Experimental Study of Microstructure Evolution during Tempering of Quenched Steel and Its Application

LARGE-SIZED FORGINGS are usually intensivelyquenched to obtain the desired microstructuredistribution,high strength and hardness.Becauseresidual stresses are high in quenched large-sizedforgings,tempering processes follow quenchingprocesses to reduce the residual stress and obtain goodmechanical properties.Several differentmicrostructures are generated in quenched steelforgings,such as martensite,bainite and retainedaustenite.Modeling of microstructure evolution inquenched steel during …     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

Development and spatial organization of the air conduits in the lung of the domestic fowl, Gallus gallus variant domesticus

We employed macroscopic and ultrastructural techniques as well as intratracheal casting methods to investigate the pattern of development, categories, and arrangement of the air conduits in the chicken lung. The secondary bronchi included four medioventral (MVSB), 7-10 laterodorsal (LDSB), 1-3 lateroventral (LVSB), several sacobronchi, and 20-60 posterior secondary bronchi (POSB). The latter category has not been described before and is best discerned from the internal aspect of the mesobronchus. The secondary bronchi emerged directly from the mesobronchus, except for the sacobronchi, which sprouted from the air sacs. Parabronchi from the first MVSB coursed craniodorsally and inosculated their cognates from the first two LDSB. The parabronchi from the rest of the LDSB curved dorsomedially to join those from the rest of the MVSB at the dorsal border. Sprouting, migration, and anastomoses of the paleopulmonic parabronchi resulted in two groups of these air conduits; a cranial group oriented rostrocaudally and a dorsal group oriented dorsoventrally. The neopulmonic parabronchial network formed through profuse branching and anastomoses and occupied the ventrocaudal quarter of the lung. There were no differences in the number of secondary bronchi between the left and right lungs. Notably, a combination of several visualization techniques is requisite to adequately identify and enumerate all the categories of secondary bronchi present. The 3D arrangement of the air conduits ensures a sophisticated system, suitable for efficient gas exchange. Microsc. Res. Tech., 2008. (c) 2008 Wiley-Liss, Inc.     

碱性蓄电池隔膜用非织造布探析

介绍了碱性蓄电池隔膜用非织造布在电池生产中的作用和要求,对碱性蓄电池隔膜用非织造布的纤维原料、生产方法进行了比较分析。     

HALT技术在变频器中的应用初探

HALT技术可在产品设计阶段快速消除设计缺陷,缩短研发时间和成本,迅速提高产品的质量和固有可靠性。本文从HALT试验的背景出发,介绍了HALT试验的基本原理和意义。在对HALT箱各方面性能验证的基础上,针对我司11kW变频器,详细讲述了HALT试验的具体操作过程。     

双曲线冷却塔风筒几何缺陷分析

由于施工放样原因,双曲线冷却塔风筒发生移位变形,筒壁出现初始几何缺陷,偏差超出规范允许值,造成冷却塔应力状态改变.利用冷却塔专用计算软件对冷却塔结构进行静力计算,根据计算的内力对强度进行验算,分析初始几何缺陷对冷却塔应力状态的影响,评价冷却塔结构安全性及是否需要进行加固处理,并对冷却塔后期维护提出建议.     

Physiological responses to simulated firefighter exercise protocols in varying environments

For decades, research to quantify the effects of firefighting activities and personal protective equipment on physiology and biomechanics has been conducted in a variety of testing environments. It is unknown if these different environments provide similar information and comparable responses. A novel Firefighting Activities Station, which simulates four common fireground tasks, is presented for use with an environmental chamber in a controlled laboratory setting. Nineteen firefighters completed three different exercise protocols following common research practices. Simulated firefighting activities conducted in an environmental chamber or live-fire structures elicited similar physiological responses (max heart rate: 190.1 vs 188.0 bpm, core temperature response: 0.047°C/min vs 0.043°C/min) and accelerometry counts. However, the response to a treadmill protocol commonly used in laboratory settings resulted in significantly lower heart rate (178.4 vs 188.0 bpm), core temperature response (0.037°C/min vs 0.043°C/min) and physical activity counts compared with firefighting activities in the burn building.

Practitioner Summary: We introduce a new approach for simulating realistic firefighting activities in a controlled laboratory environment for ergonomics assessment of fire service equipment and personnel. Physiological responses to this proposed protocol more closely replicate those from live-fire activities than a traditional treadmill protocol and are simple to replicate and standardise.     

Deformation effect of lateral roof roadway in close coal seams after repeated mining

This paper analyzed the deformation mechanism in lateral roof roadway of the Ding Wu-3 roadway which was disturbed by repeated mining of close coal seams Wu-8 and Wu-10 in Pingdingshan No. 1 Mine. To determine the strata disturbance scope, the strata displacement angle was used to calculate the protection pillar width. A numerical model was built considering the field geological conditions. In simulation, the mining stress borderline was defined as the contour where the induced stress is 1.5 times of the original stress. Simulation results show the mining stress borderline of the lateral roadway extended 91.7 m outward after repeated mining. Then the original stress increased, deforming the roadway of interest. This deformation agreed with the in situ observations. Moreover, the strata displacement angle changed due to repeated mining. Therefore, reselection of the displacement angle was required to design the protective pillar width. Since a constant strata displacement angle was used in traditional design, the proposed method was beneficial in field cases.     

循环应力加载条件下支撑剂破碎率实验研究

运用微机控制电液伺服万能试验机,对循环应力加载条件下支撑剂破碎率进行实验研究,考察不同支撑剂及不同应力加载次数下支撑剂的破碎率情况。实验结果表明：循环应力加载对支撑剂的破碎率影响很大。随着应力循环加载次数的增加,破碎率上升明显,且破碎率开始上升较快,随着循环次数的增加而上升缓慢。