Kynar—500涂装工艺与涂层性能研究

介绍了Kynar－500涂料的涂装工艺，并对涂层的性能作了试验与分析。     

Significance of Wood Terpenoids in the Resistance of Scots Pine Provenances Against the Old House Borer, Hylotrupes bajulus, and Brown-Rot Fungus, Coniophora puteana

We tested how terpenoid (i.e., monoterpenes and resin acids) composition and concentration in wood affects resistance against wood-borers and decaying fungi. Scots pine (Pinus sylvestris) wood from nine provenances having variable terpenoid profiles was studied against the old house borer, Hylotrupes bajulus, and the decay fungus, Coniophora puteana. Provenances represented a 1200-km N-S transect from Estonia to northern Finland, but they were all cultivated for 7 years in the same nursery field, in central Finland. Mean relative growth rate (MRGR) of small H. hajulus larvae positively correlated with the total monoterpene concentration of wood, and feeding was associated with high proportion of levopimaric+palustric acid in wood. Provenance did not affect the MRGR of small or big larvae, but big larvae consumed more wood and produced more frass on the northern Ylitornio trees than on the southern Rakvere and Ruokolahti trees. Low beta-pinene and total monoterpene concentration and low beta: alpha-pinene ratio in wood were all associated with a high number of eggs. The most northern Muonio provenance was the most favored as an oviposition site, differing significantly from Saaremaa, Tenhola, and Suomussalmi. Wood from Saaremaa, Tenhola, Ruokolahti, and Suomussalmi provenance was most resistant against decay fungus, differing significantly from that of Kinnula provenance. However, decay resistance was not clearly associated with the concentrations of wood terpenoids. These results suggest that monoterpene composition of wood affects resistance against wood-boring Cerambycid beetles, but resistance against wood-decaying fungi is not as clearly associated with wood terpenoids.     

改性脲醛树脂胶粘剂的研究

主要利用混合改性剂，改进生产工艺以及施胶时加入填料等方法研究脲醛树脂胶粘剂的游离甲醛含量，剪切强度、耐水性等问题，得到低毒，综合性能良好的胶粘剂。     

Comparing the Variation of Needle and Wood Terpenoids in Scots Pine Provenances

We determined variation in both the concentration and composition of terpenoids in needles and wood within nine Scots pine (Pinus sylvestris) provenances. Seedlings of different provenances representing a 1200-km N–S transect from Estonia to northern Finland were cultivated in Suonenjoki nursery field, central Finland, for seven years. Growth of seedlings and the number of vertical resin ducts in wood were also determined. -Pinene and 3-carene were the major monoterpenes both in the needles and wood. The total monoterpene concentration was about five times higher in the needles than in the wood. A strong positive correlation was found between proportional quantities of several terpenes of the needles and wood, particularly for 3-carene, sabinene, and terpinolene. The needles contained both labdane-type and tricyclic resin acids, whereas the wood contained only tricyclic ones. The wood had a four times higher tricyclic resin acid concentration than the needles. The highest total monoterpene concentration in the needles and in the wood occurred in the most northern Muonio provenance and in the most southern Saaremaa provenance plants, respectively. The amount of high 3-carene genotype trees decreased among the northern provenances. The wood of the most northern Muonio provenance showed the lowest total resin acid concentration, but provenance did not affect total tricyclic resin acids in the needles. Korpilahti provenance trees from central Finland had the best growth in height. In addition, Korpilahti and Ruokolahti provenance trees showed largest radial growth of stem and smallest number of vertical resin ducts. The results suggest that especially the proportional quantity of 3-carene in the needles could be used in estimating the amount of this compound in the wood and vice versa.     

离子交换树脂非均相催化乙酰化合成乙酰甲胺磷

研究了在间易搅拌釜中以阳离子交换树脂为催化剂，由甲胺磷催化乙酰化合成乙酰甲胺磷。分别考察了不同类型离子交换树脂的催化乙酰化作用。并且研究了搅拌速度，催化剂用量以及反应温度对乙酰化反应的影响。研究结果表明，以NKC9型离子交换树脂在333.15K温度下具有最好的催化乙酰化作用。     

补强剂和共混工艺对PA/PVC/NBR三元共混弹性体性能的影响

在选择三元共聚尼龙（PA）、聚氯乙烯（PVC）、丁腈橡胶（NBR）为主体材料，制备PA／PVC／NBR（10／30／60）三元共混弹性体的工作基础上，进一步探讨了填料品种和用量，共混温度，加料顺序等因素PA／PVC／NBR三元共混弹性体的影响。试验结果表明：在PA／PVC／NBR（10／30／60）共混体系中，补强型填料的补强效果优于非补强型的填料，6种填料补强效果依次是：快压出炭黑＞半补强炭黑＞白炭黑＞活性重质，CaCO3＞陶土＞滑石粉，快压出炭黑的适宜用量是20－50份。在制备PA／PVC／NBR三元共混物时，适宜的共混温度是122－140℃，并且采用二段法混工艺制得的共混物性能优于采用一段法共混工艺。     

2,4,6-三溴苯胺对环氧树脂固化物阻燃耐热性的影响

用氧指数 (LOI) ,TG法测定研究了 2 ,4,6-三溴苯胺 (TBA)对环氧树脂酸酐固化物阻燃耐热性的影响 ,结果表明 TBA能较好地阻燃树脂固化物 ,TBA与 Sb2 O3 和磷酸三苯酯 (TPP)配用时具有阻燃协同效应 ,且对环氧树脂酸酐固化物的热稳定性影响较小。     

Morphology and thermomechanical properties of nanostructured thermosetting blends of epoxy resin and poly(?-caprolactone)-block-polydimethylsiloxane-block-poly(?-caprolactone) triblock copolymer

Poly(?-caprolactone)-block-polydimethylsiloxane-block-poly(?-caprolactone) triblock copolymer (PCL-b-PDMS-b-PCL) was synthesized via the ring-opening polymerization of ?-caprolactone with dihydroxypropyl-terminated PDMS (HTPDMS) as the initiator. The triblock block copolymer was characterized by means of Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). The triblock copolymer was incorporated to prepare nanostructured thermosetting blends. The morphology of the epoxy thermosets containing PCL-b-PDMS-b-PCL were investigated by means of atomic force microscopy (AFM), transmission electronic microscopy (TEM) and small-angle X-ray scattering (SAXS). The thermomechanical properties of the nanostructured blends were investigated by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The formation of the nanostructures in the thermosetting composites was judged to follow the self-assembly mechanism in terms of the difference in miscibility of PDMS and PCL subchains with epoxy resin after and before curing reaction.     

新型硅改性丙烯酸酯压敏胶的研究

MQ硅树脂可用作改性聚丙烯酸酯类压敏胶,在保持较好力学性能(初粘性、持粘性和剥离强度)和绝缘性的同时,可较大地提高硅改性压敏胶的耐高温性能。MQ树脂的结构和压敏胶的性能用29Si-NMR,DSC,粘性等表征。MQ硅树脂含量对硅改性压敏胶性能影响极大,通常MQ硅树脂用量为(0.3～0.5)%时具有较好的综合性能。该压敏胶粘剂可以直接涂布于经电晕处理的聚酯膜制备压敏胶粘带,便于工业化生产。     

户外像素管软质灌注胶的研制与应用

采用脂环族环氧树脂、柔韧性环氧树脂、改性脂环胺类固化剂为主要原料，研制出户外像素管灌注软胶，产品具有耐紫外线辐照、耐冷热冲击、粘接性好等特点。介绍其制备方法、性能及用。