Detecting symmetries of rational plane and space curves

This paper addresses the problem of determining the symmetries of a plane or space curve defined by a rational parametrization. We provide effective methods to compute the involution and rotation symmetries for the planar case. As for space curves, our method finds the involutions in all cases, and all the rotation symmetries in the particular case of Pythagorean-hodograph curves. Our algorithms solve these problems without converting to implicit form. Instead, we make use of a relationship between two proper parametrizations of the same curve, which leads to algorithms that involve only univariate polynomials. These algorithms have been implemented and tested in the Sage system.     

多源信息融合的测井曲线分层算法研究

测井数据解释中,针对单一测井曲线无法真实反映地层属性问题,提出以多条测井曲线的滤波因子为权值,融合出一条综合特征曲线,对该特征曲线相继采用层内差异法细分层与模糊聚类校正分层,实现特征曲线的合理分层。实验结果表明:该方法避免了海量数据处理过程,剔除了噪点数据的影响,提高了分层的速度与精度,能够为应用测井资料进行岩性识别、测井相分析、储层划分等研究提供有利的技术支撑。     

单向Cf/SiC复合材料的弯曲疲劳性能

对单向Cf/SiC复合材料进行了三点弯曲疲劳性能测试,得到了复合材料的应力－寿命曲线（S－N曲线）,并对其进行线性拟合,得到疲劳最大应力与复合材料疲劳寿命的关系;考察了疲劳过程中刚度下降和疲劳裂纹产生情况。结果表明在疲劳过程中复合材料的弯曲模量有3个变化阶段：首先在疲劳加载初期,弯曲模量的下降速度及幅度都较大;其次在弯曲模量下降到原始弯曲模量的85％（133GPa)后,其变化方式没有明显的规律可循,有时甚至可能上升;最后复合材料发生疲劳断裂时,模量将发生突变。显微结构分析表明：基体横向裂纹群的产生是疲劳断裂的独有特征。它的产生是由于基体SiC的断裂应变小于碳纤维的断裂应变,基体首先开裂并导致应力重新分布的结果。     

Mathematical modeling of reverse osmosis systems

The present investigation pertains to modeling of seawater desalination system. A simulation model was developed and verified for a small-scale reverse osmosis system. The proposed model combines material balances on the feed tank, membrane module andproduct tank with membrane mass transfer models. Finally a comprehensive simulation model has been developed incorporating the effect of mass transfer inhibition The model is non-linear differential equation representing the feed concentration as a function of operating time and space. The solution of the simultaneous differential equations was obtained using the fourth order Runge-Kutta method, due to self starting and stability. The model was verified using the experimental data from the literature [17,24]. Parameter sensitivity was carried out to select the proper step size. The simulation was run for over 1000 11 enabling a prediction of operational performance at high overall system recoveries.     

Performance of Methanol Oxidation Catalysts with Varying Pt:Ru Ratio as a Function of Temperature

This paper describes the effects of varying the Pt to Ru ratio in carbon-supported catalysts for methanol oxidation as a function of temperature. Previously these effects were studied in isolation, but now it is shown that the composition of a given catalyst as a function of temperature is extremely important for its activity towards methanol oxidation. Platinum rich 3:2 atomic ratio catalysts perform better than a 1:1 catalyst at 25 °C, where only Pt is believed to be active towards methanol dehydrogenation, since this process is a highly thermally activated process on Ru sites. This result is reversed at 65 °C, where the 1:1 catalyst displays much higher currents across the entire range of polarization. This may result from methanol dehydrogenation occurring on both Ru and Pt sites at higher temperatures. At an intermediate temperature, 45 °C, the 3:2 catalyst is seen to perform better at lower current values, while the 1:1 catalyst is superior at higher current densities, with the crossover occurring at 62 A g^–1. As a consequence, when designing fuel cell catalysts, the composition of the catalyst employed should be tailored with respect to the exact operating conditions, in order to promote optimum fuel cell performance.     

Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003     

石墨材料的疲劳

对迄今前人在石墨材料上所开展的疲劳研究工作进行了综述，以不同的疲劳设计方法为线索，一方面通过对石墨寿命评价的S-N曲线来分析石墨的疲劳行为；另一方面从疲劳裂纹扩展的角度来分析在外应力作用下有预制裂纹的石墨的疲劳行为。总结了石墨疲劳研究的主要进展，归纳了石墨疲劳研究中的关键问题，在此基础上对石墨材料的疲劳研究前景进行了展望。     

Polyaniline as corrosion inhibitor for iron in acid solutions

In recent years, polymer amines have been studied as an efficient corrosion inhibitor for iron in acid media. In this article, the performance of water soluble polyaniline as corrosion inhibitor for iron in 0.5M H₂SO₄ has been evaluated by potentiodynamic polarization, linear polarization, and electrochemical impedance spectroscopy and compared with the performance of the aniline monomer. It has been found that polyaniline is an efficient inhibitor, since the maximum efficiency of 84% has been observed at a concentration of 100 ppm, whereas the monomer has accelerated the corrosion. FTIR studies have shown that the polyaniline is strongly adsorbed on the iron surface and inhibits the corrosion effectively. However, aniline has been found to improve the passivation tendency of iron at higher concentrations. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2144–2153, 2006     

化学镀镍-磷合金机理的研究

通过对化学镀Ni—P合金过程中线性极化电阻及沉积速度的测量,得出极化电阻的倒数1/Rp与电流密度i呈线性关系。用阳极极化曲线的方法,较详细地研究了次磷酸钠在镍电极上的氧化过程。提出了化学镀Ni—P合金是按电化学机理进行的。