浸渍增重率和反渗率研究

对浸溃过程中浸渍剂沥青的浸入率和反渗率进行了分析与探讨。提出了理想增重率、理论增重率与实际增重率的概念和计算方法。并比较了实际增重率与操作增重率的差别。同时分析了抽真空的绝对压力与施压的绝对压力对各项增重率和反渗率的影响。     

感光化学中的近代研究方法

主要介绍了近 2 0年来电子显微技术、波谱技术、核磁共振技术、微波光导测试技术和离子电导测试技术等在卤化银晶体和潜影生成过程研究中的应用。     

锂离子电池正极材料的现状与发展

介绍了锂离子正极材料氧化钴锂、氧化镍锂、氧化锰锂、磷酸铁锂等研究开发和现状,对其特性进行了较为全面的总结。     

Ultrasonic spray pyrolysis of nano crystalline spinel LiMn2O4 showing good cycling performance in the 3 V range

Spherical lithium manganese oxide spinel was synthesized by an ultrasonic spray pyrolysis method, and has been characterized using X-ray diffraction, scanning electron microscopy, transimission electron microscopy and electrochemical cycling at 3 V regions. The LiMn₂O₄ powders were composed of about 10 nm-sized primary particles. The delivered discharge capacity of the synthesized nano-material was 125 mAh g⁻¹ between 2.4 and 3.5 V and its retention was about 96% upon 50 cycling. From the high resolution transmission electron microscopic study, it was found that structural transition of the parent material did not occur even after the 50th electrochemical cycling on the 3 V region. It seems that the reversible structural change is possible for nanocrystalline LiMn₂O₄ as observed by the X-ray diffraction and transition electron microscopic observations.     

基于区域权函数理论的多电极电磁流量计电极设计

基于Shercliff权函数提出区域权函数概念,设计多电极电磁流量计,通过测量管道截面不同位置的弦端电压,计算各区域的轴向平均速度,实现速度分布与体积流量的测量。着重研究了流量计电极设计,选取不锈钢平头方案的多电极电磁流量计,对于阀门下游的非轴对称单相流体积流量测量精度高于±1.0%,倾斜管固—液两相流实验证明:该设计对于两相流非轴对称的速度分布测量具备可靠性。     

乙二醇合成的研究进展

介绍了环氧乙烷、乙二醇技术的进展，总结了国内外合成乙二技术研究、开发的最新成果：合成气直接合成法、甲醛电化学加氢二聚法、甲醇醚氧化偶联法、多元醇加氢裂解法等。     

阵列式多针-柱电极装置实现离子风的实验与分析

为了实现一定气体流速的离子风,设计了一种新型的阵列式三排3 ×3垂直放置的针-柱电极结构放电装置.在针-柱之间间距为3mm、排与排之间间距为8 mm、镇流电阻12 MΩ、放电电阻12 MΩ、测试电阻1 kΩ、大气压环境、室温、无外部通入气流时,阵列式针-柱电极实现了稳定的电晕放电,并通过示波器记录的放电波形、数码相机拍摄的发光图像以及放电伏安特性曲线进行了验证.同时,随着阵列式排数的增加,放电电流变大,离子风风速也随之增大.该针-柱结构易于用MEMS工艺加工制作,可应用于便携式分析仪器中.     

Study of mass transfer in a vertically moving particle bed electrode

A study was made of the influence of process parameters on the mass-transfer coefficient in a flow-through cell with a cascade of rotating drums partially filled with conductive particles (called the vertically moving particle bed). Copper deposition from an acidic sodium sulphate solution was used as the model reaction. To evaluate the experimental data a macrohomogeneous mathematical model of potential and current density distribution inside the cell was developed. The electrolyte flow distribution between the empty space above the particle bed and through the bed was evaluated. On the basis of these results the following correlation is proposed:

Exploring single electrode reactions in polymer electrolyte fuel cells

Utilising a pseudo-reference electrode in polymer electrolyte fuel cells allows for the separation of anodic and cathodic contributions to the entire cell impedance. Modelling the impedance responses by using equivalent circuits inhibits the investigation of kinetic parameters of the basic electrochemical reactions, which take place at single electrode-electrolyte interfaces. Therefore, we evaluate single electrode impedance measurements by a kinetic model, which is based on specific reaction pathways, either for the oxygen reduction reaction (ORR) or the hydrogen oxidation reaction (HOR). As a consequence, it is possible to obtain kinetic parameters for the specific reaction of interest. Furthermore, the information gained from the single electrode impedance measurements and the kinetic model can give insight into single reactions steps. In particular, the ORR has to include a chemical step in the reaction pathway.     

Preparation of NaBiO3 and the electrochemical characteristic of manganese dioxide doped with NaBiO3

NaBiO₃ crystal of high purity has been synthesized through chemical oxidization. The morphology and thermal stability of NaBiO₃ were examined with scanning electron microscope (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The electrochemical properties of MnO₂ electrodes with and without doping NaBiO₃ were studied through galvanostatic charge/discharge and cyclic voltammetry. The results indicate that the MnO₂ electrode doped with NaBiO₃ possesses remarkably higher discharge voltage and capacity and better reversibility than the pure MnO₂ electrode and Bi₂O₃ doping MnO₂ electrode.