碳纳米管在环氧树脂乙醇溶液中的分散性研究

采取硝酸-盐酸回流法对碳纳米管进行纯化,以超声振荡为手段,探究了在乙醇溶液中表面活性剂种类、浓度、复配方法及超声振荡时间等因素对碳纳米管在环氧树脂基体中的分散性能的影响。通过碳纳米管环氧树脂悬浮液的稳定保存时间来观察其分散性能。结果表明,阴离子型表面活性剂十二烷基苯磺酸钠(SDBS)分散效果最好。     

用于纤维材料表面耐磨涂层的制备与性能表征

为使涤纶织物应用范围更广,更耐磨,本文制备了一种有机硅树脂基纳米硼化钛碳化钛复合涂层,通过正交实验法得到最佳的涂层方案,并尝试将其应用于涤纶织物,以改善涤纶织物的表面结构,进而实现涤纶织物表面优异的耐磨性能.为测试涂层对涤纶织物性能的影响, 采用泰伯式耐磨仪、液滴形状分析仪、电子织物强力机、扫描电子显微镜(SEM)研究了涂层织物的耐磨性能、疏水性能、物理机械性能和磨损织物的表面微观形态.研究表明：当有机硅树脂与无水乙醇质量比为75: 25,含量(质量分数)为93%;超分散剂含量为1.5%;乙醇增稠剂含量为1.5%;纳米硼化钛和碳化钛质量比为2: 1,含量为4%时,所得涂层溶液应用于涤纶织物后会形成一层包覆层,耐磨性能最优.对于涂覆量为15 g/m²的涤纶,拉伸断裂强力由573.92 N提高到620.48 N,顶破强力由652.34 N提高到790.07 N,撕裂强力由9.87 N降低到5.78 N,疏水性能有较大提高,接触角可达到120°以上.     

全固态裸露式Ag／AgCl参比电极的研制及应用

该文报道了一种树脂接界全固态裸露式Ag／Agcl参比电极,勿需电镀氯化,制备工艺简单,性能稳定,是对电解型Ag／AgCl参比电极的一大改进。可代替饱和甘汞电极作为通用型参比电极,同时可减少汞对环境所造成的二次污染,在温度大于75℃时仍能保持良好性能,突破了甘汞电极的局限。     

一种高效语音基音检测方法的研究

根据语音信号产生的机理,综合考虑基音频率检测的准确性与高效性,提出了一种基于下采样的基音检测方法.该方法以传统的自相关函数法为基础,结合线性预测逆滤波及下采样技术,有效地提高了抗噪性,降低了计算复杂度.通过Matlab软件对计算结果进行仿真分析,证明新算法计算简便、准确,基音频率平滑性好,算法鲁棒性好,适用于实时语音信号的基音检测.     

Application of functionalised carbon nanotubes immobilised into chitosan films in amperometric enzyme biosensors

A new approach for building a bio-conductive interface for enzyme immobilisation is described. This strategy permits very simple preparation of the enzyme biosensor and also reveals direct electron transfer features. A graphite-epoxy resin composite (GrEC) electrode modified with functionalised multi-wall carbon nanotubes (MWCNTs) immobilised by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide together with N-hydroxysuccinimide (EDC–NHS) in a chitosan (Chit) matrix was prepared and characterised by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in the presence of hexaammineruthenium (III) chloride. It was then used as a base for glucose oxidase (GOx) immobilisation by the simple method of crosslinking with glutaraldehyde (GA) with bovine serum albumin (BSA) as carrier protein. The resulting mediator-free biosensor was applied to the determination of glucose in amperometric mode at different applied potentials and the mechanism of reaction was also investigated by cyclic voltammetry, with and without dissolved oxygen in solution. Analytical parameters, as well as reproducibility, repeatability and stability were determined. Interferences were assessed using different compounds usually present in natural samples, such as wines, juices or blood, in order to evaluate the selectivity of the developed biosensor. The novel combination of carbon nanotubes immobilised with chitosan crosslinked with EDC–NHS and glucose oxidase immobilised by crosslinking with glutaraldehyde offers an excellent, easy to make biosensor for glucose determination without interferences.     

Content-based navigation of music using melodic pitch contours

We describe a system which supports dynamic user interaction with multimedia information using content-based hypermedia navigation techniques, specialising in a technique for navigation of musical content. The model combines the principles of open hypermedia, whereby hypermedia link information is maintained by a link service, with content-based retrieval techniques in which a database is queried based on a feature of the multimedia content; our approach could be described as ‘content-based retrieval of hypermedia links’. The experimental system focuses on temporal media and consists of a set of component-based navigational hypermedia tools. We propose the use of melodic pitch contours in this context and we present techniques for storing and querying contours, together with experimental results. Techniques for integrating the contour database with open hypermedia systems are also discussed.     

低压长袋脉冲袋式除尘器设计与应用

以工业原料尤里卡沥青(EP)为对象，详细论述了低压长袋脉冲袋式除尘器的主要设计环节，着重分析了新型脉冲阀技术。指出了该技术在化肥行业原料干燥、风扫制备等方面的推广应用和发展趋势。     

The perceived quality of in-vehicle auditory signals: a structural equation modelling approach

Abstract

The current study applied Structural Equation Modelling to analyse the relationship among pitch, loudness, tempo and timbre and their relationship with perceived sound quality. Twenty-eight auditory signals of horn, indicator, door open warning and parking sensor were collected from 11 car brands. Twenty-one experienced drivers were recruited to evaluate all sound signals with 11 semantic differential scales. The results indicate that for the continuous sounds, pitch, loudness and timbre each had a direct impact on the perceived quality. Besides the direct impacts, pitch also had an impact on loudness perception. For the intermittent sounds, tempo and timbre each had a direct impact on the perceived quality. These results can help to identify the psychoacoustic attributes affecting the consumers’ quality perception and help to design preferable sounds for vehicles. In the end, a design guideline is proposed for the development of auditory signals that adopts the current study’s research findings as well as those of other relevant research.

Practitioner Summary: This study applied Structural Equation Modelling to analyse the relationship among pitch, loudness, tempo and timbre and their relationship with perceived sound quality. The result can help to identify psychoacoustic attributes affecting the consumers’ quality perception and help to design preferable sounds for vehicles.     

Characterisation of electroplated Sn/Ag solder bumps

Environmental concerns as well as legal constraints have been pushing research on flip chip technology towards the development of lead-free solders and also to new deposition techniques [Z.S. Karim, R. Schetty, Lead-free bump interconnections for flip-chip applications, in: IEEE/CPMT 1nternational Electronics Manufacturing Technology Symposium, 2000, pp. 274-278, P. Wölflick, K. Feldmann, Lead-free low-cost flip chip process chain: layout, process, reliability, in: IEEE International Electronics Manufacturing Technology (IEMT) Symposium, 2002, pp. 27-34, M. McCormack, S. Jin, The design and properties of new, pb-free solder alloys, in: IEEE/CPMT International Electronics Manufacturing Technology Symposium, 1994, pp. 7-14, T. Laine-Ylijoki, H. Steen, A. Forsten, Development and validation of a lead-free alloy for solder paste applications. IEEE Transactions on Components, Packaging, and Manufacturing technology, 20(3) (1997) 194-198, D. Frear, J. Jang, J. Lin, C. Zhang, Pb-free solders for flip-chip interconnects, JOM, 53(6) (2001) 28-32].Binary and ternary tin alloys are promising candidates to substitute lead-content components. In this paper, we describe an electroplating technique for high density FlipChip packaging [M. Bigas, E. Cabruja, Electrodeposited Sn/Ag for flip chip connection, CDE (2003)]. An analysis using Auger Electron Spectroscopy (AES) together with additional Energy Dispersive Xray analysis (EDS) tests and Scanning Electron Microscope (SEM) analysis have been performed to optimize the reflow process of the electrodeposited bumps.     

累托石纳米晶层的高压剥离研究

首次采用物理方法高压制备了酚醛树脂(PF)/累托石(REC)粘土和酚醛树脂(PF)/有机改性累托石(OREC)粘土纳米复合材料,以X射线衍射(XRD)、透射电子显微镜(TEM)及红外光谱(IR)分析了复合材料的物相和显微结构。结果表明,不通过层间高分子聚合反应,在常温高压下,由聚合物分子插入粘土层间,可以形成剥离型树脂/粘土纳米复合材料。在100M Pa和500M Pa下,复合材料中的OREC完全剥离,而REC只有部分被剥离。