Stress State of Bent Buried Pipelines

The authors consider edge effects in buried pipelines that occur in the region of joining of a straight buried pipe and a bent insert (factory bend, elbow, or an elastically bent segment). The action of those effects results in the appearance of additional bending moments, which are proportional to the difference between the axial force in an infinite straight pipeline and that in a closed-end pipe, and depend on the geometrical parameters of the pipeline and physical-mechanical characteristics of the soil. Specific examples of analysis of elastic interaction of a pipeline with the soil for pipe bends with various radii of the bend arc are offered. It is shown that additional bending stresses may exceed appreciably the stresses from the axial force, and therefore, they should be taken into account when designing and building pipelines. The solution for an elastically bent segment has been obtained and analyzed.     

大块式动力基础的振动分析与加固处理

根据一大块式曲柄连杆机构的机器钢筋混凝土基础的振动测试与振动分析 ,诊断了基础发生工程事故的原因 ,并结合工程特点 ,在不改变基础设计的动力参数的情况下 ,确定了灌浆加固处理方法 ,并介绍了灌浆加固处理的效果。     

Simulation by Slepian method of plastic displacements of Gaussian process excited multistory shear frame

The object of study is a stationary Gaussian white noise excited multi-degree-of-freedom (MDOF) linear elastic, ideal plastic, linearly damped, statically determinate oscillator with several potential elements of ideal plastic yielding. Specifically the study is exemplified for a plane multistory shear frame with rigid traverses where all the connecting columns except the columns in one or more of the bottom floors have finite symmetrical yield limits. The white noise excitation acts on the mass of the first floor making the movement of the elastic bottom floors simulate a ground motion that interacts with the structure above the bottom floors. The method of study is so-called Slepian model simulation and is in principle the same for other statically determinate MDOF elasto-plastic oscillators of the considered type. The method is fast as compared to direct simulation and provides results that give good insight in the behavior of the plastic displacement response process.     

Dynamic stiffness vibration analysis using a high‐order beam model

This work presents the derivation of the exact dynamic stiffness matrix for a high‐order beam element. The terms are found directly from the solutions of the differential equations that describe the deformations of the cross‐section according to the high‐order theory, which include cubic variation of the axial displacements over the cross‐section of the beam. The model has six degrees of freedom at the two ends, one transverse displacement and two rotations, and the end forces are a shear force and two end moments. Using the dynamic stiffness matrix exact vibration frequencies for beams with various combinations of boundary conditions are tabulated and compared with results from the Bernoulli–Euler and Timoshenko beam models. Copyright © 2003 John Wiley & Sons, Ltd.     

机器人骨骼-肌肉系统工程模拟的动态分析

用振动学理论对仿人机器人骨骼-肌肉系统工程模型进行了分析，并提出了一种控制振动的方法，提高仿人机器人运动精度和缩短达到稳定的时间，同时阐述了这种方法的可行性。     

现场双面动平衡在离心式多级叶轮风机上的应用

对离心式多级叶轮风机进行振动频谱分析，认为叶轮存在动不平衡，造成风机振动超标，采用现场双面动平奢技术消除了风机转轴动不平衡。     

防晃水箱控制高层建筑地震反应的理论研究

防晃水箱是在一般水箱内安置环形防晃板，在高层建筑顶部设置这种水箱可以对建筑物的地震反应作被动控制。本文对这一系统进行了数值模拟，考虑了水箱和结构间的相互耦合作用，研究了水箱对建筑物地震反应的影响，数值分析为合理设计水箱提供了理论依据。     

解析小波及在振动分析中的应用

本文在希尔伯特变换和小波定义的基础上,提出解析小波及解析小波变换,分析了它的一个重要性质即对信号可实现正交滤波、提取包络。最后给出了小波在轴承振动共振解调应用的实例。     

复合棒弯曲振动的矩阵解法

按组成材料和横截面大小的不同，把复合棒分成若干单元，每单元两端的位移，截面转角，弯矩以及剪力间的关系用矩阵表示，各单元矩阵相乘即复到复合棒总的矩阵，最后由此求解复合棒的共振条件，以及两端振速比，还给出了应用例。