YW－1无机胶的性能及应用

叙述了ＹＷ－１无机胶的粘接强度，耐高、低温性能，耐水、油、酸、碱性能，耐老化性能等，并介绍了这种胶在机械工业方面的应用，举例说明了这种无机粘接可完全取代机械制造业中所有的过盈配合，因而能创造巨大的经济价值。     

Dis-Bond Detection and the Possibility of Interfacial Stiffness Measurement with Real-Time Impulsive Stimulated Thermal Scattering

We describe a new, real-time, noninvasive method for dis-bond (delamination) detection which is based on a technique known as impulsive stimulated thermal scattering (ISTS). We first explain the ISTS technique and compare data from polyimide films tightly bound to silicon substrates with data from unsupported polyimide films. The observed differences in the data from these two cases are readily understandable and offer an unmistakable signature for delaminations. We demonstrate ISTS dis-bond detection by locating and mapping out randomly-distributed and spatially-fine regions of delamination in a polyimide film-silicon substrate system. Finally, we present two simple physical models of the interfacial region which comprehensively describe acoustic data from the tightly-bound and the unsupported samples. With insight from simulations using these models, we suggest how ISTS might be used to determine interfacial adhesion quality and we show how ISTS sensitivity to interfacial effects can be adjusted.     

Adhesion and Hydrolytic Stability of the Interface Between High-Modulus Polyethylene Fibers and Acrylic Resins

The effects of oxyen plasma treatment on the surface chemistry of Spectra 1000® high modulus polyethylene fibers and on the mechanical properties of fiber-reinforced composites of the fibers in a Bis-GMA based acrylic resin have been studied. X-ray photoelectron spectroscopy and diffuse reflectance FTIR spectroscopy have been used to show that the majority of oxygen on the fiber surface exists mostly in the form of ether and/or epoxy linkages, with carbonyl-, carboxylic- and ester-containing compounds accounting for less than 10 percent of the total. While the untreated and plasma-treated fibers have similar chemical compositions, the surfaces of the plasma-treated fibers are more polar and the oxygen is chemically bonded instead of being merely physisorbed. The interfacial shear strength between the fibers and the acrylic resin is increased by a factor of 2.3 by the plasma treatment indicating the presence of a weak boundary layer on the surface of the untreated fibers. The hydrolytic stability of the composite interfaces was investigated for fibers sized with several Bis-GMA-based adhesives. Maximum stability was attained by sizing with Bis-GMA containing a peroxide catalyst or an amine accelerator. The flexural properties of composites utilizing plasma-treated and untreated fibers were compared in three-point bending. The ultimate bending loads for composites using treated fibers were much higher than those for composites with untreated fibers, but only a fraction of that for glass or Kevlar®-reinforced materials.     

氯化聚丙烯改性胶粘剂的合成及粘附性能研究

以甲苯为溶剂，过氧化二苯甲酰(BP0)为引发剂，通过自由基聚合，采用甲基丙烯酸羟乙酯(HEMA)和苯乙烯(St)接枝改性氯化聚丙烯(CPP)。研究了不同苯乙烯用量、不同反应温度、不同反应时间、不同引发剂用量对改性氯化聚丙烯胶粘剂粘附性能的影响，得出较佳的工艺条件为反应温度90℃，反应时问2h，原料配比m(CPP)：m(HEMA)：m(St)：m(BPO)=50：0．5：0．6：0．15。     

Novel pyridinium photoinitiators and their applications for the ultraviolet crosslinking of acrylic pressure‐sensitive adhesives

The demand for ultraviolet (UV)‐crosslinkable pressure‐sensitive adhesives (PSAs) has rapidly been increasing. A variety of different PSAs containing new photoreactive pyridinium derivatives have been evaluated for their effectiveness in improving adhesion and cohesion in UV‐crosslinkable PSAs. PSAs have been evaluated with respect to the tack, peel adhesion, and shear strength. This article summarizes the breakthrough technology used to achieve better performances in UV‐crosslinkable acrylic PSAs. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Effect of rare earth elements surface treatment on tensile properties of aramid fiber‐reinforced epoxy composites

Solutions of rare earth modifier (RES) and epoxy chloropropane (ECP) grafting modification method were used for the surface treatment of aramid fiber. Tensile properties of both the aramid/epoxy composites and single fibers were tested. The effects of RES concentration on tensile properties of aramid/epoxy composites were investigated in detail to explore an optimum amount of rare earth elements in solution for modifying aramid fiber. The fracture surface morphologies of tensile specimens were observed and analyzed with the aid of SEM. The experimental results show that rare earth treatment is superior to ECP grafting treatment in promoting interfacial adhesion between the aramid fiber and epoxy matrix. Meanwhile, the tensile strengths of single fibers were almost not affected by RES treatment. The optimum performance is obtained when the content of rare earth elements is 0.5 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1037–1041, 2004     

Imide-aryl ether benzoxazole random copolymers

Novel imide-aryl ether benzoxazole copolymers were prepared and their morphology and mechanical properties investigated. A key feature of these copolymers is the incorporation of a benzoxazole moiety by the use of 2,2′-bis[4-(3-aminophenoxy)phenyl]-6,6′-bibenzoxazole or 2,2′-bis[4-(4-aminophenoxy)-phenyl]-6,6′-bibenzoxazole as co-diamines in polyimide syntheses. The preparation of these diamines involved the nucleophilic aromatic substitution of 2,2′-bis(4-fluorophenyl)-6,6′-bibenzoxazole with either 3- or 4-aminophenol in the presence of K₂CO₃. The diamines were co-reacted with various compositions of pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline (ODA) to synthesize the desired poly(amic acids). Films were cast and cured (350°C) to effect the imide formation, affording films with elongations between 40 and 110% and moduli in the 2000–2750 MPa range. The copolymers exhibited good dimensional (T_g in excess of 300°C) and thermal stability. Wide-angle X-ray diffraction measurements on the copolymers showed that the ordered morphology characteristic of PMDA/ODA polyimide was retained. Improvements in the auto-adhesion were observed, particularly in those copolymers which displayed a T_g.     

铁电薄膜存储器底电极Pt/Ti的制备及性能研究

应用射频磁控溅射方法 ,在Si基片上采用不同的溅射工艺制备了铁电薄膜底电极Pt/Ti,并分析了在不同温度下退火后材料的电导率性能和粘结力性能 ,从理论和实验上分析了不同的溅射工艺和退火处理对底电极性能的影响。     

高附着力丙烯酸树脂的研制

合成出一种聚酯中间体，以此中间体及其他原料制备了高附着力丙烯酸树脂，这种丙烯酸树脂配成的高附着力涂料性能优良，硬度、丰满度、附着力均得到提高?研究了影响中间体、高附着力丙烯酸树脂及其涂料制备的因素。     

Particle-Substrate Collisions, Particle Rebound and Removal

Recent progress in particle capture and rebound and its effect on the adhesion force is reviewed in this paper. Particles rebound when the incident velocity is greater than a characteristic critical velocity. Lower impaction velocity particles experience elastic and plastic deformation. Recent models for particle rebound and capture are discussed and evaluated in terms of their restrictive assumptions and results. Recent experimental data of particle rebound and capture is also discussed, as is the hydrodynamic removal of captured particles. The removal of particles occurs when the applied hydrodynamic removal force overcomes the adhesion force. The effect of adhesion-induced deformation on the removal of particles is introduced and discussed.