岩盐溶解速率的研究

在岩盐溶解速率及其影响因素的实验研究基础上,建立了岩盐溶解速率的计算公式。研究的结果可为岩盐开采和其他水溶法矿物开采提供参考。     

中国铬盐生产现状与发展建议

较全面地回顾了中国铬盐生产历史和现状，系统总结了铬盐行业发展过程中的经验教训，提出了中国铬盐生产发展的建议，即中国铬盐工业在大型化的同时，应推广采用新工艺、新技术；应开发新品种，进行深加工；应密切注意最新技术动向，并及时跟进。     

芘四硫酸四钠盐／甲基紫精复合物光物理性质的研究

本文通过吸收光谱滴定和时间分辨瞬态吸收光谱对芘四硫酸四钠盐（ｐｙｒｅｎｅｔｅｔｒａｓｕｌｆｏｎｉｃａｃｉｄｔｅｔｒａｓｏｄｉｕｍｓａｌｔ，ＰｙＴＳ）／甲基紫精（ｍｅｔｈｙｌｖｉｏｌｏｇｅｎ，ＭＶ２＋）复合物在水溶液中的光物理性质进行研究．用甲基紫精滴定芘四硫酸四钠盐时，得到该复合物的组成成份是１∶１，反之，用芘四硫酸四钠盐滴定甲基紫精时，同样得到１∶１组成成份的复合物．该复合物的形成常数是２．４×１０６ｍｏｌ－１·Ｌ，当用光激发该复合物时，发现其中存在芘四硫酸四钠盐到甲基紫精的电子转移过程，并得到该过程的动力学模型．     

Polyimide foams with ultralow dielectric constants

To explore ultralow dielectric constant polyimide, the crosslinked polyimide foams (PIFs) were prepared from 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA), 4,4′‐oxydianiline (ODA), and 2,4,6‐triaminopyrimidine (TAP) via a poly(ester–amine salt) (PEAS) process. FTIR measurements indicated that TAP did not yield a negative effect on imidization of PEAS precursors. SEM measurement revealed the homogeneous cell structure. Through using TAP as a crosslinking monomer, the mechanical properties of PIFs could be improved in comparison with uncrosslinked BTDA/ODA based PIF. The crosslinked PIFs still exhibited excellent thermal stability with 5% weight loss temperatures higher than 520°C. In the field with frequency higher than 100 Hz, the dielectric constants of the obtained PIFs ranged from 1.77 to 2.4, and the dielectric losses were smaller than 3 × 10^?2 at 25–150°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1734–1740, 2006     

Novel method for preparation of quaternary ammonium ionomer from epoxidized styrene–butadiene–styrene triblock copolymer and its use as compatibilizer for blending of styrene–butadiene–styrene and chlorosulfonated polyethylene

A novel method for the preparation of a quaternary ammonium ionomer of styrene–butadiene–styrene triblock copolymer (SBS) was developed by a ring‐opening reaction of epoxidized SBS with triethylamine hydrochloride in the presence of a phase transfer catalyst. The optimum conditions were studied. The ionomer was characterized by quantitative analysis, IR spectroscopy, and ¹H‐NMR spectroscopy. Its water absorbency, oil absorbency, dilute solution viscosity, and use as a compatibilizer for the blending of SBS and chlorosulfonated polyethylene (CSPE) were investigated. The results showed that, under optimum conditions, the epoxy groups can be completely converted to the quaternary ammonium groups. The IR spectrum did not exhibit the absorption peak for quaternary ammonium groups, whereas the ¹H‐NMR spectrum and titration method demonstrated it. With increasing ionic group content, the water absorbency of the ionomer increased whereas its oil absorbency decreased. These indicated the amphiphilic character of the SBS ionomer. The dilute solution viscosity of the ionomer in toluene/methanol (9/1) solvent increased with increasing quaternary ammonium group content. The ionomer was used as a compatibilizer for the blends of SBS and CSPE. The addition of a small amount of the ionomer to the blend enhanced the mechanical properties of the blends: 2 wt % ionomer based on the blend increased the tensile strength and ultimate elongation of the blend nearly 2 times. The blends of equal parts SBS and CSPE behaved as oil‐resistant thermoplastic elastomers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1975–1980, 2006     

十二烷基苯磺酸钠水溶液聚集性质的研究

用滴体积法测出十二烷基苯磺酸钠（ＳＤＢＳ）稀水溶液的表面张力；然后求出其临界胶束浓度（ＣＭＣ）。同时通过溶液的电导率、吸收光谱以及荧光光谱测定求出其ＣＭＣ。这样测出的ＣＭＣ值为１．２～１．６×１０－３ｍｏｌ／Ｌ，与文献值相符。也研究了部分水解的聚丙烯酰胺（ＰＨＰＡＭ）对ＳＤＢＳ聚集性质的影响；发现ＳＤＢＳ的ＣＭＣ值随ＰＨＰＡＭ的加人而减少并且ＰＨＰＡＭ水溶液的粘度随ＳＤＢＳ的存在而急剧降低（类似盐效应）。这些方法与性质对强化采油（ＥＯＲ）是重要的。     

烧碱蒸发装置的改进

通过改进工艺流程，科学确定加热面积的配比，合理选择采盐泵等技术改进措施，提高了生产强度，满足了高气压的生产条件，延长了洗效周期，减少了设备的腐蚀，提高了成品碱的质量，满足了生产联二脲的要求并降低了汽耗和电耗，年可节约ll0万元。     

改进化盐工艺降低酸碱消耗

介绍了采取不同配水工艺后酸碱消耗的比较情况，提出选择碱性配水化盐工艺可以降低酸碱消耗的建议。     

Electrodeposition Behaviour of Cadmium Telluride from 1-ethyl-3-methylimidazolium Chloride Tetrafluoroborate Ionic Liquid

Voltammetry at a glassy carbon electrode was used to study the electrochemical deposition of Cd–Te from the Lewis basic 1-ethyl-3-methylimidazolium chloride/tetrafluoroborate air-stable room temperature ionic liquid between 80 °C and 140 °C. Deposition of tellurium alone occurs through a four-electron reduction of Te(iv) to Te which could be further reduced to Te(-ii) at a more negative potential. The Cd–Te electrodeposits could be obtained by the underpotential deposition (UPD) of Cd on the deposited Te. The UPD of Cd on Te was, however, limited by a slow charge transfer rate. Samples of Cd–Te electrodeposits were prepared on tungsten and titanium substrates and characterized by energy dispersive spectroscope (EDS), scanning electron microscope (SEM), and X-ray powder diffraction (XRD). The results showed that an excess amount of Cd(ii) was required in order to prepare CdTe codeposits with a Cd/Te atomic ratio approached 1/1. The deposit composition was independent of the deposition potential within the Cd UPD range. Raising the deposition temperature increased the UPD rate of Cd and promoted the formation polycrystalline CdTe.     

Structure and properties of nitrile rubber (NBR)–clay nanocomposites by co‐coagulating NBR latex and clay aqueous suspension

Nitrile rubber (NBR)–clay nanocomposites were prepared by co‐coagulating the NBR latex and clay aqueous suspension. Transmission electron microscopy showed that the silicate layers of clay were dispersed in the NBR matrix at the nano level and had a planar orientation. X‐ray diffraction indicated that there were some nonexfoliated silicate layers in the NBR–clay nanocomposites. Stress–strain curves showed that the silicate layers generated evident reinforcement, modulus, and tensile strength of the NBR–clay nanocomposites, which were significantly improved with an increase in the amount of clay, and strain‐at‐break was higher than that of the gum NBR vulcanizate when the amount of clay was more than 5 phr. The NBR–clay nanocomposites exhibited an excellent gas barrier property; the reduction in gas permeability in the NBR–clay nanocomposites can be described by Nielsen's model. Compared with gum NBR vulcanizate, the oxygen index of the NBR–clay nanocomposites increased slightly. The feasibility of controlling rubber flammability via the nanocomposite approach needs to be evaluated further. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3855–3858, 2003