聚己二酸1,2-环己二醇酯的合成

采用正交实验方法,分别以钛酸四丁酯和对甲苯磺酸为催化剂,合成了聚己二酸1,2 环己二醇酯,对其合成工艺条件进行了研究,得出了最佳工艺条件。并以所得聚酯合成了具有透明度高、硬度大、耐磨、玻璃化温度高等优异性能的聚氨酯材料。     

高柔韧性聚氨酯丙烯酸酯的合成及应用

选用不同结构的多元醇作骨架，合成一系列高性能的聚氨酯丙烯酸树脂，并通过对聚氨酯丙烯酸树脂性能的对比研究，发现以聚丁二烯二元醇为骨架的聚氨酯丙烯酸酯树脂具有极佳的柔韧性和优异的低温耐曲折性。     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

Specificity of the pheromone system ofAdoxophyes orana andClepsis spectrana

The pheromone system of the summer fruit tortrix mothAdoxophyes orana (Fischer von Röslerstamm) consists of a mixture ofcis-9- andcis-11-tetradecen-1-ol acetate (cis-9- andcis-11-TDA, respectively) in a ratio of 9:1. Substitution of one or both of these compounds by related unsaturated acetates reduced the attractancy. Onlycis-11-TDA could be replaced bycis-11-tridecen-1-ol acetate (cis-11-TriDA), although the 9:1 mixture ofcis-9-TDA andcis-11-TriDA was less attractive in the field than the pheromone system itself. The major component of the pheromone system of the leaf rollerClepsis spectrana (Treitschke)(cis-9-TDA:cis-11-TDA=1:9) could also be replaced bycis-11-TriDA, again with some reduction in attractancy.     

Coking kinetics of a Cr2O3/Al2O3 catalyst during 1-butene dehydrogenation: Effect of H2 partial pressure

The influence has been studied of the partial pressure of hydrogen (0–30 kPa) upon the coking rate of a Cr₂O₃/Al₂O₃ commercial catalyst during 1-butene dehydrogenation. Coke deposition has been analysed using a monolayer-multilayer reversible coke growth model (MMRC model). This model provides good fits to the experimental data, within the range of partial pressure of H₂ studied, and allows us to estimate the main kinetic parameters involved in the coking-deactivation process. The results obtained reveal a dual effect of hydrogen: competition against 1-butene for the active sites and the removal of coke precursors from the catalyst surface. Bom effects diminish the coking rate as the H₂ partial pressure is increased.     

Recent advances in the rheooptical characterization of silicon-containing networks

Recent advances in the various theories of strain-birefringenece of polymer networks are presented. The classical theories as well as the more advanced models are outlined together with some recent theoretical results on poly (dimethylsiloxane). Reference to work on other Si-containing polymers is made. The problems of intermolecular correlations occurring in polymer networks and their effect on the observed optical properties are discussed with reference to the optical-configuration parameter. Conclusions report areas of current research.This review was presented at the Second International Topical Workshop, Advances in Silicon-Based Polymer Science.     

月桂氮草酮研究进展

介绍了月桂氮草酮作为高效皮肤促渗剂的发展概况、合成工艺、研究进展及其应用前景。     

Ink‐eliminated waste paper sludge flour‐filled polypropylene composites with different coupling agent treatments

Ink‐eliminated sludge flour (IESF), waste residue from the recycling treatments of waste paper, was utilized as a new kind of filler to reinforce polypropylene (PP) in this research work. Different coupling agents, including maleated anhydride grafted PP (MAPP), stearic acid (SA), and titanate (NDZ‐101), were used to increase the compatibility between IESF and PP. By using different measurements, the microstructure, morphology, thermal behaviors, and mechanical properties of the IESF/PP composites were investigated in detail. It was found that IESF, as a nucleation agent, not only induced the crystallization orientation of PP but also accelerate the crystallization rate of PP. Just as indicated in the experiments, the presence of IESF has shown the advantages of increasing the dimensional stability, the hardness and the flexural property, and the presence of coupling agents has a favorable effect on the improvement of dimensional stability. Moreover, the coupling agent has minor influence on the mechanical property, even causes some decrease in the impact strength. Among these three coupling agents, MAPP is found to be the best coupling agent for increasing the interfacial adhesion between IESF and PP, and the MAPP addition makes the PP composite possess the quickest crystallization rate and greatest tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 513–520, 2003     

Synergistic Influence of Poly(4-Vinylpyridine) and Potassium Iodide on Inhibition of Corrosion of Mild Steel in 1M HCl

The corrosion and inhibition behavior of mild steel in 1 M HCl in the presence of poly(4-vinylpyridine)(P4VP) and potassium iodide (KI) was investigated using weight loss measurements, potentiodynamic polarization studies and impedance measurements. The inhibition efficiency increased with increasing P4VP concentration. The inhibiting action of P4VP is considerably enhanced by the addition of potassium iodide. The adsorption of this compound either alone or in combination with iodide ions on the metal surface is found to obey Lamgmir's adsorption isotherm. The experimental results suggest that the presence of iodide ions in the solution increases the surface coverage and, therefore, indicate the joint adsorption of P4VP and iodide ions. On the other hand, it was found that the inhibiting effect of P4VP and (P4VP + KI) increased with increasing temperature of the corrosion medium. The presence of these species in the solution decreases the double layer capacitance and increases the charge transfer resistance, both derived from Nyquist plots obtained from a.c. impedance studies. The variation of charge transfer resistance with time suggests that the inhibitive action of (P4VP + KI) depends mainly on the protective inhibitor film formed on the steel surface.     

侧链为亚乙氧基结构的EVOH梳型聚合物的合成

以乙烯-乙烯醇共聚物(EVOH)为原料，制备了一种主链为疏水的聚乙烯链段，侧链具有亚乙氧基结构的多羟基梳形聚合物，用元素分析法、凝胶渗透色谱法、核磁共振谱法对其进行了结构表征；用热重分析法和示差扫描量热法对其热学性能进行了表征。结果表明，接枝后产物的玻璃化转变温度在-52--40℃之间，熔点在55～600℃之间，由于侧链的引入破坏了EVOH的结晶，因此梳形聚合物的热分解温度比EVOH降低了约20℃。