Design of hexa‐band planar inverted‐F antenna using hybrid BSO‐NM algorithm for mobile phone communications

This article presents a new design of multiband planar inverted‐F antenna with slotted ground plane and S‐etched slot on the radiation patch. The proposed antenna is optimized using an efficient global hybrid optimization method combining bacterial swarm optimization and Nelder‐Mead (BSO‐NM) algorithm to cover a very important six service bands including GSM900, GPS1575, DCS1800, PCS1900, ISM2450, and 4G5000 MHz with enhanced bandwidths. The BSO‐NM algorithm in Matlab code is linked to the CST Microwave studio software to simulate the antenna. To validate the results, the antenna is analyzed using the finite difference time domain (FDTD) method. A good agreement is achieved between the results of EM simulation and that produced from the FDTD method. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Spatial and functional relationships between air conduits and blood capillaries in the pulmonary gas exchange tissue of adult and developing chickens

The documented data regarding the three-dimensional structure of the air capillaries (ACs), the ultimate sites of gas exchange in the avian lung is contradictory. Further, the mode of gas exchange, described as cross-current has not been clearly elucidated. We studied the temporal and spatial arrangement of the terminal air conduits of the chicken lung and their relationship with the blood capillaries (BCs) in embryos as well as the definitive architecture in adults. Several visualization techniques that included corrosion casting, light microscopy as well as scanning and transmission electron microscopy were used. Two to six infundibulae extend from each atrium and give rise to numerous ACs that spread centrifugally. Majority of the ACs are tubular structures that give off branches, which anastomose with their neighboring cognates. Some ACs have globular shapes and a few are blind-ending tapering tubes. During inauguration, the luminal aspects of the ACs are characterized by numerous microvillus-like microplicae, which are formed during the complex processes of cell attenuation and canalization of the ACs. The parabronchial exchange BCs, initially inaugurated as disorganized meshworks, are reoriented via pillar formation to lie predominantly orthogonal to the long axes of the ACs. The remodeling of the retiform meshworks by intussusceptive angiogenesis essentially accomplishes a cross-current system at the gas exchange interface in the adults, where BCs form ring-like patterns around the ACs, thus establishing a cross-current system. Our findings clarify the mode of gas exchange in the parabronchial mantle and illuminate the basis for the functional efficiency of the avian lung.     

Fast two-dimensional weighted least squares techniques for the design of two-dimensional finite impulse response filters

This paper focuses on the design of two-dimensional (2D) quadrantally symmetric finite impulse response (FIR) filters, and presents three very efficient algorithms for the weighted least squares (WLS) design with a weight matrix that assigns four different weights to four different frequency bands. The first algorithm seeks for iterative solutions to the matrix equation describing the optimality condition of the design problem. The second algorithm aims at the limit solution of the solution sequence to the first algorithm, analytically obtained by using matrix diagonalization techniques. The third algorithm belongs to the category of iterative reweighting techniques. It uses the second algorithm as its iteration core, and aims at reducing the maximum magnitude error of the filter by iteratively adjusting the four entry values of the weight matrix. Design examples are provided to demonstrate the performance of the proposed algorithms.     

物联网环境下基于B／S模式的监控系统

论文针对区域范围大,管理监控困难和成本高的问题,提出了一种基于物联网技术的,对远端环境变量进行监管和远程控制的实时监控系统。该系统使用B／S模式,实现可非固定式对环境情况的监控;基于Struts2框架搭建系统,实现M、V、c的逻辑分离,以及对监控参数按需修改和方便扩展;使用DAO模式对系统的持久层进行实现;Ajax技术结合jQuery框架,对前端结果进行无刷新式的更新,从而实现无需在中控机房对远程环境进行监控的系统。系统连接短信平台,可随时把异常情况发送给紧急联络人,有利于第一时间采取措施解决问题。本系统具有良好的可扩展性和可移植性,非常便于投入使用和各种扩展功能的实现。     

Adaptive type-2 fuzzy sliding mode controller for SISO nonlinear systems subject to actuator faults

In this paper, an adaptive type-2 fuzzy sliding mode control to tolerate actuator faults of unknown nonlinear systems with external disturbances is presented. Based on a redundant actuation structure, a novel type-2 adaptive fuzzy fault tolerant control scheme is proposed using sliding mode control. Two adaptive type-2 fuzzy logic systems are used to approximate the unknown functions, whose adaptation laws are deduced from the stability analysis. The proposed approach allows to ensure good tracking performance despite the presence of actuator failures and external disturbances, as illustrated through a simulation example.     

Adaptive Decentralized NN Control of Nonlinear Interconnected Time‐Delay Systems with Input Saturation

In this paper, a novel decentralized adaptive neural control scheme is proposed for a class of interconnected large‐scale uncertain nonlinear time‐delay systems with input saturation. Radial basis function (RBF) neural networks (NNs) are used to tackle unknown nonlinear functions. Then, the decentralized adaptive NN tracking controller is constructed by combining Lyapunov–Krasovskii functions and the dynamic surface control (DSC) technique, along with the minimal‐learning‐parameters (MLP) algorithm. The stability analysis subject to the effect of input saturation constraints are conducted with the help of an auxiliary design system based on the Lyapunov–Krasovskii method. The proposed controller guarantees uniform ultimate boundedness (UUB) of all of the signals in the closed‐loop large‐scale system, while the tracking errors converge to a small neighborhood around the origin. An advantage of the proposed control scheme lies in the number of adaptive parameters of the whole system being reduced to one and in the solution of the three problems of “computational explosion,” “dimension curse,” and “controller singularity”. Finally, simulation results along with comparisons are presented to demonstrate the advantages, effectiveness, and performance of the proposed scheme.     

Sliding Mode Control for Swing‐Up and Stabilization of the Cart‐Pole Underactuated System

This paper uses sliding mode control to accomplish the objectives of swing‐up and stabilization of the cart‐pole underactuated system. The features of underactuated systems prohibit direct application of conventional sliding mode control for fully‐actuated systems. In this paper, we design a novel sliding mode control for the cart‐pole underactuated system so that the control goals can be achieved. In addition, by simply changing the parameters of the sliding surface, we use only one sliding mode control scheme to swing up and to stabilize the cart‐pole system. Using the sliding mode dynamics and the internal dynamics, we show that the proposed sliding mode control can swing up the cart‐pole system from the stable equilibrium and can stabilize the system to the unstable equilibrium. Our simulation results on a cart‐pole system demonstrate the feasibility of the proposed sliding mode control. The proposed control schemes, the stability analysis, and the numerical simulation provide a useful guideline for designing the sliding mode control for the cart‐pole underactuated system.     

Adaptive Control of the Electro‐Hydraulic Servo‐System with External Disturbances

The paper deals with the structure of the adaptive control electro‐hydraulic servo‐system (EHSS) with external load disturbances, practical verification of the identification, and control algorithms. The electro‐hydraulic servo system composed of a servo‐cylinder controlled with a servo‐valve is discussed. It is a strongly nonlinear object with parameters changing over time. Adaptive adjuster parameters were determined by means of current identification resulting in the parametric model. Identification was conducted on the basis of measurement of the controlling size and regulated size objects. The identified model of the object was applied to carry out the on‐line synthesis of the proportional–integral–derivative (PID) controller. The selected problems connected with obtaining the algorithm of adaptive control are presented. The computer program for implementing the algorithm with numerical simulation and identification of the control physical model object were calculated. The aim of the research was to examine the effectiveness of the adaptive control method in an electro‐hydraulic servo system, both theoretically and experimentally.     

Consensus of Fractional‐Order Uncertain Multi‐Agent Systems Based on Output Feedback

This paper is devoted to the consensus protocol design for a set of agents with fractional‐order uncertainty dynamics where the fractional order α satisfies 0 < α < 2. For multi‐agent systems (MASs) with fixed undirected topology, a distributed static output feedback protocol is proposed with an undetermined system matrix. Based on model transformation and fractional‐order stability theory, sufficient conditions are derived to ensure the consensus of MASs in terms of linear matrix inequalities (LMIs). Finally, a simulation example is employed to validate the effectiveness of the proposed consensus protocol.     

On Detectability and Observability of Discrete‐Time Stochastic Markov Jump Systems with State‐Dependent Noise

This paper mainly studies the notions of detectability and observability for discrete‐time stochastic Markov jump systems with state‐dependent noise. Two concepts, called “W‐detectability” and “W‐observability,” for such systems are introduced, and are shown to coincide with the other concepts on detectability and observability reported recently in literature. Moreover, some criteria and interesting properties for both W‐detectability and W‐observability are obtained.