Modelling of plastic flow, heat transfer and microstructural evolution during rolling of eutectoid steel rods

A study was undertaken in an attempt to quantitatively describe the rolling process of eutectoid steel rods. Finite element method was employed to model plastic flow and heat transfer in the deformed material, and heat transfer during cooling to ambient temperature. The numerical calculation gave an assessment of the strain, strain rate and temperature distributions in the work piece. This allowed the prediction of the austenite microstructure evolution during the process. Finally, the relationships describing the microstructure-mechanical properties were used to quantitatively characterize the influence of processing parameters on strength of rods after rolling.     

Roll force,torque, lever arm coefficient,and strain distribution in edge rolling

Due to the growing importance of width control in strip and plate mills, edge rolling is currently an im-portant process in hot rolling mills. Research in edge rolling has been carried out, and in the present ar-ticle, models for roll force, torque, and lever arm coefficient are derived using the upper bound method. A simple, kinematically admissible deformation zone and velocity field, independent of friction in the roll gap, is proposed, and the energy dissipation rate is derived. The formula for energy dissipation rate has, in practice, no limitation because all edge rolling geometries are safely in the area where the formula is valid. Roll force and torque are derived by means of two independent integrals. Thus, the lever arm coef-ficient is evaluated from the expressions for roll force and torque using conventional rolling theory. Roll-ing trials report good agreement with theory. Measured roll forces are similar to calculated forces. Furthermore, the shape of the dogbone that arises during edge rolling is in fairly good agreement with the calculated dogbone shape. Deviations are due to the deviation from ideally plastic material in the ex-periments. Also, the strain distribution over the dogbone is similar to the proposed deformation zone. Thus, a new formula has been developed to a stage that it can be implemented in width control systems for edge rolling stands in hot strip and plate mills.     

楔横轧轧齐基本理论研究

分析了台介成形过程中模具及金属变形的特点。发现产生螺旋状台阶的原因及其存在区间。从理论上阐明了设计楔横轧模具过渡段应遵循的准则。对比分析了多种满足过渡段设计准则的方案，指出最佳过渡方案为截止轧齐法，并给出了求解轧齐曲线方程的三种体积平衡原理及相应公式。最后应用微体积平衡原理求解了斜台阶轧齐曲线方程。     

重钢高线轧机生产工艺设计

在原有国产高线轧机基础上,经改进,如采用新型闭口式轧机,超高速机架,顶交无扭精轧机组等。为重钢高线车间进行了设计,终轧保证速度达到８０ｍ／ｓ,使我国高线轧机国产化达到了新阶段。     

镁合金材料的应用及其加工技术的发展(1)

第一部分较全面地介绍镁及镁合金材料在交通运输、航空航天、电子工业、核能工业、化工、冶金等部门的应用方向与实例。第二部分简要地论述镁合金材料的加工技术，重点介绍镁合金新材料的研发、熔炼铸造工艺、压铸成型工艺、挤压技术、锻压技术与轧制技术的进展。指出镁合金是一种很有发展前景的新型金属材料，其加工技术将获得进一步的快速发展。     

PHYSICAL SIMULATION OF INTERFACIAL CONDITIONS IN HOT FORMING OF STEELS

1.~nonNUInericalmodellingbythefiniteelement(FE)methodhasbecomeaneffectiveandeconomyicmeansforsimulatingmetalfoeingprocesses.However,accuratemodellingdemandsthecorrectdefinitionandinputsofthedataforthethermalandphysicalpIDPertiesoftheworkpieceandtoolmaterials,theboUndaryconditionsattheworkpiece--toolinterfaceandinotherareas,inadditiontoappropriatemeshgenerationandnumericalsolutions.Althoughmostofthematerialdataareavailable,thedataforinterfacialheattransferandfrictionconditions,Whichhavesubst…     

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Mg-Li ALLOY WITH Ca ADDITION

Mg-9wt%Li-2wt%Zn alloy was prepared and studied in this article. The addition of Ca to the alloy from 0.1wt% to 1wt% can refine the α-Mg and the best effect of refinement occurs when Ca content is 0.4wt%-0.5wt%. The billets can be rolled to thin sheets at room temperature, from which it is obvious that the addition of Ca improves alloys ormalin. while it decreases with the excess addition of Ca. The results also show that the ultimate tensile strength （UTS） and yield strength （YS） of the alloy with lwt% Ca may rise by 28% and 25%, respectively, however, the elongation decreases. It is clarified that the adsorption of proper Ca on the grain boundaries refines α-Mg and improves the tensile properties, but the presence of excess Ca and stable Ca2Mg6Zn3phase worsens the elongation.     

普碳钢超大总压下量可逆冷轧工艺技术及生产实践

针对目前我国部分钢企由于现有工艺装备投产较早、技术落后、机组能力不足，只能采取中间退火+二轧程工艺生产0.12～0.15 mm薄规格冷轧产品，生产成本增加、周转周期长，不能灵活应对复杂多变的冷轧市场需求的状况，开发了普碳钢单轧程可以实现95%以上超大总压下量的单机架六辊可逆冷轧机组。结合国内新投产的某1 150 mm单机架六辊可逆冷轧机组的稳定规模化生产实践，阐述了机组工艺设备选型、主要工艺技术参数配置和生产需解决的核心关键技术难点，同时列举了几种市场需求量大、附加值高的薄规格冷轧产品的现场实际生产工艺参数，以说明该机组的实际应用效果。     

金属薄膜结合性能的评价方法研究

针对Al2O3基体上磁控溅射沉积的Au／NiCr／Ta多层金属薄膜，用压痕法、滚动接触疲劳法、摩擦力和声发射两种模式同时监测的划痕法，对比研究了金属薄膜与基体的结合性能。结果表明：压痕试验从压痕形貌上很难判断薄膜与基体是否发生剥离，压入过程中也没有诱发裂纹的产生，更无法分辨薄膜层间的分离；由于金属薄膜的塑性变形，滚动接触疲劳法很难应用于金属薄膜结合性能的表征：划痕法可应用于多层金属薄膜的特异划擦行为研究，其中摩擦力模式能反映压头进入不同金属膜层时的变化，层间声发射信号的灵敏度不如摩擦力信号，对应试验条件，摩擦力曲线存在若干以拐点为特征的载荷，摩擦力曲线上出现的拐点及拐点特征载荷值可以在一定程度上反映多层膜的层数和层厚，并可刻划出该膜／基体系承受压入载荷而不发生剥落的能力。     

全球铝轧制工业概览系列综述之二十二日本与韩国的铝箔工业

对日本与韩国的铝箔工业作了全面介绍，扼要地介绍了两国的铝箔生产能力、企业名称、装备、产量、进出口量等。除中国外，日本与韩国是亚洲最大的铝箔生产国与消费国。日本2001年的产量为134．251h，2000年的产量为153．820kt，2002年预计产量约130．00kt；日本生产铝箔的公司有7家，10个工厂，其中最大的东洋铝业公司，生产能力35kt／a；日本是铝箔净输出国，2001年出口轧制箔54．473kt，其中对中国的出口为15．369kt。韩国有7个铝箔公司，总生产能力120kt／a，最大的是洛特铝业公司，生产能力40kt／a；也是一个铝箔净出口国，2000年的净出口量38．022kt。