Relationship between bridged groups and antioxidant activity for aliphatic diamine bridged hindered phenol in polyolefins

Four aliphatic diamine bridged hindered phenols were successfully synthesized with aliphatic diamine as the bridged group and 3‐(3,5‐di‐tert‐butyl‐4‐hydroxy‐phenyl)‐propionyl chloride as the material, and their structures were clarified by NMR, Fourier transform infrared spectroscopy, and mass spectrometry. Their performance as antioxidant for polypropylene (PP) and linear low‐density polyethylene (LLDPE) were investigated through the melt flow rate and the oxidation induction time. The thermooxidative stabilities of PP and LLDPE with different aliphatic diamine bridged hindered phenols were assessed by the measurement of the oxidation induction temperature and with long‐term aging testing. The results showed that aliphatic diamine bridged hindered phenols could protect two kinds of polyolefins from thermal oxidative degradation, and the mechanical properties and antioxidant activities of polyolefins stabilized with aliphatic diamine bridged hindered phenols were increased with increasing length of the bridged group for aliphatic diamine bridged hindered phenols at the same concentration of phenolic hydroxyl group. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45095.     

An empirical correlation between glass transition temperatures and structural parameters for polymers with linear and branched alkyl substituents

A new quantitative model is proposed to correlate glass transition temperatures with bond radii-based structural parameters for poly(p-alkyl styrenes), poly-olefins, poly(alkyl methacrylates), and poly(alkyl acrylates). The model provides a consistent prediction of the glass transition temperatures for both the linear and highly branched polymers up to the entanglement offset points for long side groups. Polymers with highly branched side chains, such as t-butyl and t-pentyl groups that contain quaternary C groups, are predicted to have much higher glass transition temperatures, followed by the methylated, the unsubstituted, and the linearly alkylated polymers. The predictions are confirmed by the experimental results from the authors' research and literature. The current model also allows the extraction of the contribution of hydrogen bonding to glass transition temperatures in polymethacrylates and polyacrylates by comparing differences between the modeled hydrogen-bonding free values with the experimental data. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 507–517, 1997     

Effect of different surface treatments on polypropylene composites reinforced with yerba mate fibers: Physical,mechanical, chemical,and morphological properties

This study presents the preparation of post-consumer polypropylene (r-PP) composites filled with 30 wt% yerba mate (YM) stick particles. To improve the fiber–matrix adhesion, three surface treatments were performed: alkaline treatment with sodium hydroxide (NaOH) and use of 3-aminopropyltriethoxysilane (APTS) and maleic anhydride graft polypropylene copolymer (PP-g-MA) as coupling agents. Mechanical properties including tensile, flexural, and impact resistance were determined, and chemical (Fourier transform infrared spectroscopy [FTIR]), physical (water absorption), and morphological analyses were performed. The main findings show that the treatments were efficient in improving the mechanical properties of the composites, with emphasis on the r-PP/YM30/APTS and r-PP/YM30/PP-g-MA composites, which proved to be superior in tensile, flexion and impact strength and absorption of water compared to the untreated composite. The morphological analysis showed a better interaction between the fiber and the polymeric matrix for the composites with YM/APTS and YM/PP-g-MA, which corroborates the results of tensile and flexural strength, as well as with the spectra of FTIR in which the chemical modification of the fibers is observed. However, the results show that these treatments are promising in obtaining composites with recycled matrix with better properties.     

Ethylene polymerization with homogeneous and heterogeneous catalysts based on bis(4‐fluorophenyl)methyl‐substituted bis(imino)pyridyliron complexes

A series of bis(4‐fluorophenyl)methyl‐substituted bis(imino)pyridyliron chloride complexes were immobilized on oxide supports. The kinetics of ethylene polymerization by both homogeneous and heterogeneous systems was followed, the catalysts mostly demonstrating high activities. The effect of the ligands nature and reaction conditions on the catalytic activities and molecular weights of the resultant polyethylenes was examined. In contrast to homogeneous systems, the supported iron complexes were found to exhibit high and stable activity upon activation with triisobutyl aluminium, producing high‐molecular‐weight polyethylene with good morphology. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42674.     

Study on single and binary catalytic systems of pyridine-imine catalysts based on nickel and iron in synthesis of reactor blends and low-density polyethylene nanocomposites

In the presence of modified methylaluminoxane as cocatalyst, the behavior of a binary catalytic system based on pyridine-imine nickel ( N ) and iron ( F ) catalysts was evaluated in order to reach a proper mixture of polyethylene (PE). A computational study along with kinetic profile suggested that the catalyst F with higher electron affinity (A) and electrophilicity (ω) in the methyl cationic active center and stronger interaction with the monomer led to high integrated monomer consumption and higher activity. In addition, the samples produced by the mixture of catalysts showed a higher value of [19.4 × 10⁴ g (PE) mol (Fe+Ni)⁻¹ h⁻¹)], melting point (127.8 °C), and crystallinity extent (41.29%) than the samples produced by the single catalysts. The addition of multiwalled carbon nanotubes (MWCNT) into the polymerization media reduced the activity of catalysts [from 7.50 × 10⁴ to 0.66 × 10⁴ g (PE) mol (Fe+Ni)⁻¹ h⁻¹] and the thermal properties of the low-density polyethylene nanocomposite samples. However, the sample containing 2.33% MWCNT_20-30 improved the total thermal stability of the neat polyethylene blend up to 400 °C. Scanning electron microscope images of the samples demonstrated irregular to virtually uniform morphologies were obtained through the in situ and solution-mixing techniques. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47376.     

Polypropylene composites obtained from self‐reinforced hybrid fiber system

The purpose of the study was to obtain a composite material with the self‐reinforced structure, which processing provide increased mechanical properties. The composites used in presented work were prepared from the two types of fiber mixtures, both were based on polypropylene fibers, the difference was in used cellulose or wood flour filler. Composites were prepared using the hot compaction method. The presented research describes the effect of the composite composition and processing conditions. The results include the static tension measurements, tensile impact tests and thermal analysis, including: DSC and DMTA. The structure has been studies using the SEM observations. Results of presented studies confirm the self‐reinforcing effect in obtained hybrid composites. It provides in the comparison to the standard wood polymer composites to the higher level of material reinforcement with lower amount of natural filler. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43283.     

衣康酸及其衍生物反应挤出改性聚烯烃的研究进展

通过反应挤出的方式, 采用衣康酸及其衍生物对聚烯烃进行接枝改性, 可以显著改善材料性能, 特别是与其他高分子材料的相容性。本文从影响聚烯烃接枝改性的各个因素:聚烯烃类型、引发剂类型以及添加剂出发, 详细论述了国内外研究者的研究进展, 重点阐述了各个因素对聚烯烃改性机理、产物链结构的影响, 认为反应挤出接枝产物链段结构以及螺杆结构对反应挤出的影响这两方面值得进一步研究。     

制备全系列聚烯烃材料的高性能单活性中心催化剂研究进展

高性能单活性中心催化剂的发展给聚烯烃分子链结构的设计与"精确调控"提供了强大的工具,然而设计、制备和优化耐高温多功能催化剂成为制备高性能、高附加值聚烯烃产品的核心。本文回顾了全系列聚烯烃材料的种类,热性能和材料类型与共单体含量之间的关系。重点综述了:①改进型CGC-Ti、半茂钛、非茂铪(锆)等耐高温乙烯/α-烯烃共聚催化剂;②半茂钛、非茂钛等乙烯/(苯乙烯、降冰片烯)系列共聚催化剂;③优化型C2/C1-对称茂锆、耐高温非茂铪等高立构丙烯均聚和等规丙烯-乙烯系列共聚催化剂;④含杂环的C2/C1-对称茂锆高等规1-丁烯本体溶液聚合催化剂。与此同时,对这些催化剂的性能及其相应产物的链结构进行了详细地讨论。最后指出,优化耐高温等规型非茂铪和含杂环或杂原子的C2/C1-对称茂锆以及间规型C1-对称茂锆等多功能催化剂是今后的研究重点。     

Preparation and applicability of functionalized polyethylene with an ethylene/1,7‐octadiene copolymer

The copolymerization of ethylene and 1,7‐octadiene was carried out to synthesize polyethylene with unreacted vinyl groups. The prepared copolymer [poly (ethylene‐co‐1,7‐octadiene) (PEOD)] was epoxidized with peracetic acid, m‐chloroperbenzoic acid, or formic acid/H₂O₂. Of these, peracetic acid gave the best results. Epoxidized PEOD was subjected to a reaction with 2‐mercaptobenzimidazole and poly(L ‐lactic acid). The bromination of PEOD was also performed in the presence of a Br₂/HBr solution at room temperature. The brominated poly(ethylene‐co‐1,7‐octadiene) (PEOD‐Br) was used as a macroinitiator for atom transfer radical polymerization. The polymerization of styrene, butyl methacrylate, and glycidyl methacrylate was performed in bulk or solution at 120°C with a PEOD‐Br/CuBr/2,2′‐dipyridyl initiator system. The thermal properties of the graft copolymers and the efficiency of the graft polymerization were investigated. These graft copolymers have potential applications as interfacial modifiers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Modification of polypropylene via the free‐radical grafting ternary monomer in water suspension systems

Maleic anhydride, styrene, and butyl acrylate were grafted onto polypropylene (PP) via free‐radical polymerization. The grafted product, polypropylene‐g‐(maleic anhydride–styrene–butyl acrylate) (PP‐g‐PMSB), was prepared in a water suspension system, and a nongrafted polymer, poly(maleic anhydride–styrene–butyl acrylate) (PMSB′), was produced at the same time. The optimal synthesis conditions were determined by orthogonal experiments. The crystallinity, thermal stability, melt flow rate, and hydrophilicity of the grafting samples were investigated in the presence or absence of PMSB′. The results indicate that the grafting percentage (G_p) of PP‐g‐PMSB and the content of PMSB′ (C_m) increased as the monomer content increased under the optimum reaction conditions. All of these ternary monomers were grafted onto the PP backbone as long‐chain branches. With increasing G_p, PP‐g‐PMSB's polarity and thermal stability increased, the crystallinity decreased, and the molecular distribution became narrower. The contact angle decreased to 72.12° when G_p was 6.87%. With increasing C_m, the crystallinity and thermal stability of the grafting products decreased compared to PP‐g‐PMSB and the molecular distribution grew wider. The contact angle decreased to 63.51° when C_m was 3.64%; this indicated that the presence of PMSB′ further improved the hydrophilicity of the grafted products. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012