Optically tuned superconductive-dielectric resonators with whispering-gallery modes

An analytical method is presented for calculating the resonant frequency andQ-factor of a superconducting dielectric disk resonator operating in millimeter-wave regime with whispering-gallery mode. Resonant frequency shift due to the optical generation of quasi-particles in superconducting film is investigated as a function of photon flux. An optically tunable resonant frequency of about 500 MHz is estimated, and good agreement is found between numerical results and experimental ones.     

注入种子CuBr激光器中的光谱控制

报道了采用注入种子方法．对ＣｕＢｒ激光器进行激光模式控制的实验结果。实现了单纵模ＣｕＢｒ激光脉冲的注入放大，获得了功率为１００ｍＷ水平的窄线宽铜激光辐射．在理论上分析了短脉冲高增益激光器中注入种子过程，讨论了在注入种子ＣｕＢｒ激光器中进行光谱控制的实验结果．     

话音ATM交换的实现─—ATM论坛电路仿真系列建议

近年来，随着ATM主干网络的建设和发展，研究ATM对现有通信业务的支持方式和适配技术是目前ATM技术研究的热点之一。话音ATM交换在降低话音通信成本和简化网络操作环境等方面提供了大量的技术手段，并且支持在单一网络环境中的多种综合业务传输。ATM论坛制定了电路仿真系列建议，话音ATM交换的技术已经基本成熟。文章通过对话音ATM交换在实现和优化方面的技术进行分析，并提出一种基于NativeModeATM的话音通信方式。     

厚沙波沙脊区海底管道用爆破法开沟初探

某区在海上铺设管道,须通过厚沙波沙脊区,采用机械方法施工很困难,应用沉入混凝土管的爆破方法具有投资省,速度快,施工简单的特点。     

临盘油田分层注水管柱有效率影响因素分析

分层注水管柱有效率低一直是困扰临盘油田开发生产的一大难题。针对这一现状，在分析油藏结构、施工工艺和现场资料的基础上，分析了影响分层注水井管柱有效率的因素，阐述了封隔器、工艺操作、管枉自身及温度等制约分层注水管柱有效率提高的原因，并提出了相应的对策和措施。     

双焊缝方矩形钢管生产工艺介绍

介绍了双焊缝方矩形钢管生产技术的特点及冷弯等边槽钢孔型设计参数.通过双焊缝方矩形钢管用冷弯等边槽钢的孔型设计、生产,实现了大截面双焊缝方、矩形钢管的生产,满足了客户的需求.     

布喇格光纤光栅反射特性及制作的理论研究

在对光纤光栅折射率分布进行合理假设的基础上,运用耦合模理论计算了光纤光栅的反射特性,对其反射特性与相关参数的关系进行了分析,并且还推导出了用相位掩模法制造光纤光栅的理论根据,得到了一些有益于光纤光栅制造的结论和有用公式。     

A Novel Method Of Transport Barrier Formation

A novel technique is proposed for creating transport barriers by the rf waves. This is that the transport barriers can be created by the rf induced ponderomotive force itself and no rf induced flow shear generation is necessary. It is demonstrated that the ponderomotive force of the rf waves can stabilize the ion temperature gradient (ITG) mode, considered nowadays as the dominant source of anomalous energy losses in the low confinement (L) mode. It is also shown that this stabilization can be achieved for rather modest values of the rf power and hence should be easily obtained in actual experiments.      

Decisive arrival law parameters and a general finite capacity queueing problem

This paper addresses the problem of finding the parameters of the arrival law which most significantly influence expected occupation and loss of a finite capacity queue. The input process is supposed to be ergodic and wide sense stationary. We show that it is mostly possible to fit an MMPP(2) to the decisive parameters of observational data. Numerical examples illustrate the importance of the decisive parameters, called key parameters, and also show the accuracy of the proposed fitting procedure. Finally, in the appendix we present the solution of the finite capacity queueing problem with Special Semi Markov Process (SSMP) arrivals and a general service strategy.