PTA酸化沉淀池的腐蚀及其研究

阐述了ＰＴＡ酸化沉淀池的腐蚀状况、防腐材料的选材试验及防腐措施的研究及其使用效果；分析了Ｍ树脂玻璃钢的应用技术；提出了ＰＴＡ酸化沉淀池采用复合玻璃钢的防腐措施。     

桐油改性酚醛树脂的结构及固化过程的研究

通过桐油与苯酚在酸性催化剂存在下反应，然后再在碱性催化剂存在与甲醛反应制得了一种热固性桐油改性酚醛树脂。利用红外光谱，差示扫描量热法分析技术对改性树脂的结构及固化反应过程进行了研究。     

Gas diffusion and dielectric studies of polystyrene‐fullerene compositions

Polystyrene‐fullerene compositions containing up to 0.45 mol % (3 wt %) fullerene C₆₀ were investigated. It was established that the addition of fullerene to polystyrene (PS) leads to an increase of molecular packing density and so influences the transport of small molecules through the polymer films. Gas diffusion through films of PS‐fullerene compositions is slower than through PS films, and gas separating properties of compositions are higher. Dielectric studies showed that the fullerene is distributed as clusters in the polymer matrix of solid composition prepared from a toluene solution of PS and fullerene. Heating without air to the temperature higher than PS glass transition leads to increasing relaxation time of α‐transition in PS of compositions containing >0.15 mol % (1 wt %) fullerene. This effect is caused by rather strong interaction of PS chains via fullerene molecules entered into the PS‐fullerene complex. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2946–2951, 2002     

新型环氧树脂绝缘浸渍胶（WSK）在微特电机上的应用

介绍了新型环氧树脂少溶剂快干绝缘浸渍胶的性能试验数据及基在微特电机上的应用及注意事项。     

Use of inverse gas chromatography to quantify interactions in amine cured epoxy resins

Flory–Huggins interaction parameters, λ, were determined for a series of probes in an amine cured epoxy resin matrix (433–493 K) and its precursors (324–363 K) by inverse gas chromatography (IGC). Hildebrand–Scatchard theory was combined with Flory–Huggins theory in order to estimate infinte dilution solubility parameters (δ₂) for the matrix and its precursors at 298 K. It was shown that the value of the solubility parameter for the cured resin matrix lies between those of its precursors. Compared to the majority of published work, an unusual aspect of this application of IGC is that solubility parameters have been determined when the stationery phases are (i) small molecules and (ii) a highly crosslinked polymer. Moreover, all possible attempts have been made to ensure equilibrium conditions between probe and stationary phase, and compensation for asymmetry of peak profile has been applied in determining δ₂. The solubility parameters estimated by IGC are in good agreement with those calculated by other methods.     

On the curing of a vinylester-urethane hybrid resin

Curing kinetics of a vinylester-urethane hybrid (VEUH) resin consisting of vinylester resin (VE) diluted in styrene and novolac type polyisocyanate (NPI) have been studied by differential scanning calorimetry (DSC). As VEUH is crosslinked via free radical polymerisation between the vinyl functions of styrene and VE, and polyaddition reaction between the secondary -OH groups of VE and -NCO of NPI, it was necessary to study these reactions separately. This was achieved by studying the curing with and without incorporating the NPI. The curing reaction was monitored by measuring the heat of reaction under isothermal and dynamic temperature conditions. Models describing the curing were developed, which are in good agreement with the experiments. A comparison between the curing of the VEUH and the VE resin without NPI leads to the conclusion that the curing of the VEUH as accessed by DSC is dominated by the radical polymerisation of styrene with VE although the two reactions are not time separated.     

MBS树脂改性PVC的研究

研究了不同类型及用量的MBS树脂对PVC抗冲击性、光学性能、拉伸性能及加工塑化性能的改性效果以及加工条件等因素的影响。结果表明 :在低用量条件下 ,随MBS树脂含量增加 ,MBS/PVC抗冲击性能有所提高 ,光学性能略有下降。此外 ,MBS/PVC制品的拉伸性能和加工性能受MBS树脂类型及用量影响不大。     

异丁烷与丁烯在炭化树脂负载PW_(12)催化剂上的烷基化

探讨了炭化树脂负载杂多酸PW1 2 催化剂制备的适宜条件 ,反应工艺条件对催化剂催化异丁烷与丁烯烷基化反应及产物分布的影响 ,分析了催化剂具有较高活性的原因 ,进行了催化剂稳定性实验。并与其它类固体酸催化剂进行了对比。     

耐高温绝缘GFRP管的真空辅助树脂传递成型工艺研究

阐述了耐高温绝缘GFRP管的成型工艺及原材料选择，并对影响成型工艺的主要因素作了理论分析及试验验证。研究表明，以TDE－85／DDS体系为为基体，以无碱无捻玻璃纤维方格布为增强材料，用VARTM工艺成型的石油勘探高性能平衡管完全满足技术要求。     

硫脲型整合树脂在分析上的应用 Ⅰ.岩样中微量银的中子活化分析

前言银和其他贵金属元素一样,在地壳中比较稀少,按其自然丰度为第67号元素,平均含量仅0.07 ppm。由于地质样品成分非常复杂,为测定其微量银,必须进行严格的化学分离。但是迄今文献中报道的许多分离分法,步骤都相当冗长,一般采用氯化银反