石墨烯/银纳米颗粒复合材料的制备及其对双氧水的电化学检测

以氧化石墨烯(GO)和硝酸银为原材料,聚乙烯吡咯烷酮(PVP)为还原剂和稳定剂,通过水热法制备出还原氧化石墨烯/银纳米颗粒(rGO/AgNPs)复合材料。采用透射电子显微镜(TEM)、X射线衍射(XRD)及紫外-可见分光光度计(UV-Vis)对rGO/AgNPs复合材料的形貌、组成和结构进行表征。同时,将rGO/AgNPs复合材料修饰到玻碳电极表面制备出过氧化氢(H_2O_2)电化学传感器,通过循环伏安法(CV)和计时安培响应法(i-t)对传感器进行电化学性能测试。实验结果表明:制备的rGO/AgNPs传感器具有较好的电化学性能,其对H_2O_2检测的灵敏度为340.6μA·(mmol/L)~(-1)·cm~(-2),响应时间为3s,最低检测极限为7.5μmol/L(S/N=3),线性检测范围为20~4950μmol/L(线性相关系数为R=0.9973)。     

纳米银/聚合物复合材料的原位法制备技术综述

纳米银/聚合物复合材料结合了纳米银优异的物理化学性能和聚合物的易加工和成膜性的特点,被广泛应用于抗菌、催化和光电等领域。原位法具有工艺简单、成本低、可形成单分散的纳米粒子等优点,被广泛用于制备纳米银/聚合物复合材料。主要综述了纳米银/聚合物复合材料的原位制备方法,主要包括原位生成法、原位聚合法、双原位合成法,并提出了纳米银/聚合物复合材料的发展方向。     

Facile synthesis of CsPbBr3/PbSe composite clusters

In this work, CsPbBr₃ and PbSe nanocomposites were synthesized to protect perovskite material from self-enlargement during reaction. UV absorption and photoluminescence (PL) spectra indicate that the addition of Se into CsPbBr₃ quantum dots modified the electronic structure of CsPbBr₃, increasing the band gap from 2.38 to 2.48 eV as the Cs:Se ratio increased to 1:3. Thus, the emission color of CsPbBr₃ perovskite quantum dots was modified from green to blue by increasing the Se ratio in composites. According to X-ray diffraction patterns, the structure of CsPbBr₃ quantum dots changed from cubic to orthorhombic due to the introduction of PbSe at the surface. Transmission electron microscopy and X-ray photoemission spectroscopy confirmed that the atomic distribution in CsPbBr₃/PbSe composite clusters is uniform and the composite materials were well formed. The PL intensity of a CsPbBr₃/PbSe sample with a 1:1 Cs:Se ratio maintained 50% of its initial intensity after keeping the sample for 81 h in air, while the PL intensity of CsPbBr₃ reduced to 20% of its initial intensity. Therefore, it is considered that low amounts of Se could improve the stability of CsPbBr₃ quantum dots.     

Distinguishable Detection of Ultraviolet,Visible, and Infrared Spectrum with High‐Responsivity Perovskite‐Based Flexible Photosensors

Distinguishable detection of the ultraviolet, visible, and infrared spectrum is promising and significant for the super visual system of artificial intelligences. However, it is challenging to provide a photosensor with such broad spectral response ability. In this work, the ultraviolet, visible, and infrared spectrum is distinguished by developing serial photosensors based on perovskite/carbon nanotube hybrids. Oraganolead halide perovskites (CH₃NH₃PbX₃) possess remarkable optoelectronic properties and tunable optical band gaps by changing the halogens, and integration with single‐walled carbon nanotubes can further improve their photoresponsivities. The CH₃NH₃PbCl₃‐based photosensor shows a responsivity up to 10⁵ A W^?1 to ultraviolet and no obvious response to visible light, which is superior to that of most ultraviolet sensors. The CH₃NH₃PbBr₃‐based photosensor exhibits a high responsivity to visible light. Serial devices of the two hybrid photosensors with comparable electric and sensory performances can distinguish the spectrum of ultraviolet, visible, and infrared even with varying light intensities. The photosensors also demonstrate excellent mechanical flexibility and bending stability. By taking full advantages of the oraganolead halide perovskites, this work provides flexible high‐responsivity photosensors specialized for ultraviolet, and gives a simple strategy for distinguishable detection of ultraviolet, visible, and infrared spectrum based on the serial flexible photosensors.     

Silver Nanoflower Decorated Graphene Oxide Sponges for Highly Sensitive Variable Stiffness Stress Sensors

Soft conductive materials should enable large deformation while keeping high electrical conductivity and elasticity. The graphene oxide (GO)‐based sponge is a potential candidate to endow large deformation. However, it typically exhibits low conductivity and elasticity. Here, the highly conductive and elastic sponge composed of GO, flower‐shaped silver nanoparticles (AgNFs), and polyimide (GO‐AgNF‐PI sponge) are demonstrated. The average pore size and porosity are 114 µm and 94.7%, respectively. Ag NFs have thin petals (8–20 nm) protruding out of the surface of a spherical bud (300–350 nm) significantly enhancing the specific surface area (2.83 m² g^?1). The electrical conductivity (0.306 S m^?1 at 0% strain) of the GO‐AgNF‐PI sponge is increased by more than an order of magnitude with the addition of Ag NFs. A nearly perfect elasticity is obtained over a wide compressive strain range (0–90%). The strain‐dependent, nonlinear variation of Young's modulus of the sponge provides a unique opportunity as a variable stiffness stress sensor that operates over a wide stress range (0–10 kPa) with a high maximum sensitivity (0.572 kPa^?1). It allows grasping of a soft rose and a hard bottle, with the minimal object deformation, when attached on the finger of a robot gripper.     

Highly Uniform Resistive Switching Properties of Solution‐Processed Silver‐Embedded Gelatin Thin Film

The silver‐embedded gelatin (AgG) thin film produced by the solution method of metal salts dissolved in gelatin is presented. Its simple fabrication method ensures the uniform distribution of Ag dots. Memory devices based on AgG exhibit good device performance, such as the ON/OFF ratio in excess of 10⁵ and the coefficient of variation in less of 50%. To further investigate the position of filament formation and the role of each element, current sensing atomic force microscopy (CSAFM) analysis as well as elemental line profiles across the two different conditions in the LRS and HRS are analyzed. The conductive and nonconductive regions in the current map of the CSAFM image show that the conductive filaments occur in the AgG layer around Ag dots. The migration of oxygen ions and the redox reaction of carbon are demonstrated to be the driving mechanism for the resistive switching of AgG memory devices. The results show that dissolving metal salts in gelatin is an effective way to achieve high‐performance organic–electronic applications.     

Synthesis of Branched DNA Scaffolded Super‐Nanoclusters with Enhanced Antibacterial Performance

Metal nanoclusters (NCs) possess unique optical properties, and exhibit a wide variety of potential applications. DNA with robust molecular programmability is demonstrated as an ideal scaffold to regulate the formation of NCs, offering a rational approach to precisely tune the spatial structures of NCs. Herein, the first use of branched DNA as scaffold to regulate the formation of silver nanoclusters (super‐AgNC) is reported, in which the spatial structures are precisely designed and constructed. Super‐AgNC with tunable shapes and arm‐lengths including Y‐, X‐, and (Y–X)‐ shaped super‐AgNC is achieved. The molecular structures and optical properties of super‐AgNCs are systemically studied. As a proof of application, remarkably, super‐AgNCs exhibit superior antibacterial performance. In addition, super‐AgNCs show excellent biocompatibility with three types of tissue cells including 293T (human embryonic kidney cells), SMCs (vascular smooth muscle cells), and GLC‐82 (lung adenocarcinoma cells). These performances enable the super‐AgNCs adaptable in a variety of applications such as biosensing, bioimaging, and antibacterial agents.