活性炭对含铬废水的吸附处理研究

研究了活性炭吸附处理实验室模拟含铬废水。实验结果表明,当活性炭用量为1 g,废水pH=4~5,吸附接触时间大于1 h,活性炭与铬含量比值大于5 mg Cr6+/g活性炭时,处理效果可达99%以上;吸附符合Freund lich等温模式,吸附等温方程式为logq=0.7780+0.9716 logc,以物理吸附为主;吸附穿透体积为25 mL,活性炭吸附Cr6+的工作吸附容量为14.59 mg Cr6+/g活性炭,工作饱和吸附容量为803.41 mg Cr6+/g活性炭。     

Novel approaches to developing carbon nanotube based polymer composites: fundamental studies and nanotech applications

The adsorption of several types of conducting polymers on carbon nanotubes is investigated by electrical transport measurements. We report the optoelectronic properties occurring in single-walled carbon nanotubes (SWNTs) conjugated polymer, poly(3-octylthiophene), composites. Al/polymer-nanotube composite/indium-tin oxide diodes show photovoltaic behavior proposing that the main reason for this increase is the photoinduced electron transfer at the polymer/nanotube interface. Interesting results were obtained in the case of poly(o-anisidine) (POAS)-multi-walled nanotubes (MWNTs) composites where the increment of monolayers results in a significant improvement of the specific conductivity. POAS-coated MWNTs thin films demonstrated their potentiality as a new class of materials for inorganic vapors detection for environmental applications.     

The properties of equimolar copolycarbonates of bisphenol A with bisphenol S and 1,4-bis(hydroxymethyl)cyclohexane

Ranges of both alternating and random 1:1 copolycarbonates of Bisphenol-A (2,2-bis(4-hydroxyphenyl)propane) and Bisphenol-S (4,4′-dihydroxydiphenyl sulphone) and of Bisphenol-A and 1,4-dimethanoylcyclohexane have been synthesized in order to test the hypothesis that, other things being equal, a more random structured polymer should exhibit superior thermal ageing characteristics. Studies on these materials' mechanical and thermal properties establish that within each pair they are extremely similar and hence the original hypothesis is disproved.     

墩头超长实用堰泄洪安全分析及模型试验验证——以缅甸DAPEIN(Ⅰ)水电站工程为例

以缅甸DAPEIN(Ⅰ)水电站工程为例,论述了将WES实用堰的闸墩墩头向上游超长延伸之后,对泄洪安全所造成的影响。针对WES实用堰流量系数、堰面动水压力容易受边界因子影响的特点,对设计断面的堰顶布置和墩头形状进行了优化。根据堰面空化数计算公式及水流特性推导出计算的关键部位,对空化数进行计算。采用几何比尺为1∶60的物理模型对溢流堰的泄流能力和堰面动水压力进行了试验测试。试验结果表明:溢流堰的模型试验泄流能力和设计泄流能力非常相近。堰面动水压力除工况2的B4测点出现了-1.2 k Pa的微小负压值外,其余堰面时均压强值均大于0。从而,在泄流能力和堰面动水压力两方面都验证了这种设计方案的合理性。该工程所遇到的结构布置问题在中低溢流坝工程中属常见问题,解决思路可为今后类似工程建设借鉴参考。     

大分子相容剂在填充聚烯烃中的应用

综述了国内外大分子相容剂在填充聚烯烃塑料中的应用，以及大分子相容剂改性填充聚烯烃塑料的物理与力学性能；指出大分子相容剂用于填充塑料，能改善高分子基体与填料间界面粘结，提高填充塑料复合材料的物理与力学性能，比传统有机偶联剂更具特点。     

活性炭制作研究进展

活性炭的研究非常活跃。原料的广泛性，工艺的先进性，产品性能的特殊性都受到活性炭使用者的广泛关注，特综述了近年来活性炭研制进展概况并对活性炭的研制作展望。     

Asynchronous decentralized event-triggered control

In this paper we propose an approach to the implementation of controllers with decentralized strategies triggering controller updates. We consider set-ups with a central node in charge of the computation of the control commands, and a set of not co-located sensors providing measurements to the controller node. The solution we propose does not require measurements from the sensors to be synchronized in time. The sensors in our proposal provide measurements in an aperiodic way triggered by local conditions. Furthermore, in the proposed implementation (most of) the communication between nodes requires only the exchange of one bit of information (per controller update), which could aid in reducing transmission delays and as a secondary effect result in fewer transmissions being triggered.     

Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings

Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 13–14, 2004 in Philadelphia, PA.     

Effects of physical refining on contents of waxes and fatty alcohols of refined olive oil

Changes in the contents of waxes and fatty alcohols during deodorization/physical refining of bleached olive oil were studied. Experiments were carried out with 1.85% acidity oil, which was physically refined in a discontinuous deodorizer of 250-kg maximum capacity using nitrogen as stripping gas instead of steam. The variables studied were load and temperature of oil in the deodorizer as well as N₂ flow. Analyses of waxes and alcohols were carried out at different operation times. The maximum content of wax was always observed when the oil reached the deodorization temperature. The variation in the wax content depended on temperature and N₂ flow. Wax decomposition started and continued during the operating time, and a progressive decrease, which was pronounced between 3 and 4 h, was observed. Small changes in waxes were observed between 4 and 5 h. Total content of fatty alcohols diminished throughout the operating time, and changes did not depend on the variables studied.     

DY-1酸洗缓蚀剂的研制与机理研究

通过正交试验设计方法研制了DY - 1新型酸洗缓蚀剂。该缓蚀剂缓蚀率高达 98.4%,加入量少 ,在 5 0℃以下的HCl溶液中对A3钢具有良好的缓蚀作用。通过化学失重法、电化学法及物理测试对DY - 1的缓蚀率、极化电阻和交流阻抗等电化学性能及缓蚀机理进行了研究 ,结果表明DY- 1是以物理吸附的方式吸附于金属表面而起作用。