湿H2S环境中金属材料腐蚀的研究

介绍了在湿H2S环境中金属材料的腐蚀试验标准、方法和手段并重点强调了在H2S试验过程中常遇到的一些问题的处理方法.最后,指出了应加强H2S腐蚀的基础性和系统性研究的研究方向.     

用屏蔽暂堵技术封堵水平井裂缝性漏层

克拉玛依油田HW702水平井的大斜度段和水平段,将穿越纵向裂缝发育的二叠系佳木河组储层。为安全钻进和保护油层,用超细碳酸钙和磺化沥青复配后加入复合离子钻井液中成屏蔽暂堵的堵漏钻井液。室内用岩心试验,屏蔽暂堵后渗透率可降为0,暂堵深度小于3cm,可用酸化和射孔解堵。现场使用效果也很好,使HW702水平井顺利完钻,并获得工业油气流。     

对未来我国覆铜板业技术发展的战略与任务的探讨

对未来十年我国覆铜板业技术发展的战略与技术开发重点任务进行了探讨。     

Design and application of functional absorbers

This paper gives an overview of the research at Institute of Acoustics, Tongji University, on functional absorbers and experience acquired in practical applications over the past three decades. Experiments and analysis of the absorption characteristics of three different geometrical forms of functional absorbers, i.e., panels, cubes and tubes, were conducted with different arrangements. The resulting esthetical effects are illustrated with pictures. Several non-fiber materials are used to compose functional absorbers with advantages both in acoustic properties and in architectural features. Cost effectiveness analysis is also given in order to provide design guidelines.     

T-stress in orthotropic functionally graded materials: Lekhnitskii and Stroh formalisms

A new interaction integral formulation is developed for evaluating the elastic T-stress for mixed-mode crack problems with arbitrarily oriented straight or curved cracks in orthotropic nonhomogeneous materials. The development includes both the Lekhnitskii and Stroh formalisms. The former is physical and relatively simple, and the latter is mathematically elegant. The gradation of orthotropic material properties is integrated into the element stiffness matrix using a “generalized isoparametric formulation” and (special) graded elements. The specific types of material gradation considered include exponential and hyperbolic-tangent functions, but micromechanics models can also be considered within the scope of the present formulation. This paper investigates several fracture problems to validate the proposed method and also provides numerical solutions, which can be used as benchmark results (e.g. investigation of fracture specimens). The accuracy of results is verified by comparison with analytical solutions.     

砌筑砂浆达不到设计要求的事故原因分析

从砂浆的配合比、和易性、原材料等对砌筑砂浆达不到设计要求的事故原因进行了分析。     

氯碱生产中的腐蚀与防护

介绍了氯碱装置中介质的腐蚀特性、常用材料的耐腐蚀特性及应用实例。     

PLC在原料系统的应用

阐述了硅铁生产中焦碳生产输送系统的工作原理和工艺要求，介绍了PLC在原料输送系统中的应用，给出了PLC的I／O接线图及程序框图，提出了工业原料生产输送控制系统的设计特点。     

用介孔材料制备定向碳纳米管的研究进展

综述了近年来采用介孔材料制备定向碳纳米管的研究进展,包括介孔材料的合成及介孔材料在制备定向碳纳米管方面的应用。重点介绍了采用合成介孔材料的模板剂石墨化及介孔材料作为载体制备定向碳纳米管的方法,探讨了模板剂种类、催化剂的制备方法及反应温度和时间对定向碳纳米管生长的影响和定向碳纳米管生长的介孔限制机理,并提出了这一领域的研究方向。     

Stress analysis of pin-loaded woven-glass fiber reinforced epoxy laminate conveying chain components

The aim of this study is to examine the effects of various loading conditions on the stress of a pin-loaded woven-glass fiber reinforced epoxy laminate conveying chain component. A numerical and experimental study was carried out to determine the stress distribution of composite conveying chain components used to convey loads. For the experimental study, an apparatus was developed to simulate chain components in real motion. Two different working conditions of the chain component were investigated. The first condition represents the movement of the chain components without loading. In the second condition, the chain component touches and moves the load. The commercial finite element package ANSYS was used to perform the numerical analysis using a three dimensional eight-noded layered structural solid elements. Chain tensile forces were loaded through pins and chosen as 250, 500, 750, 1000 and 1250 N for the two conditions of chain components. Experimental and numerical studies were compared and discussed for two conditions and five different tensile forces. A good agreement between experimental results and numerical predictions is obtained.