SnO2和SiO2用于PVC的阻燃消烟及协同作用

研究了二氧化锡和二氧化硅对软PVC阻燃消烟性的影响。通过对极限氧指数、剩炭率、烟密度的测定和DTATG曲线的分析证明,添加8g二氧化锡/二氧化硅复合阻燃剂的PVC的氧指数和剩炭率比未添加的分别增高5.5个单位和4.1%,烟密度降低16.4%,降解活化能分别降低38kJ/mol和23.1kJ/mol,从而证明二氧化锡/二氧化硅复合阻燃剂对于PVC是一种很好的阻燃消烟剂,二氧化锡和二氧化硅有很好的协同作用。同时证明这种复合阻燃剂能代替三氧化二锑,使产品的成本进一步降低。     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

炭黑填充硬聚氯乙烯的改性

为使聚氯乙烯具有抗静电性能,采用加入具有导电性填料的方法,但加入大量的填料,会使硬聚氯乙烯的冲击性能降低,加工性能变差。本文是在以炭黑为填料的基础上,研究不同的改性剂和加工助剂改进硬聚氯乙烯的效果,结果表明,加入冲击改性剂和加工助剂后,大大增加了硬聚氯乙烯的冲击强度,且加工性能也得到改善,同时由于炭黑具有补强效果,其拉伸强度和弯曲强度在加入改性剂后也能满足使用要求。     

聚氯乙烯(PVC)共混合金──(Ⅰ)聚氯乙烯(PVC)基础知识

本讲主要介绍聚氯乙烯（PVC）的基础知识，如PVC发展史、生产情况、型号、性能、用途及改性的必要性等，使读者对PVC的基本情况有一个大概的了解。     

Electrodialytic extraction of Cu,Pb and Cl from municipal solid waste incineration fly ash suspended in water

The possibility of using fly ash from municipal solid waste incineration (MSWI) in, for example, concrete is considered. MSWI fly ash, however, has too high a concentration of heavy metals, which may cause leaching problems during use or problems with waste handling at the end of the lifetime of the concrete. The Cl content in MSWI fly ash is also too high and will cause corrosion problems in reinforced concrete. The possibility of removing some of the unwanted heavy metals (Cu and Pb) together with Cl from an MSWI fly ash suspended in water using an electrodialytic separation method was investigated. The removal of Pb and Cu was found to be highly pH dependent and the highest contents removed were 41 and 90%, respectively. The Cu concentration of the ash decreased from 2200 to 860 mg kg^?1 but the Pb concentration increased from 8560 to 16 800 mg kg^?1, showing that Pb is mainly found in the ash fraction that is least soluble. Hence electrodialytic treatment of the ash suspended in water is not a solution to improve the ash quality in terms of Pb. The water‐soluble Cl content per unit weight of the original ash was 12.4%. The removal of water‐soluble Cl was efficient and >98% of Cl was removed (calculated on the basis of mean initial and final concentrations). This result indicates that electrodialytic extraction may be a method that can be used for the removal of Cl from ash prior to its utilization in concrete. Copyright © 2006 Society of Chemical Industry     

3-十二烷氧基-2-羟丙基三甲基氯化铵水溶液与烷烃的动态界面张力

用旋转滴法测定了3-十二烷氧基-2-羟丙基三甲基氯化铵（R12TAC）水溶液与系列烷烃的动态界面张力（DIFT），考察了浓度、温度和烷烃链长对DIFT的影响，并详细表征了DIFT随时间的变化过程。根据修正的Word-Tordai方程计算了DIFT的有关参数。结果表明：R12TAC浓度越大，DIFT曲线越低，DIFT下降越快，达平衡值的时间越短；随R12TAC浓度的增大，表观扩散系数Da从2．02×10^-10m^-2·s^-1减小到0．14×10^10m^-2·s^-1，吸附势垒Ea从2．60kJ·mol^-1增大到9．32kJ·mol^-1；温度升高，DIFT降低，表观扩散系数Da升高，而吸附势垒降低；固定一种表面活性剂溶液，测定R12TAC／系列烷烃溶液的动态界面张力，发现R12TAC／正己烷体系的DIFT最低，这与表面活性剂在水和油中的溶船度有关。     

氯化锂－水吸附式再循环型空调制冷系统性能研究

对氯化锂－水吸附式空调系统在再循环运行方式下的性能进行了模拟。分析了再生温度、热交换器效率及蒸发冷却器效率对性能的影响。与开式通风型空调制冷系统的制冷性能相比，再循环型空调制冷系统的制冷能力较大，但性能系数ＣＯＰ较小     

浅谈有堰汽提塔在PVC生产中的应用

介绍了聚合后处理工序—有堰汽提塔的装置特点、工艺以及在生产中的应用。运行应用体现了该装置高效、低耗、环保、优等品率高等特点。     

The effect of ionic strength on soil P reactions is negligible

The electrolyte concentration of the soil solution affects the availability of some nutrients in the soil, especially of P, but it is not know at what salt concentration the reactions start to be significantly affected and their magnitude. This study was carried out to evaluate the effect of rates of potassium chloride (KCl) on some soil parameters that determine supplying of P, K, Ca, Mg, and Al in an unlimed acid soil. Increasing rates of KCl (from zero up to 2000 mg K kg^–1) were applied to soil samples fertilized with 360 mg P kg^–1. Solution (C_li) and exchangeable (C_si) forms of P, Ca, Mg, K, and Al were determined in the treated soil samples after 30-days of incubation; cation activity in solution and their selectivity coefficients were then calculated. Addition of KCl at rates equal to or above 500 mg K kg^–1 caused a large relative increase on P in the soil solution (P_li) but a small and insignificant increase on the absolute value of P_li. All forms of soil K increased with increases on K applied, and buffer power for K varied according to the range of soil K. At all KCl rates, K displaced Ca, Mg, and Al from the solid phase to the soil solution, but had no effect on the extractable values. The relative preference of cations for the adsorption sites increased with increase on cation valency, and only those selectivity coefficients involving K were affected by K applied.