钢筋砼框架非线性分析的简化单元模式

介绍一种用于钢筋混凝土框架二阶弹塑性分析的简化单元模式。它考虑了轴力的二阶效应、横截面的塑化和塑性区长度等非线性因素的影响。利用杆件截面的弯矩—曲率关系,可以直接由弹性杆件的转角—位移方程建立单元的非线性刚度矩阵。经与试验结果比较,说明计算结果是正确的。     

高强度烧结钢

为开拓粉末冶金材料新的应用领域，近年来对高强度烧结钢进行了大量的研究与开发。本文简要介绍Ｈｏｇａｎａｓ公司开发的一些高强粉末冶金材料及对一些高强度烧结材料尺寸变化的控制。     

无间隙原子钢的微观结构特征和塑性应变比

采用Ｘ射线衍射的ＯＤＦ和ＬＰ分析技术，ＳＥＭ电子通道花样和蚀坑技术观测，研究了超深冲无间隙原子钢板的微观结构特征。结果表明：控制化学成分、保证基体纯净、优选工艺参数，促进强的γ－〈１１１〉∥Ｎ．Ｄ纤维织构的形成是获得优异成型性的关键。用ＣＭＴＰ方法，由ＯＤＦ织构数据从理论计算了塑性应变比（ｒ），表明ｒｍ值高达３．１８。文中讨论了再结晶织构形成机制。     

圆锥形零件冲压变形与成形载荷的分析

由于悬空侧壁部分的变形状态是圆锥形零件成形的关键，而径向拉应力是实现悬空部分成形的必要条件，同时也是该部分冲压成形成败的关键为此，经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式。同时分析了圆锥形零件的成形载荷。     

基于注塑件收缩率预测的模具型腔尺寸生成方法研究

针对注射模具CAD/CAM系统普遍采用平均收缩率来计算模具型腔尺寸所存在的不足，提出基于注塑件的收缩率预测结果生成模具成型尺寸的方法，并给出注塑件尺寸与模具成型尺寸之间的换算方法。最后通过反求工程中的曲面重构技术完成模具型腔表面的造型。     

Influence of Storage Time and Temperature on Absorption of Flavor Compounds from Solutions by Plastic Packaging Materials

ABSTRACT: Linear low-density polyethylene (LLDPE), oriented polypropylene (OPP), polycarbonate (PC), polyethylene terephthalate (PET film and PET bottle), and polyethylene naphthalate (PEN) were stored in a model solution containing 10 flavor compounds at 4, 20, and 40 °C and flavor absorption by the plastic materials was followed in time. The absorption rate and/or total amount absorbed increased considerably with temperature from 4 to 40 °C. Depending on storage temperature, total flavor absorption by the polyolefins (LLDPE and OPP) was 3 to 2400 times higher than by the polyesters (PC, PET, and PEN). Therefore, in the factor of flavor absorption, polyesters are preferred over polyolefins as packaging material.     

N.m.r. study of the ferroelectric phase transition in a 7030mol% copolymer of vinylidene fluoride (VF2) and trifluoroethylene (TrFE)

Nuclear magnetic resonance (n.m.r.) studies of ¹⁹F nuclei in a $\text{70}\text{30}\text{mol}\text{\%}$ random copolymer of vinylidene fluoride and trifluoroethylene were performed at 9.14 MHz and 20.0 MHz. The free induction decays (FIDs) were analysed in terms of two T₂ components attributed to the amorphous and crystalline portions of the polymer. The changes in crystallinity as well as the effects of the ferroelectric transition were observed during cycles of heating and cooling between 20°C and 140°C. The crystalline component of the FID lengthens by a factor of 2 at 100°C on heating and decreases by this factor at 60°C on cooling, thus exhibiting the thermal hysteresis of this ferroelectric transition. The spin-lattice relaxation was also investigated. From measurements at 9.14 MHz the observed longitudinal relaxation time T₁ appears to be dominated by the dynamics of the amorphous phase and exhibits no anomaly through the phase transition. However, from measurements at 20 MHz, well defined minima of T₁ were observed, which are associated with the ferroelectric transition (especially after repeated annealing of the samples). Results are discussed in terms of the crystalline phase structure, which appears dynamically disordered above the ferroelectric phase transition. An analogy is considered with the plastic phase transitions encountered in molecular crystals.     

精密陶瓷部件近净成型技术的发展

重点介绍了近十年发展起来的陶瓷部件的近净成型技术 ,主要包括直接凝固注模成型、凝胶注模成型、陶瓷注射成型、陶瓷无模成型和微注入成型。对这些新的成型方法的原理、工艺过程及应用特点进行了较全面的分析与比较。