degradation of photopolymerized epoxy acrylate and polyurethane acrylate films

Tri(acryloyloxyethyl) phosphate (TAEP) was blended in different ratios with epoxy acrylate EB600 and polyurethane acrylate EB270 to obtain a series of UV curable flame retardant resins. The thermal degradation mechanisms of their cured films in air were studied by thermogravimetric analysis, in situ Fourier‐transform infrared spectroscopy, and direct pyrolysis/mass spectrometry measurements. The results showed that the phosphate group in TAEP first degraded to form poly(phosphoric acid) before the degradation of EB600. Then, the formed poly(phosphoric acid) effectively promoted the conversion of EB600 to form char, which prevented the sample from further burning. However, urethane group in EB270 degraded simultaneously with phosphate group in TAEP, leading to not effectively increase the conversion of EB270 to char during the thermal degradation. It was thus found that the addition of TAEP more effectively improved the thermal stability, flame retardance, and the char yield during combustion of EB600 than those of EB270. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3130–3137, 2006     

光催化降解甲醛的波长效应研究

分别以紫外杀菌灯和黑光灯为光源，研究了TiO2薄膜催化剂上甲醛的光催化氧化反应．实验结果表明，紫外杀菌灯照射下，甲醛的光催化降解率明显低于以黑光灯为光源时甲醛的光催化降解率．采用傅立叶红外光谱(FT-IR)和热分析(TG-DTA)对反应后的TiO2光催化剂进行分析和表征，对两种不同光源照射下甲醛光催化降解率的差异进行了初步探讨．     

Thermal degradation behaviors of polypropylene with novel silicon‐containing intumescent flame retardant

The N‐[3‐(dimethoxy‐methyl‐silanyl)‐propyl]‐N′‐ (9‐methyl‐3,9‐dioxo‐2,4,8,10‐tetraoxa‐3,9‐diphospha‐spiro[5.5]undec‐3‐yl)‐ethane‐1,2‐diamine/dimethoxy dimethyl silane copolymer (PSiN II), which simultaneously contains silicon, phosphorus, and nitrogen, is synthesized and incorporated into polypropylene (PP). The flame retardancy is evaluated by the limiting oxygen index value, which is enhanced to 29.5 from 17.4 with 20% total loading of PSiN II. The thermal degradation behavior of PP/PSiN II is investigated by thermogravimetric analysis under N₂ and air. The PP/PSiN II sample degrades at 400°C for different amounts of time, and the process of degradation is studied by Fourier transform IR. The morphology of the char formed at 400°C for 10 min is investigated by scanning electron microscopy. The swollen inner structure, close, and smooth outer surface provide a much better barrier for the transfer of heat and mass during fire and good flame retardancy. The thermal stability of PP is improved by incorporation of PSiN II. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2487–2492, 2005     

壳聚糖微细粉末化研究

本文研究了壳聚糖在乙酸水溶液中滴加H2O2的氧化降解条件与相对分子量的关系及结晶的影响因素，结果表明适当降低相对分子质量和添加成核剂，并在低温下干燥，才能得到高度结晶的微细粉状微晶壳聚糖。