抗氧剂3114合成反应热力学和动力学的研究

研究了常温溶剂法合成抗氧剂3114反应热力学和动力学过程。控制温度在117±2℃,研究结果表明,反应是零级反应,反应速率常数k=1.91×10-3/min,反应的平衡常数K=138.4(mol/L)-6,反应活化能Ea=1366.2J/mol。     

Correlation of reactivity and electrical resistivity of coke

A correlation between the reactivity and electrical resistivity of a series of cokes was determined using cokes prepared from blends of medium- and high-volatile coals. After correcting for the ash yield of the coke and the density of the resistivity specimen, a statistically significant relation between reactivity and resistivity was established. As the resistivity test requires much less time to perform than the reactivity test, it can be considered as an alternative approach to reactivity testing currently performed for quality control purposes.     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

水合肼生产中氧化反应的研究和应用

分析了尿素法生产水合肼的氧化反应历程及影响因素，改进了反应器，并找到了最佳的工艺控制条件：①控制n(尿素)：n(次氯酸钠)=(1．05～1．10)：1，各原料的消耗较低，总经济效益佳；②采用-5℃冷冻盐水移走尿素、次氯酸钠混合段内氯化反应放出的热量，控制物料混合终点温度在15～30℃；③采用列管式加热器，将氯化反应与水解反应在不同的设备中进行，水合肼的收率提高到83％～85％；④采用列管式加热器代替双夹套反应器，提高了加热强度，生产能力大，1套合成反应器可生产1万t／a80％的水合肼。     

环氧SBS开环制备顺酐化离聚体及其物化性能的研究

利用环氧化苯乙烯-丁二烯-苯乙烯嵌段共聚物（ESBS）的环氧基与顺丁烯二酸氢钾（HKM）在相转移催化剂和开环催化剂存在的条件下开环反应制得钾离聚体。研究了其反应条件，由于添加了助剂BM，环氧基开环率达到了95．2％，并用FTIR确定了离聚体的生成；通过对不同环氧值ESBS开环反应，研究了不同离子基团质量摩尔浓度对离聚体物化性能的影响。     

对叔丁基苄胺的合成研究

摘要选择Delepine反应法的路线合成对叔丁基苄胺，并对反应投料比、反应温度及酸化后的反应时间进行了优化试验，得到了较好的反应条件：反应温度为40℃，对叔丁基苄氯与乌洛托品投料比为1：1；加入酸和醇后的保温时间为2h，从而使反应收率稳定在90％以上，含量达到95％。     

Production of agrochemical from waste polyesters

In this study, agrochemical was produced from waste polyesters. Reactions of waste polyesters [poly (ethylene terephthalate) (PET) and poly (butylene terephthalate) (PBT)] powder with ethylene glycol (EG) in the presence of tetrahydrofurane (THF) using 0.003 mol lead acetate as a catalyst were carried out in a batch reactor at 470 K and at atmospheric pressure conditions. Reactions were undertaken with various particle size ranges from 50 to 512.5 μm, and reaction time from 30 to 70 min for reactions of polyesters. Low molecular weight product of polyester was obtained during this process. In the next stage, hydroxylamine hydrochloride (HAHC), cyclohexylamine (CHA), and potasium hydroxide (KOH) solution were introduced to convert low molecular weight product of polyester into terephthalohydroxamic acid (TPHA) by introduction of HCl (Hydrochloric Acid) as per stoichiometric requirement. TPHA can be used as an agrochemical (insecticide) with appreciable efficiency. To increase the polyester conversion rate, external catalyst (0.003 mol lead acetate) was introduced during the reaction. The product was deposited on the surface of unreacted polyester, which was removed from the surface by introducing dimethyl sulfoxide (DMSO). To accelerate the reaction rate, DMSO, CHA, and THF were introduced during the reaction, which has an industrial significance. Depolymerization of polyester was proportional to the reaction time. Depolymerization of polyester was inversely proportional to the particle size of polyester. Analyses of value‐added product (TPHA) and byproducts [EG and BD (1,4‐butanediol)] as well as polyesters were undertaken. A kinetic model is developed, and experimental data simulated with it, which was consistent with the model. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2504–2510, 2006     

The kinetics of B‐a and P‐a type copolybenzoxazine via the ring opening process

The structure of benzoxazines is similar to that of phenolic resin through thermal self‐curing of the heterocyclic ring opening reaction that neither requires catalyst nor releases any condensation byproduct. These polybenzoxazine resins have several outstanding properties such as high thermal stability and high glass transition temperature. To better understand the curing kinetics of this copolybenzoxazine thermosetting resin, dynamic and isothermal differential scanning calorimetry measurements were performed. Three models, the Kissinger method, the Flynn–Wall–Osawa method, and the Kamal method, were used to describe the curing process. Dynamic kinetic activation energies based on Kissinger and Flynn–Wall–Osawa methods are 72.11 and 84.06 KJ/mol, respectively. The Kamal method based on an autocatalytic model results in a total order of reaction between 2.66 and 3.03, depending on curing temperature. Its activation energy and Arrhenius preexponential are 50.3 KJ/mol and 7959, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 730–737, 2005     

Nanobubble generation and its applications in froth flotation (part Ⅲ): specially designed laboratory scale column flotation of phosphate

Froth flotation is used widely for upgrading raw phosphate. The flotation recovery of coarse phosphate (-1.18+0.425 mm) is much lower than that achieved on the -0.425+0.15 mm size fraction. Enhanced recovery of coarse phosphate particles is of great economic and environmental importance for phosphate industry. In this investigation, four different phosphate samples were aquired, characterized and tested in a specially designed laboratory-scale flotation column. Significant recovery improvement of coarse phosphate flotation was achieved using cavitation-generated nanobubble though its effects differ among the four testing phosphate samples. The laboratory-scale flotation column test results indicate that nanobubble increased P2O5 recovery by up to 10%-30% for a given Acid Insoluble (A.I.) rejection, depending on the characteristic of phosphate samples. The improvement ef-fect of nanobubble on the hard-to-float particles was more significant than that on easy-to-float particles, especially at lower col-lector dosages. Nanobubbles reduced the collector dosage by 1/3 to 1/2. Nanobubbles almost doubled the coarse phosphate flotation rate constant and increased the flotation selectivity index by up to 25%.     

Solid state interfacial reactions in electrodeposited Ni/Sn couples

Ni/Sn couples,prepared by sequentially electroplating Ni layers and Sn layers on metallized Si wafers,were employed to study the mierostructures and growth kinetics of Ni-Sn intermediate phases,when the Ni/Sn couples were aged at room temperature or annealed at temperatures from 150 to 225℃for various times.The results show that the NiSn phase and Ni_3Sn_4 phase are formed,respectively,in the aged couples and annealed couples.The Ni_3Sn_4 layer is continuously distributed between the Ni and Sn sides in t...