Preparation of ultra‐low‐density microcellular materials

Microcellular polymeric materials can be obtained by the polymerization of a high‐internal‐phase emulsion. These materials are good candidates as targets toward inertial confinement fusion. This application requires severe specifications, including a very low density and a small cell size. In this study, we examined the influence of parameters such as emulsification conditions, surfactant nature, and the presence of a porogen on the obtainment of those requirements. It was possible to obtain microcellular polymeric foams with apparent densities as low as 0.0126 g/cm³. However, it was difficult to obtain very low material density and still maintain a small average pore size. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2053–2063, 2005     

从烟草悬浮细胞中分离液泡前体的方法研究

通过跟踪含有液泡前体特异标记物的组分, 利用细胞壁酶水解胞壁制造原生质体, 并用真针头挤压的方法裂解细胞, 用蔗糖密度梯度离心的方法分离液泡前体. 通过相差显微镜观察, 发现所分离的液泡前体保持完整的结构. 利用不同细胞器的标记物抗体进行免疫标记检测, 证明所纯化的液泡前体不含其他细胞器, 具有较高的纯度.     

探讨电石法PVC烟气治理方法

分析了电石法PVC生产链中电石炉烟气及电厂烟气二氧化硫的排放情况,指出利用电石炉烟气中的CO合成氨、再将合成氨用于燃煤电厂烟气的"氨法"脱硫是具有较大应用潜力的循环经济产业链。     

The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

操纵员心理评价方法研究

文章对核电厂操纵员心理定性化评价以及定量化评价方法进行分析和探讨。对轮廓图匹配法和模糊综合评价法的适用范围、应用效果进行了比较分析。该研究的结果可为操纵员评价提供有益参考。     

新型水泥浆实心减轻材料FXW在固井中的应用研究

低密度水泥浆常用泡沫和漂珠作为减轻材料，但泡沫和漂珠的一个共同缺陷是承压能力有限。在现场使用时，地面密度和井下密度是不一致的，这将打破注水泥压力平衡，给固井施工带来一定的风险。为此，通过大量实验，根据颗粒紧密堆积原则，以粉煤灰、改性橡胶粉、微硅、石灰类矿物等为原料，复配出一种新型实心耐压减轻材料 FXW 。由于FXW为实心减轻材料，能够承受压力，因而能够适应井下高压条件。实验表明，FXW低密度水泥浆强度高，韧性好，可更好地满足油气井后期开发需求。     

生物除臭滤池在污水厂污泥处理段的除臭效能

对采用天然有机滤料和合成无机滤料的生物除臭滤池在加拿大多伦多市Ash-bridge’s Bay污水厂污泥处理站的干化和转运段的应用效果进行了分析。详细介绍了污泥脱水工艺、臭气的产生及其组分，进而对软木树皮滤料和矿物合成永久性滤料的除臭效果进行了比较。还讨论了一些具体的运行经验，并采用动态模型对不同条件下的运行数据进行了分析。     

3-D MCM封装技术及其应用

介绍了超大规模集成电路（VLSI）用的3-D MCM封装技术的最新发展，重点介绍了3-D MCM封装垂直互连工艺，分析了3-D MCM封装技术的硅效率、复杂程度、热处理、互连密度、系统功率与速度等问题，并对3-D MCM封装的应用作了简要说明。     

粉煤灰降失水水泥浆在天然气井固井中的研究与应用

长庆天然气田属于低压、低渗透气田,存在承压能力较低的地层,固井设计要求全井段封固,并且采用双级双凝施工工艺。但由于用于低密度水泥浆中的漂珠生产量降低,价格上升,研究应用替代产品是固井技术发展的方向。在一级领浆中研究应用了粉煤灰水泥浆体系,其性能和固井质量可完全满足固井要求。粉煤灰水泥浆体系价格低和固井质量优良,使其成为漂珠水泥浆体系的替代配方。     

岔河集油田开发调整的主要做法与成效

岔河集油田有多个受构造、岩性双重因素控制的中低渗透复杂断块油藏,其主要储集层为河流相沉积。油田20余年的开发历程是典型的滚动勘探开发过程。通过精细科学的地质研究,不断的实践和认识,制定出与其油田地质特点相适应的开发方针,完善了井网部署与加密、产吸剖面调整、油水井配套综合治理等一系列开发对策,并取得了比较好的开发效果。岔河集油田的开发实践对于类似油田开发不乏成功的经验。