新型丙烯酸聚氨酯涂料研究

用ＨＤＩ／ＴＤＩ作为交联组分制得的丙烯酸酯型聚氨酯涂料，其综合性能优于用芳香族异氰酸酯预聚体交联的聚氨酯涂料。介绍了制备方法和影响其性能的诸因素。     

冷硬树脂砂增韧机理的研究

系统地研究了附加物对冷硬树脂砂的增韧作用，探讨了附加物对冷硬树脂砂的增韧机理     

S－148芳醇不饱和聚酯树脂耐腐蚀机理研究

合成了Ｓ－１４８芳醇不饱和聚酯树脂，研究了Ｓ－１４８树脂浇铸体和玻璃钢于不同温度下在不同介质中的耐酸、碱、盐腐蚀性能，并探讨了其耐腐蚀机理。结果表明，Ｓ－１４８树脂具有优异的耐腐蚀性能，可用作耐腐蚀制品的基体树脂。     

改性己二胺制备TG301环氧树脂室温固化剂

已二胺经与环氧树脂进行羟烷基化及与丙烯腈进行氰乙基化反应达到改善低熔点低毒性．低脆性的综合效果．文中介绍了改性乙二胶固化剂的制备方法，质量指标和有关固化特性等．     

ADSORPTION OF GALLIUM WITH N_503LEVEXTREL RESIN

ＡＤＳＯＲＰＴＩＯＮＯＦＧＡＬＬＩＵＭＷＩＴＨＮ＿５０３ＬＥＶＥＸＴＲＥＬＲＥＳＩＮＣｈｅｎ，Ｊｉａｎｒｏｎｇ；Ｈｕ，Ｊｉａｎｈｕａ；Ｐｅｎｇ，Ｃｈａｏｑｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ，ＺｈｅｊｉａｎｇＮｏｒｍａｌＵｎｉｖｅｒｓｉｔ...     

铸造用CO2硬化冷芯盒材料及工艺的发展

铸造用CO2硬化粘结剂系统具有气硬冷芯盒的优点,同时又具有环保方面的优势。主要介绍了水玻璃-CO2法、聚丙烯酸钠-CO2法、酚醛树脂-CO2法三种工艺。这些工艺方法近年来国内外研究较多,并且取得了很大进展。     

基于阈值分割的松材线虫病树计数与定位

松材病虫病是最紧迫的威胁之一,最近对中国针叶林造成了严重破坏,为了阻止松材病虫病的快速传播,必须在早期准确检测和计数受感染的树木。提出了一种基于密度图的方法,用于从高分辨率航拍图像中估计具有松材病虫病的树木数量,方法引入了阈值分割、形态处理和超像素技术,以最大限度地减少由于建筑物和岩石等相似背景物体引起的误差。实验表明,所提出的方法优于密度学习 算法,平均绝对误差、均方根误差和绝对误差方差分别从21.3、22.2和127.2减少到8.0、11.7和59.6,计数准确率从54.7%提高到81.3%。     

In-depth investigation on the factors affecting the performance of high oil-absorption resin by response surface method

A series of high oil-absorption resins with low cross-linking degree were synthesized by suspension polymerization using stearyl methacrylate(SMA), 2-Ethylhexyl methacrylate(EHMA), and styrene(St) as monomers.Response surface methodology(RSM) with central composite design(CCD) was also applied to determine the optimal parameters that are mainly known to affect their synthesis. Thus, the effects of the monomer mass ratio(EHMA:SMA), the rigid monomer(St) dosage, the porous agent(acetone) dosage, and their pairwise interaction on the resin's oil-absorption capacity were analyzed, highlighting PSES-R_2 as the resin with the optimum performance. The pure oil-absorption rates of PSES-R2 for gasoline, diesel, and kerosene were 11.19 g·g~(-1),16.25 g·g~(-1), and 14.84 g·g~(-1), respectively, while the oil removal rates from oily wastewater were 98.82%,65.11%, and 99.63%, respectively.     

卡拉胶改性三聚磷酸铝对水性环氧涂层防腐性能的影响

通通过卡拉胶（KC）对三聚磷酸铝（ATP）进行接枝改性获得KC-ATP改性填料,再将其添加到水性环氧树脂（WEP）中制备复合防腐涂层。采用FTIR、XPS、TG、SEM对ATP改性前后的形貌、结构进行表征。结果表明,KC成功地接枝到ATP表面,改善了ATP的水溶性。采用电化学阻抗谱（EIS）和盐雾实验考察了复合涂层的防腐性能。结果表明,复合涂层的防腐性能明显优于纯水性环氧涂层,且当KC-ATP功能填料含量为1.0%时（以水性环氧树脂的质量为基准,下同）,涂层的耐腐蚀性能达到最佳,浸泡48 h后涂层的极化电阻Rp为8.183×107 Ω∙cm2,远高于ATP改性复合涂层和纯环氧涂层。     

Zirconium-Embedded Polyhedral Oligomeric Silsesquioxane Containing Phosphaphenanthrene-Substituent Group Used as Flame Retardants for Epoxy Resin Composites

A zirconium hybrid polyhedral oligomeric silsesquioxane derivative (Zr–POSS–bisDOPO) is synthesized by the corner-capping and Kabachnik–Fields reactions. It is characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR), and then used as a flame retardant in diglycidyl ether of bisphenol A (DGEBA) to endow epoxy resin (EP) with flame retardancy. The flame retardancy, thermal stability, and mechanical properties of the cured EP/Zr–POSS–bisDOPO composites are investigated. The results show that when Zr–POSS–bisDOPO is added by 5–7 wt%, the EP/Zr–POSS–bisDOPO composites pass the UL-94 V-0 rating test. In addition, they have a better flame-retardant effect than pure EP. The combination of Zr atom embedded in the Si O cubic cage and the two phosphaphenanthrene substituent groups in one corner of cubic cage is expected to realize the Zr/Si/P ternary intramolecular hybrid synergistic effect and achieve the possibility of dispersing metal–POSS cages at a sub-micrometer-scale level into polymer matrix. It also proves that Zr–POSS–bisDOPO produces phosphorus-containing free radicals and terminates the chain reactions in gas phase. Meanwhile the Si O Si and Zr O units are retained in the solid phase, which promote the char formation and enhance the flame retardancy. This kind of Zr-doped POSS will be helpful for developing the new metal–POSS hybrid flame-retardant and polymer composites.