基于非局部算法的序列图像超分辨率重构

提出了一种基于非局部算法的多帧图像超分辨率重构算法,该方法无需进行图像校正。为克服传统图像复原算法基于图像局部点领域的影响,指出可以使用非局部去噪模型的优越边缘保持性和去噪性来重构高分辨率图像。实验证明,该算法在低信噪比情况下,可以取得较好结果,有效解决了低信噪比条件下图像复原的一个难点。     

DCS控制系统在蒸发工段的应用

分析了碱回收蒸发工段的工艺流程和控制要求,从硬件配置和软件设计等方面对碱回收蒸发工段进行了详细的叙述,同时采取软测量的方法测量黑液浓度,提出黑液浓度-压力串级控制方法;根据工艺要求设计出一种新型的DCS控制方法,它是由西门子公司的SIMATIC 400系列PLC连接ET200系列的分布式I/O系统及标准伺服控制系统组成的DP控制网络,通过相应的智能仪表及阀门对现场信号进行采集和控制;由此对碱回收蒸发工段实施集散控制的优化控制法案;工程实践表明,该系统在江苏甲乙粘胶公司生产线上投用,各种控制性指标能够很好地满足公司的要求。     

使用WinHex恢复U盘数据的方法

介绍一种使用WinHex软件恢复找回u盘文件的方法,利用这种方法,u盘使用者通过一些简单的操作步骤,可尝试对偶尔出现的文件误删、误格式化操作进行恢复,挽回损失。     

Design of a 2-DOF-PID controller using an improved sine–cosine algorithm for load frequency control of a three-area system with nonlinearities

This paper proposes an improved sine–cosine algorithm (ISCA) based 2-DOF-PID controller for load frequency control. A three-area test system is built for study, while some physical constraints (nonlinearities) are considered for the investigation of a realistic power system. The proposed method is used as the parameter optimizer of the LFC controller in different scenarios. The 2-DOF-PID controllers are used because of their capability of fast disturbance rejection without significant increase of overshoot in set-point tracking. The 2-DOF-PID controllers’ efficacy is observed by examining the responses with the outcomes obtained with PID and FOPID controllers. The simulation results with the suggested scheme are correlated with some of the existing algorithms, such as SCA, SSA, ALO, and PSO in three different scenarios, i.e., a disturbance in two areas, in three areas, and in the presence of physical constraints. In addition, the study is extended to a four-area power system. Statistical analysis is performed using the Wilcoxon Sign Rank Test (WSRT) on 20 independent runs. This confirms the supremacy of the proposed method.     

Preparation of Porous Silver Nanowires-Melamine Formaldehyde Hybrid Composite Materials and Their Electromagnetic Shielding and Flame-Retardant Properties

Along with the booming development of communication technology and electronic equipment, higher requirements of flame-retardant and EMI shielding performances for electromagnetic interference (EMI) shielding materials are put forward. Herein, the ultralight and porous silver nanowires (AgNWs)-melamine formaldehyde (MF) hybrid composite with unique micro-/nanostructure is developed by a facile dip-coating method, which uses the AgNWs as 1D conductive coating and MF foam (MF foam) as 3D skeleton template. Benefiting from the unique porous micro-/nanostructure, the resultant hybrid composite displays low density, excellent EMI shielding performances, and superior flame-retardant property. The EMI shielding effectiveness (SE) and specific EMI SE (SSEt) of the hybrid composite in X-band (8.2–12.4 GHz) can be up to 77 dB and 26971.4 dB cm⁻² g⁻¹, respectively. At the same time, the hybrid composite also passes the vertical burning test and shows an increased LOI value of 40.6%. The combination of flame-retardant and EMI shielding performances for EMI shielding materials makes the AgNWs-MF hybrid composite great application potential in civil and military fields. This work provides a new guide for the design of multifunctional high-performance EMI shielding materials.     

Recovery of sensor embedded washing machines using a multi-kanban controlled disassembly line

Product recovery involves the recovery of materials and components from returned or end-of-life products. Disassembly, an element of product recovery, is the systematic separation of an assembly into its components, subassemblies or other groupings. Stricter environmental regulations together with dramatic decrease in natural resources and landfills have increased the importance of disassembly as all product recovery options require some level of disassembly. Due to changes made during the lifetime of a product by customers or service personnel, the number and the version of components prior to disassembly is unknown. Customers may also discriminate between and demand different versions of components. The existence of non-functional components further adds to the uncertainty associated with disassembly yield. Sensors implanted into products during their production can address this uncertainty by providing information on the number, condition and version of components prior to disassembly. In this study, we evaluate the impact of sensor embedded products (SEPs) on the various performance measures of a washing machine (WM) disassembly line controlled by a multi-kanban system, which takes into consideration the highly stochastic behavior of the line while managing material and kanban flows. First, separate design of experiments studies based on orthogonal arrays are performed for conventional products and SEPs. In order to observe the response of each experiment, detailed discrete event simulation (DES) models for both types of products are developed considering the precedence relationships among the components of a WM. Then, pair-wise t-tests are conducted to compare the two cases based on different performance measures. According to the results, SEPs provide significant reductions in all costs (viz., backorder, holding, disassembly, disposal, testing and transportation) while increasing revenue and profit.     

广西镇龙山金（银）矿的构造控制特征

本文阐述了广西镇龙山金（银）矿化集中区内主要断裂构造的基本特征,并指出,其中规模较大的,与矿化关系较密切的主要是近ＥＷ向,次为近ＳＮ向断裂,它们组合成线状,交叉状和放射状断裂带,并严格控制着区内岩浆岩、矿化带、矿脉、矿体和“富矿包“的空间展布。这对找矿评价和预测盲矿体都具有实际意义。     

Thermopower ofAg_{2 + \delta } S across theα-β transitionacross theα-β transition

Thermopower data of S in both of itsα- andβ-phases are reported and the results are compared with the data on Se. Communication No. 129 from the Solid State and Structural Chemistry Unit.     

金矿矿石可选性试验研究

对我国某金矿矿石进行浮选可行性试验研究,通过研究得到了精矿石粗选和精选的最佳工艺数据,为该矿山选厂设计提供了必要的浮选试验数据。     

物联网技术在资源回收体系中的应用研究

随着物联网技术的不断成熟,物联网技术的应用领域也在不断的扩大,物联网产品开始进入大众的生活中,为不同的领域提供着便捷的服务。物联网技术的实质是通过物联网的相关技术完成物与物之间的信息交互并最终能够智能的完成工作。目前,物联网技术在物资回收领域中的应用并不成熟,也没有形成具体的应用产品,本文针对物资回收体系进行研究,提出一套可行的基于物联网技术的物资回收解决方案。