α—Fe2O3气敏元件的可靠性环境试验

探讨了α－Ｆｅ２Ｏ３半导体气敏元件的可靠性环境试验方法，对该元件的可靠性环境试验结果进行了数据处理和统计分析；探讨了该元件的主要失效模式，运用不同的评定方法对元件的环境应力适应能力进行了定量估计。     

钼铁矿自动化计量机械系统改进设计与应用

针对原有大颗粒、高比重钼铁矿计量机械部分由于设计缺陷导致的各称重传感器受力不均衡、精度不高、称重偏差较大、自动化程度相对较低等问题,结合生产工艺条件,综合利用静态称重的低成本、高精度与动态称重的高效率优点,对称体结构进行优化设计。节约了成本,降低了操作人员的劳动强度,提高了生产效率,满足了生产需求。     

电子衡器在中铝广西分公司矿山生产中的应用

电子衡器目前在国内工业企业中得到了广泛使用,文章从其原理出发,结合电子衡器在中国铝业广西分公司矿山部实际运行状况,阐述了该称重设备的使用与维护要领。     

基于深度学习模型的无线传感器网络数据融合算法

为了在无线传感器网络中提高数据融合性能,基于深度学习模型,提出一种将层叠自动编码器(SAE)和分簇协议相结合的数据融合算法SAEMDA,该算法在各个簇内构建特征提取分类模型SAEM,通过SAEM对节点数据进行特征提取和分类,之后将同类特征融合并发送给汇聚节点。SAEM的训练既可以采用离线有监督学习也可以采用在线无监督学习。仿真实验表明:和BPFDA,SOFMDA算法相比,SAEMDA在网络能耗大致相当的情况下能将数据融合正确率提高最多7.5%。     

虚拟实验系统在“传感器与测试技术”课程中的应用

面向专业背景以力学、结构设计为主的飞行器设计与工程专业本科生,将“传感器与测试技术”课程内容与航空航天应用相结合,能够加深学生对传感器原理的理解、提高对测试技术的掌握,并促进理论和实践的联系。以飞行器结构无损检测的具体应用案例为基础,开展了结构虚拟检测实验平台的建立,探讨虚拟实验在“传感器与测试技术”课程中融入、运行和评测的方式,满足了学生动手操作实验的需求,实现了书本知识和应用的有机融合,促进了学生自主和探索式的学习。     

Study of amperometric diffusion solid-state electrolyte cell operating regimes

Different operating regimes are considered for operation of an amperometric diffusion solid-state electrolyte cell for measuring the volume fraction of oxygen. The design of an oxygen sensor is described. Experimental results confirm the efficiency of the proposed diffusion solid-state electrolyte cell for measuring oxygen in the range of 98–100%. Translated from Izmeritel’naya Tekhnika, No. 10, pp. 64–65, October, 2008.     

Torsion sensor based on two cascaded long period fiber gratings fabricated by CO2 laser pulse irradiation and HF etching technique respectively

A novel torsion sensor is proposed, which is composed of one long period fibre grating and one asymmetrically corrugated long period fibre grating based on the high-frequency CO₂ laser pulses technology and burning fibre coating and etching cladding technology, respectively. By combing the advantages of the two aforementioned elements, a sensitivity of 331.7 and 310.3 pm/(rad/m) towards clockwise and anticlockwise direction, respectively, is reached in the experiments.     

In-fiber liquid-level probe based on Michelson interferometer via dual-mode elliptical multilayer-core fiber

Abstract

An in-fiber liquid-level probe fabricated from homemade dual-mode elliptical multilayer-core fiber (EMCF) was proposed and experimentally demonstrated. The proposed sensor simply consists of a segment of the EMCF with one end coated with silver film, and a Michelson interferometer is roughly established when light from single-mode fiber incident from the other end. The detected interference patterns, rather clean due to the few-mode property, shift as the liquid level due to strong interaction between high-order modes and measurands through evanescent waves. Both the propagation characteristics and operation principle of such a sensor were demonstrated in detail, and sensitivities of 33.48, 43.35, and 48.93 pm/mm corresponding to liquid indices of 1.333, 1.353, and 1.373 were successfully achieved with a 50-mm EMCF probe, respectively. Moreover, the proposed sensor had the potential to discriminate measurand index after proper calibration.     

改性聚偏氟乙烯接枝苯乙烯/丙烯酸磺酸电解质膜及其在CO传感器中的应用

以过氧化苯甲酰(BPO)作引发剂,通过溶液接枝聚合法把苯乙烯/丙烯酸同时接枝到原硅酸钠改性的聚偏氟乙烯(PVDF)膜上,磺化后得到聚偏氟乙烯接枝苯乙烯/丙烯酸磺酸(PVDF-g-PS/ PASA)膜.FTIR分析表明:苯乙烯和丙烯酸接枝到PVDF膜上;环境的相对湿度在20%～80%范围内,对PVDF-g-PS/ PASA膜电导率的影响基本不变,并达到0.0198S·cm-1,40℃保水率达99%.将膜应用于CO传感器中,传感器电流响应信号与CO气体浓度具有较好的线性关系.     

基于BJT特性的数字温度传感器发展现状及趋势

随着工业物联网趋向数字化、智能化和集成化发展,控制系统需要感知的物理量规模和复杂度都迅速提升。其中数字温度传感器能直接将温度信息转换为数字信号,具有低成本、低功耗、面积小、数字输出等多种优点,可以实时监测系统温度数据,并与反馈机制协同进行反馈调节,目前已经得到广泛应用。在各类数字温度传感器中,基于CMOS工艺寄生三极管(BJT)感温的数字温度传感器在制造工艺上更容易实现,且具有高稳定性和高精度,是工业界产品首选方案。聚焦基于BJT特性实现感温的数字温度传感器,从学术研究成果、工业产品两方面总结其技术路线、发展现状和趋势,为后续温度传感器研究提供参考。