结晶法净化湿法磷酸生产磷酸二氢钾研究

研究了三聚氰胺结晶法净化湿法磷酸复分解生产精细磷酸二氢钾工艺中磷酸三聚氰胺与氯化钾反应生产磷酸二氢钾的工艺条件。采用二次正交组合实验设计，对反应过程中反应温度，反应时间，搅拌速度，氯化钾用量，氯化钾初始浓度等诸因素的一次作用，二次作用及交互作用对五氧化二磷转化率的影响进行了研究，得到了适宜的工艺条件，所得磷酸二氢钾达到HG2321－91质量标准。     

铜掺杂对(Na0.5K0.5)NbO3无铅压电陶瓷性能的影响

采用传统固相反应法对(Na0.5K0.5)NbO3压电陶瓷进行铜掺杂改性研究。使用SEM、XRD并结合常规压电陶瓷性能测试手段对该体系的显微结构、压电性能等进行表征。研究结果表明:CuO的掺入使材料出现“硬化”现象,即材料的压电系数d33、平面机电耦合系数Kp和介电损耗tanδ下降了,机械品质因子Qm大大提高;CuO掺入量在1%mol时各项性能最佳。另外,从SEM图片中可以看出:(Na0.5K0.5)NbO3压电陶瓷材料的平均晶粒尺寸随着CuO掺入量的增加明显变大。这表明CuO有烧结助熔作用,能降低烧成温度。     

硫酸铀酰印迹离子交换树脂的合成及识别特性研究

为进行稀溶液中铀的浓缩,以硫酸铀酰为模板、二乙基烯丙基胺为功能单体,在水中采用自组装分子印迹技术制备了硫酸铀酰印迹离子交换树脂.对树脂合成条件进行了优化,研究了pH值对吸附量的影响、分子印迹聚合物MIPs-4的等温吸附与吸附动力学、柱内吸附与淋洗曲线等树脂识别性能.结果表明:印迹树脂对硫酸铀酰的吸附性能比非印迹树脂好,可以在pH=1～6范围内应用,并在pH为2左右时吸附能力最强.MIPs-4树脂的吸附等温线为"优吸"型,吸附在约3h达到平衡.当C0=0.125mg·mL-1时,Kd=0.249L·g-1.吸附液ρ(U)=1.0 mg·mL-1、接触时间4min进行的柱内试验得出MIPs-4的穿透体积、穿透容量和饱和容量分别为柱内树脂的床体积(BV)的22倍、21.6 mg·mL-1和36.2 mg·mL-1.以0.05 mol·L-1 H2SO4 1.0 mol·L-1 NaCl为淋洗液时,淋洗体积仅4BV,流出液中最大铀浓度达到17.6 mg·mL-1.印迹树脂的吸附和解吸性能好,可应用于低浓度铀的浓缩及含铀废水的处理.     

青岗钾肥厂试车小结

为满足农业生产上对硫酸钾的需求，化工部上海化工研究院复肥所着重开发了硫铵转化法的生产工艺，并在推广过程中，针对操作工艺和设备上所存在的问题，继续探索，取得了新的结果。该技术已用于青岗钾肥厂万吨级硫酸钾生产装置。本文着重介绍了该装置在试车过程中所发生的问题及处理方法。     

氧化铁生产废液的治理和利用

氧化铁生产产生的含铁硫酸铵废液和洗涤废水中含有铁、硫酸根、铵等离子。采用化学沉淀、过滤、蒸发等方法处理该废水可回收废水中的硫酸铵、氧化铁、处理后的废水可回用于生产。     

硫酸法钛白粉生产中钛液的分析和铁分离

以硫酸法钛白粉生产工艺中间体浓钛液(硫酸氧钛)和偏钛酸为原料,分析了浓钛液中二氧化钛和铁的含量。总Ti的测试采用Al片还原法和高铁盐氧化还原滴定法,浓钛液中Ti3 直接用高铁盐氧化还原滴定法测定,铁含量用KMnO4氧化还原滴定法进行分析。采用无机陶瓷膜洗涤分离方法考查了水解后偏钛酸中的除铁效率,利用分光光度法和火焰原子吸收法分别测定洗涤液和二氧化钛粉体中的铁含量。试验表明,无机陶瓷膜洗涤分离方法可以将二氧化钛粉体中铁含量降到30×10-3‰以下,煅烧后产品白度大于94。陶瓷膜洗涤工艺可以实现连续操作,是一种值得推广的新工艺。     

复分解四步循环法制取硫酸钾新工艺

介绍了制取硫酸钾的一种新工艺－－复分解四步循环法，即氯化钾与硫酸铵反应生成硫酸钾铵与氯化铵钾，硫酸钾铵再与氯化钾溶液反应生成硫酸钾，氯化铵钾再与硫酸铵溶液反应生成氯化铵。整个工艺全封闭循环生产，产品硫酸钾K2O质量分数≥50％，钾收率达92％。     

复分解法制备磷酸二氢钾的研究

介绍了以工业氯化钾和工业磷酸为基本原料，采用复分解法，在氯化钾过量的情况下，加入氨水作为pH值调节剂，制备磷酸二氢钾（KH2PO4）的研究。产品含量大于92％，原料转化率（以磷酸计）大于85％，无三废产生。     

Crystallography and equilibrium solubility for ammonium and potassium orthophosphites and hypophosphites

The composition and solubility properties of eight ammonium and potassium orthophosphites and hypophosphites were determined to evaluate the potential of these classes of materials for increasing the plant nutrient content of liquid fertilizers. Phase relationships for the systems (NH₄)₂O-P₂O₃-H₂O, K₂O-P₂O₃-H₂O, (NH₄)₂O-P₂O-H₂O, and K₂O-P₂O-H₂O were determined along with the crystallographic properties (X-ray and optical) of the solid phases. Toxicity and phosphite response was tested in greenhouse experiments for the compounds.     

Balanced pasture fertilization in the Basque Country: I. Phosphorus and potassium budgets on dairy farms

Dairy farming is the main agricultural activity of the Basque Country. A dairy farm is characterized as a system with soils and crops, forage, cattle and manure as main components, and in such a system, nutrient cycling is very important to maintain soil fertility and optimize forage production. To quantify nutrient transfers in the cycle, a simple system was developed and has been applied to seventeen farms to examine its ability to achieve a balanced P and K fertilization. These farms have provided data on inputs (fertilizer, feeds, concentrates), pasture and manure management, and outputs (milk production), and soil samples have been taken from farm pastures. Phosphorus and K in excreta and uneaten pasture is used with a relatively high efficiency as suggested by the relatively high efficiency of P and K utilization by the pasture that usually ranges from 70 to 90%. Concentrate feeding (3000 kg cow^–1 yr^–1) represents one of the main P and K inputs in Basque Country dairy farms, averaging 26 and 66 kg ha^–1, respectively. Besides, release of K in the soil through slow liberation from non-exchangeable sites was estimated as 30 kg ha^–1. Thus, a high efficiency in excreta recycling would diminish substantially P and K mineral fertilizer needs. Farm nutrient budgets appear to be a convenient tool for determining nutrient shortages and surpluses at farm level, and thus they are considered as a first step to support a better management of maintenance fertilization of permanent pastures.