Voidage characteristics and prediction of bed expansion in liquid-solid inverse fluidized bed

Studies on voidage fluctuations, axial voidage profile and bed expansion are carried out by measuring the local void fraction using particles of wide ranging characteristics in liquid-solid inverse fluidized bed. The quality of fluidization is elucidated by the local voidage fluctuations. The RMS voidage fluctuation depicts a maximum with respect to average bed void fraction and increases with increase in Archimedes number. The fluidization quality has been quantified using average normalized RMS voidage fluctuation in terms of Transition number. The axial void fraction is almost uniform throughout the bed except for particles with size distribution. All the literature and present experimental data on bed expansion are unified in terms of Richardson and Zaki equation using experimental terminal velocities. A new correlation is proposed for predicting the wall effect corrected experimental terminal velocities, as a substitute for standard drag equation. The bed expansion data are also predicted using the drift flux model.     

喷动床反应模型的研究进展

喷动床是一种可实现热量重复循环的高效反应器 .介绍了目前喷动床研究中出现的各种反应模型 ,从等温和非等温两个方面讨论了一维轴向、流管、半分割和流动反应耦合等各类模型的基本思想和理论及各自的特点 ,并提出了进一步发展的方向 .     

A SIMPLE METHOD FOR STUDYING THE KINETICS OF GAS-SOLID REACTIONS IN A FLUIDIZED BED REACTOR

A methodology for studying the kinetics of gas-solid reactions in a fluidized bed reactor is presented. This procedure is based on the analysis of the response of the system (flue gases) when batches of solids of different weight are added to the reactor. The method has been applied to the study of limestone particle calcination. The calcination rate constants obtained are in good agreement with those found in the literature. The method offers the advantage of simplicity and avoids the use of model assumptions or empirical correlations.     

A mathematical model of fluidized bed biomass gasification

A mathematical model of biomass gasification in a fluidized bed has been developed. It considers axial variations of concentrations and temperature in the bubble and emulsion phases. The mass balance involves instantaneous oxidation and equilibrium devolatilization of the biomass, kinetics of solid-gas gasification reactions as well as of gaseous phase reactions and interphase mass transfer and gas convection. The energy balance is solved locally for each vertical volume element, and globally on the reactor by iteration on the temperature at the bottom of the bed. Three parameters have been adjusted based on the experimental results: the heat transfer coefficient at the wall, the weighting of the kinetics of the water-gas shift reaction and the fraction of biomass carbon remaining as char after devolatilization. The model is used to simulate a pilot scale (50 kg/h) biomass gasifier, and its predictions compared to experimental measurements. The temperature and gaseous concentrations are estimated with good accuracy for the experiments using a wood feedstock, except for the concentration of hydrogen which is overestimated.     

射流流化床内流体力学行为的模拟研究

以流化床应用为代表的气固流动系统是许多化工过程中的重要组成部分 ,CFD( computational fluid dynamics)方法能够为其优化设计和放大提供所需要的信息 .本文采用双欧拉模型 ,与 Gidaspow等的实验结果进行了对比 ,模拟了二维射流流化床内气泡的形成规律 ,得到了带锥型分布器的流化床内瞬时空隙率和气固相速度分布等流体力学参数 .对锥型分布器流化床的实验结果表明 ,模拟得到的气泡的形状与实验现象相接近 .     

Circulating fluidized bed combustion of a high-sulphur eastern canadian coal

Combustion tests were carried out with Minto coal in combination with three different limestones in the University of British Columbia (UBC) pilot scale (152 mm square x 7.3 m tall) circulating fluidized bed combustion (CFBC) unit. Operating conditions were chosen to be typical of those employed in large-scale CFBC power boilers. Recycling of fine particles captured by the secondary cyclone was found to be of considerable importance in increasing sulphur capture, enhancing combustion efficiency and reducing the amount of calcium sulphide in the solids residues. NO_x emissions increased as the Ca:S ratio increased. Local gas concentrations inside the reactor were strongly influenced by the core-annulus solids distribution patterns which characterize circulating fluidized beds.     

The influence of geometrical factors and feedstock on gasification in a high temperature fluidised bed

Results are presented for gasification of coal and char by means of air or air-steam mixtures in fluidised bed reactors of three different volumes. Two sizes of coal feedstock particles, 0.5-1.0 mm and 1.0-1.5 mm, and one size of char particles, 0.5-1.5 mm, were used. The calorific value of generated gas and the carbon conversion are presented as a function of particle residence time. For coal gasification higher carbon conversion has been obtained at the same particle residence time than for char gasification. For the steam gasification, a lower gas heating value of about 4 MJ/m³ (S.T.P.) was obtained.     

Combustion of single char particles in a turbulent fluidized bed

The combustion of single bituminous char particles (4-12 mm diameter) was studied in a turbulent fluidized bed operated at 1098 K using air as the fluidising medium. Results indicated that particles burn with constant density following a shrinking sphere model. Burning rates are much higher than those observed in a bubbling fluidized bed. The rate of transfer of oxygen to the particle surface is also higher than that observed in bubbling beds. A model is proposed to calculate the Sherwood numbers of the burning carbon particles. Experimental values of the Sherwood numbers agree well with those predicted from the model.     

GRAPHICAL SOLUTION OF MULTISTAGE FLUIDIZED BED HEAT EXCHANGER

The design of multistage fluidized beds for heat exchange necessitates the solution of the mass and energy balance equations combined with the equilibrium relations for each stage. This paper presents a novel way of applying well known methodology to a different technology, one where it has not been widely applied.

In the present work a McCabe-Thiele type of graphical approach is presented for both counter-current and cross-current contacting multiple fluidized beds. The necessary equations for a multistage calciner are developed and the application of the proposed method is demonstrated. Generalized fluidized bed efficiency for counter-current and cross-current multiple fluidized bed is presented.     

基于KPCA和SVM的火箭发动机试验台故障诊断方法

为了解决液体火箭发动机试验台的故障诊断问题,提出了一种基于核主元分析(KPCA)特征提取和支持向量多分类机(SVM)的故障诊断方法,该方法首先利用核主元分析对试验台标准故障样本进行特征提取,通过特征分析,建立适合于试验台故障状态识别的层次多分类支持向量机,并对其进行训练,然后将试验数据在主元上投影,输入到训练好的支持向量多分类器,对试验台故障状态进行识别.该方法充分利用了核主元分析强大的非线性特征提取能力和支持向量分类机良好的小样本泛化特性,解决了试验台故障诊断中的小样本、非线性模式识别问题.对试验台的试验结果表明,该方法是有效的、可行的.