Facile Deposition of Silver Nanoparticles on Photonic Cellulose Nanocrystals Films: A Study on Solvent Stability and Post Antibacterial Activity

Cellulose nanocrystals (CNCs) incorporated with silver nanoparticles (AgNPs) photonic films have drawn considerable attention due to their plasmonic chiroptical activity. However, the exploitation of some fundamental properties for practical use such as the affinity analysis of metal nanoparticles attached to the surface of photonic films according to the solvent compatibility and antibacterial activity under physical conditions has yet not been studied. Hence, a facile process of in situ deposition of AgNPs into the chiral structure of CNC films is proposed. CNC photonic films, cross-linked by glutaraldehyde are prepared. This interaction generated the solvents-stable photonic film with a considerable amount of unreacted aldehyde functional groups that facilitates the reduction of Ag salt to AgNPs. The formed AgNPs in the photonic films show excellent stability over immersion in various polar and non-polar solvents. The post-solvent treated photonic films display excellent contact-based antibacterial behavior against gram-negative Escherichia coli.     

医药副产含磷废盐的提纯研究

随着精细化工及中间体产品的发展,各类副产废盐量不断增加,由于其产生量大及难处理等特点,成为阻碍行业发展的一大瓶颈。主要开展了医药副产含磷废盐的提纯实验研究,针对废盐产生的途径和特性,采用洗脱剂（甲醇-乙醇）+活性炭混合洗脱与重结晶的方式,分别去除废盐中的有机物和氯化钠,回收可利用的磷酸盐,实现废盐的提纯资源化。当洗脱剂与废盐的体积质量比为1 mL/g、洗脱剂甲醇与乙醇的体积比为4∶6、活性炭用量为废盐质量的0.4%时,废盐中的有机物得到了有效去除。随后对得到的混盐进行重结晶得到回收磷酸盐,回收磷酸盐的纯度可达98%以上,符合工业磷酸盐行业标准的要求。将含磷废盐提纯回收磷酸盐,1 t废盐的处理成本约为174.24元,可回收0.61 t磷酸盐,实现了废盐的资源化再利用。     

玻璃钢制品拉拔模具的型腔表面处理工艺

玻璃钢制品拉拔工艺是较为先进的制造工艺之一，拉拔模具是决定玻璃钢制品质量好坏的关键。介绍了玻璃钢制品拉拔模具的型腔表面处理工艺，采用该处理工艺能有效地提高玻璃钢制品的质量。     

Aging and mechanical properties of NR/BR blends

The mechanical properties and post-thermal aging properties of natural rubber (NR) and polybutadiene rubber (BR) blends at different blending ratios are investigated herein. The experimental results show that both tensile and tear strengths of NR/BR blends increase with increasing NR content. BR has a higher compression stiffness than NR. The deformation of BR is less than that of NR under the same load conditions. With regard to aging properties, both tensile stress and strain of NR/BR blends decrease after prolonged aging. In addition, the stress loss of BR is lower than that of NR, meaning that the aging resistance property of BR is superior to that of NR. Furthermore, accumulated thermal history has shifted the glass transition temperature (T _g) of NR/BR blends toward lower temperatures while the loss tangent (tan δ) value increases with prolonged thermal aging.     

Fabrication of composite wire of lead coated on glass fiber by extrusion

1　INTRODUCTIONCoatingglassfiberwithleadproducesakindofnewcontinuouscomposite ,whichcanfindwideap plicationsinmanydifferentfields ,especiallyinthebatteryoftheEVsandHEVsthathasalreadybecomethemostimportantgoalinmostcountries[13] .Withakindofspecialtechnologythiskindofnewcompos itewirecanbeusedtoproducegridsofnewleadacidbatterythatisveryusefultotheEVsandHEVs .Thiskindofnewleadacidbatteryhasmanyadvan tages ,suchashigherspecificenergy ,lessinnerresis tance ,morequicklychargingcapabilityand…     

Enabling factors toward production of nanostructured steel on an industrial scale

Utilizing the existing properties of steel, a modern technological society has been constructed. While there are over 25,000 worldwide equivalent steels based on manipulating the eutectoid transformation, there exist only a handful of commercial nanostructured steel alloys based on manipulating the more complex glass devitrification transformation. Thus, research on nanostructured steels is in its infancy, and many further developments are expected with the demonstrated promise of developing new combinations of superior properties. In this article, seven enabling metallurgical factors are presented that ultimately allow a variety of nanostructured steel products to be produced in an ever-increasing array of industrial processing techniques. Additionally, a case example of the formation of nanostructured steel are given showing how these factors can be harnessed on an industrial scale.     

非晶态Pd—Cu—Si合金的晶化动力学研究

本文应用DSC研究了非晶态Pd-Cu-Si合金的晶化过程动力学.根据Kissinger峰移法和Arrhenius方程分别计算了晶化激活能,发现等温晶化动力学在0.15相似文献   

用铸造废砂制备磷酸盐泡沫陶瓷的研究

以经过活化处理后的铸造废砂为主要原料，以磷酸和磷酸盐为发泡固化剂，再配以必要的添加剂，通过混合搅拌、浇注成型、烧结强化工艺制造的磷酸盐泡沫陶瓷具有高强和多孔特征。研究表明：影响材料性能的主要因素有废砂活性、磷酸、添加剂、烧结工艺以及混合料中的铝硅比等。技术经济分析表明了这项工艺技术具有废物利用量大．生产过程简单，产品用途广泛，对铸造行业的废弃物资源化具有积极意义。