25℃NH_4Cl-KCl- H_2O三元体系相平衡的研究

研究了２５℃ＮＨ４Ｃｌ－ＫＣｌ－Ｈ２Ｏ三元体系的固液相平衡关系,测定出有关溶解度数据, 结果表明该体系存在纯 ＮＨ４Ｃｌ、纯 ＫＣｌ、 ＮＨ４Ｃｌ为主的固溶体及 ＫＣｌ为主的固溶体等 ４个 结晶区．     

十六胺乙基磺酸钠的合成和性能研究

以十六胺和溴乙磺酸钠为原料合成了十六胺乙基磺酸钠,用单因素优选法研究了影响反应的因素,优化反应条件为n（十六胺）：n（溴乙磺酸钠）=1．0：1．3,反应温度80℃,反应时间7．0h,pH值9．0～10．0,产物质量收率89．64％,提纯后纯度93．25％,并对十六胺乙基磺酸钠的应用性能进行了测定．     

硫酸盐还原菌利用玉米发酵液为碳源还原地下水中的硫酸盐

将玉米发酵液作为微生物硫酸盐还原体系的碳源,可大幅降低还原成本,对实现硫酸盐废水经济、高效处理具有重要意义。探究了复合碳源比例、碳硫比(C/S)和pH等对硫酸盐还原菌(SRB)还原硫酸盐的影响。结果表明：在初始SO₄^2-浓度为(1 000±50)mg/L时,5种复合碳源比例均能获得较好的硫酸盐还原效果,剩余SO₄^2-浓度均小于地下水质量标准Ⅳ类水质350 mg/L要求;当初始C/S=0～3.5时,随C/S比升高,SRB的硫酸盐还原速率增加,但碳源的硫酸盐还原利用效率下降;在初始pH接近7.0时SRB硫酸盐还原活性最佳。反应体系pH和ORP值的变化可准确指示细菌活性变化。     

多种金属氧化物混合物的固溶体的穆斯堡尔效应及XRD分析研究

在αFe_2O_3中依次累积加入K_2O、Cr_2O_3、CuO、MGO和SiO_2形成不同混合物,在空气中800℃活化焙烧5h后,发现αFe_2O_3和所加氧化物之间发生了不同的反应,生成不同的化合物。该结果有助于进一步理解这些氧化物作为助剂和载体的作用。     

贫液除杂与污水零排放的试验研究

根据仓上金矿生产实际情况,探讨了贫液除杂质的途径及除杂后对浸出效果的影响,为仓上金矿实现氰化污水零排放提供了基础资料。     

ZL205A高强度铝铜合金的铸造及热处理

探讨了ＺＬＮ２０５Ａ高强度铝铜合金的铸造性能和热处理工艺方法，阐述了ＺＬ２０５Ａ铝铜合金在Ｔ５热处理时，如何才能达到机械性能的工艺方法。     

利用均匀设计试验进行混凝土配合比优化

提出了混凝土配合比试验的均匀设计方法,采用逐步回归法对试验数据进行回归拟合,以经济成本为目标函数,利用目标规划的方法进行混凝土配合比优化．     

Effect of postmolding heat treatment on in vitro properties of a polyanhydride implant containing gentamicin sulfate

A polyanhydride implant containing gentamicin sulfate was fabricated using a laboratory-scale injection-molding machine. After injection molding, the implants were subject to heat treatment at 60°C for various time periods with or without nitrogen protection. The impact of this heat treatment on the in vitro properties of the implants including copolymer molecular weights, mechanical properties, and in vitro drug-release profiles was investigated. This heat treatment caused a drastic drop in the molecular weight of the copolymer. Heating without nitrogen protection resulted in the hardening of the implant, but heating in the presence of nitrogen rendered the implant less rigid. It was also found that a faster in vitro drug release profile was shown by implants heated without nitrogen protection and a pronounced slowing down in drug release was exhibited by implants heated with nitrogen protection.     

Levy-type solution for buckling analysis of orthotropic plates based on two variable refined plate theory

This paper presents closed-form solution for buckling analysis of orthotropic plates using two variable refined plate theory. The theory accounts for a quadratic variation of the transverse shear strains across the thickness, and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. Governing equations are derived from the principle of minimum total potential energy. The closed-form solutions of rectangular plates with two opposite edges simply supported and the other two edges having arbitrary boundary conditions are obtained by applying the state space approach to the Levy-type solution. Comparison studies are performed to verify the validity of the present results. The effects of boundary condition, loading condition, and variations of modulus ratio, aspect ratio, and thickness ratio on the critical buckling load of orthotropic plates are investigated and discussed in detail.     

A_Ⅰ型多元固溶体价电子结构的计算

利用“固体与分子经验电子理论”提出:1)A(?)型多元置换、间隙式固溶体价电子结构计算的模型;z)末知键距结构的键距差(BLD)分析方法;3)BLD分析中解的不唯一性的处理。