Review of Le choc de l'informatique: Les répercussions psychosociales et le r?le des attitudes.

Reviews the book, ILe choc de l'informatique: Les répercussions psychosociales et le r?le des attitudes by Serge Guimond and Guy Bégin (1987). This monograph is concise and easy to read. The reader knows immediately that technological questions will be explored, as well as the psychological and human questions being attached to the new use of information technology. Three fields are covered, each one the subject of a chapter: 1) computers in the educational circle; 2) computers and work; and 3) computers in the house. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of Calcium Lactate, 4-Hexyl Resorcinol and Vacuum Packing on Physico-chemical, Sensory and Microbiological Qualities of Minimally Processed Litchi (Litchi chinensis Sonn.)

Litchi (Litchi chinensis Sonn.) fruits are very susceptible to pericarp browning which adversely affects consumer acceptability even though the aril portion remains in excellent condition. Litchi arils (litchis) were treated with a solution containing 0–2% (w/v) calcium lactate (CL), 0–0.02% (w/v) 4‐hexyl resorcinol (4‐HR) and 1% potassium sorbate. The pH of solution was adjusted to 4.0 with citric acid. Treated litchis were packed in polystyrene trays, over‐wrapped with polypropylene film, vacuum‐packed (0, 47409.3, 94831.9 Pa) and stored at 4 ± 2 °C. Drip losses, pH, total soluble solids (TSS), sensory attributes and microbiological quality of stored samples were estimated. A four‐factor, three‐level experimental design (D₆ Hokes design) with 19 experiments was chosen. Mathematical models were developed to analyse and predict the effect of CL, 4‐HR, in‐package vacuum and storage time on the responses. TSS, pH and sensory scores decreased significantly (P 0.01), whereas drip losses and microbial count increased significantly (P 0.01) with time. Drip loss was significantly (P 0.1) reduced by addition of CL. 4‐HR prevented browning and changes in colour score during storage were significantly less. Vacuum in packages exerted significant (P 0.01) effect over pH, TSS, sensory and microbiological qualities of minimally processed litchis.     

Synthesis of polypropylene‐graft‐maleic anhydride compatibilizer and evaluation of nylon 6/polypropylene blend properties

Polymer blends based on polyolefins are of a great interest owing to their broad spectrum of properties and practical applications. However, because of poor compatibilities of components, most of these systems generally exhibit high interfacial tension, a low degree of dispersion and poor mechanical properties. It is generally accepted that polypropylene (PP) and nylon 6 (N6) are not compatible and that their blending results in poor materials. The compatibility can be improved by the addition of a compatibilizer, and in this study PP was functionalized by maleic anhydride (MAH) in the presence of an optimized amount of dicumyl peroxide (DCP). The reaction was carried out in the molten state using an internal mixer. Then, once the compatibilizer polypropylene‐graft‐maleic anhydride (PP‐g‐MAH) was prepared, it was added at various concentrations (2.5–10 wt%) to 30/70 glass fibre reinforced N6 (GFRN6) PP, and the mechanical properties were evaluated. It was found that the incorporation of the compatibilizer enhanced the tensile properties (tensile strength and modulus) as well as the Izod impact properties of the notched samples. This was attributed to better interfacial adhesion as evidenced by scanning electron microscopy (SEM). The optimum in these properties was achieved at a critical PP‐g‐MAH concentration. Copyright © 2005 Society of Chemical Industry     

Morphology development in polyethylene/polystyrene blends: the influence of processing conditions and interfacial modification

The influence of processing conditions and interfacial modification on the morphology evolution and the composition range within which fully co‐continuous high density polyethylene/polystyrene blend structures can exist during blending in a single screw extruder was studied. Blends ranging from pure A to pure B component, with and without compatibilizer, were prepared under two different shear rates. It was found that high shear rates displaced the breakdown–coalescence balance of the dispersed nodules to the side of coalescence, narrowing the percolation domain and the critical composition for full co‐continuity decreased with increasing shear rates. The addition of a tri‐block compatibilizer induced the percolation threshold of the polystyrene phase to begin at lower percentages of polyethylene but the phase inversion point did not change. The experimental results are discussed in the light of various theoretical models. Copyright © 2005 Society of Chemical Industry     

基于公共存储器进行数据交换的高速数字图象处理系统

本文介绍了一种基于公共存储器进行数据交换的高速数字图象处理系统．给出了公共存储器的设计，描述了处理器对公共存储器的进程同步控制．     

Pultruded fibre reinforced polyurethane composites II. Effect of processing parameters on mechanical and thermal properties

This paper presents a novel process for the fabrication of pultruded polyurethane (PU) composites. The effects of the processing parameters on the mechanical properties (flexural strength and flexural modulus, etc.) and thermal properties (HDT) of the fibre reinforced PU composites by pultrusion have been studied. The processing parameters investigated include pulling rate (in-line speed), die temperature, filler type and content, and post-cure time and temperature. Results show that the composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio, the mechanical properties and the thermal properties of composites, the optimum die temperature can be determined. It is found that the mechanical and thermal properties increase with filler content for various types of filler. The mechanical and thermal properties increase at a suitable post-cure temperature and time. Furthermore, the properties which decreased due to the degradation of composite materials for a long post-cure time will be discussed.     

袖珍计算机放射性总量测量系统

本文介绍以PC-1500(A)型袖珍计算机为主体的地面放射性总量数据采集及处理系统的方案、硬件、软件及应用。     

广义de Bruijn多计算机互连网络

（ｄ，ｍ）ｄｅ Ｂｒｕｉｊｎ多计算机系统互连网络限制网络的规模必须为ｄ＾ｍ。本文把（ｄ，ｍ）ｄｅ Ｂｒｕｉｊｎ网络推广到了任意顶点情形，提出了广义ｄｅ Ｂｒｕｉｊｎ网络，研究了广义ｄｅ Ｂｒｕｉｊｎ网络的自路由性质，设计了路由算法，研究了广义ｄｅ Ｂｒｕｉｊｎ网络顶点度的性质和容错特性。     

The Mona Lisa identification: Evidence from a computer analysis

A recent computer-aided study identified the model immortalized in Leonardo da Vinci's celebratedMona Lisa to be none other than the artist himself. A follow-up investigation empolying similar techniques identifies the subject of asecond HiddenMona Lisa by the same artist. Analysis of photographic and x-ray images indicates that Leonardo first created a sketch of Isabella, Duchess of Aragon, which he later painted over with theMona Lisa, using himself as the model.