Structural characterization of reactor blends of polypropylene and ethylene‐propylene rubber

Blends of isotactic polypropylene (PP), ethylene‐propylene rubber copolymer (EPR), and ethylene‐propylene crystalline copolymer (EPC) can be produced through in situ polymerization processes directly in the reactor and blends with different structure and composition can be obtained. In this work we studied the structure of five reactor‐made blends of PP, EPR, and EPC produced by a Ziegler‐Natta catalyst system. The composition of EPR was related to the ratio between ethylene and propylene used in the copolymerization step. The ethylene content in the EPR was in the range of 50–70 mol %. The crystallization behavior of PP and EPC in the blends was influenced by the presence of the rubber, and some specific interactions between the components could be established. By preparative temperature rising elution fractionation (P‐TREF) analysis, the isolation and characterization of crystalline EPC fractions were made. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2155–2162, 2004     

尼龙1212/EPDM-g-MAH共混体系的制备及性能研究

制备了尼龙（PA）1212／EPDM－g-MAH共混物，并对其力学性能、热性能及共混形态进行了研究，结果表明，增韧剂的加入使共混物的缺口冲击强度显著增大，当增韧剂含量为20％时，缺口冲击强度为74．98kJ/m^3，是纯PA1212的13．5倍；用二甲苯处理过的共混物试样断面很不平坦，有很多孔洞和类纤维体，说明弹性体粒子以球状分散于基体树脂中。     

Self-emulsifiable soybean oil phosphate ester polyols for low-VOC corrosion resistant coatings

A series of soybean oil phosphate ester polyols (SOPEP) was prepared by reaction of fully epoxidized soybean oil with phosphoric acid and simultanoeous hydrolysis in the presence of a polar solvent. The polyols were characterized by determination of acid value, oxirane number, hydroxyl value, molecular weight (GPC), and FTIR spectra. These polyols with varying amounts of acid phosphate groups could be self-emulsified to form aqueous dispersions after neutralization with organic base. These aqueous dispersion showed varying degrees of stability and their appearance ranged from opaque dispersions to translucent to clear solutions. Waterborne coating compositions were prepared using these aqueous dispersions as principal components and their thermally cured film properties were studied. it was found that by careful selection and formulation, SOPEPs can be successfully used for low-VOC waterborne coating formulations. SOPEPs with 3.5% phosphate ester content showed visibly superior corrosion resistance properties.     

PTT／PP／PP-g-MAH共混材料的形态与性能研究

研究了马来酸酐接枝聚丙烯(PP-g-MAH)对聚对苯二甲酸丙二酯(PTT)/聚丙烯(PP)共混体系的形态结构和性能的影响。结果表明,PP在PTT连续相中分散均匀,粒子尺寸随着增容剂含量的增加而细化,分散相与连续相之间有较好的黏结作用,PP-g-MAH改善了PP与PTT的相容性。共混物熔体为假塑性流体,其假塑性随PP-g-MAH含量的增加而升高,熔体表观黏度从1．31 Pa·s降低到1．19 Pa·s,黏流活化能从64．5 kJ/mol降低到36．7 kJ/mol。共混物中PTT和PP可分别结晶,但结晶行为相互影响,PP-g-MAH促进了PTT在高温结晶。共混物的冲击强度随着PP-g-MAH含量的增加从14．2 kJ/m~2提高到33．5 kJ/m~2,拉伸强度在PP-g-MAH含量为5％～10％(质量分数,下同)时最大。共混物的热稳定性随着PP-g-MAH含量的增加而逐渐降低。     

Preparation of silk fibroin and polyallylamine composites

Composite films made of silk fibroin (SF) and polyallylamine (PAA) are prepared that contain various compositional ratios. These materials are analyzed to elucidate the resulting physical properties and to assess their potential toward advanced applications as industrial materials. The composite films are obtained from a SF and PAA binary system by dry casting from aqueous solution. These composite films exhibit excellent processability such as film forming capabilities, and the elongation at break is increased in the wet state. The differential scanning calorimetry (DSC) curves of the composites suggest that a mutual interaction takes place between the SF and PAA. This interaction is believed to occur because the endothermic peak, corresponding to the individual polymer, shifts with increasing SF content. The random coil conformation of the SF is present, regardless of the PAA blending, as confirmed by FTIR and DSC measurements. Additionally, living cells from Antheraea pernyi and Bombyx mori insect tissues are shown to grow effectively on the composite films. Maximum growth levels occur when the cultivation flask is coated with the material in SF/PAA ratios of 75:25 to 25:75. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1963–1970, 2002; DOI 10.1002/app.10491     

Supercritical CO2‐assisted synthesis of poly(acrylic acid)/Antheraea pernyi SF blend

Monomer acrylic acid (AA) and initiator azo‐bis(isobutyronitrile)were carried into Antheraea pernyi silk fibroin (SF) fibers using supercritical CO₂ as a solvent and carrier, followed by free radical polymerization at a suitable temperature, resulting in PAA/SF blends. The binary system of CO₂/AA and the ternary system of CO₂/AA/AIBN systems were studied. Different impregnation conditions, such as time, pressure, and concentration of AA in the fluid phase on mass uptake, were studied. Fourier transform infrared spectroscopy and X‐ray diffraction results confirmed that PAA was indeed present in the silk and that there were intermolecular hydrogen bonds between PAA and SF. According to thermogravimetry and DTG, blending with PAA could enhance the thermal stability of SF slightly. The water retention values indicated that the hydrophilic nature of the fibers was improved. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 864–868, 2005     

气相色谱仪在丙基型硅烷偶联剂催化合成中的应用

通过筛选获得了最佳色谱条件，建立较为可行的丙基型硅烷偶联剂催化合成气相色谱分析方法，为实验室研究合成硅烷偶联剂探索高效催化剂提供了快速的检测方法。     

表面活性剂对HCl-FeCl3溶液中锌精矿在浆萃取浸出率的影响

The effects of surfactant on the solvent extraction in leaching sphalerite were investigated. It is found that sodium dodecyl sulfonate is the effective surfactant in improving the zinc recovery from sphalerite in the aqueous FeCl3-HCl-tetrachloroethylene system. Through the measurements of surface tension and viscosity of the sphalerite slurry modified with different surfactants, it is concluded that sodium dodecyl sulfonate in the concentration range of 0.05 to 0.2g L-1 can improve the viscosity of sphalerite slurry in the water, decrease the surface tension of leaching solution, prevent the aggregation of ore particles, and give very high zinc extraction .     

新溶剂体系对SBS生产工艺的影响

讨论了一种新溶剂体系对热塑性弹性体SBS工业生产工艺条件的影响，并与原应用纯环己烷溶剂的生产工艺进行比较。工业试生产结果表明，对SBS生产中溶剂精制工艺过程，应用新溶剂体系时精制塔系的气相压力增大，塔温降低，聚合反应单体质量分数在l8．0％～20．0％时对聚合反应与凝聚工艺控制没有影响，可较显著地提高装置生产能力，降低产品生产成本，同时其凝固点较低，有利于提高SBS生产体系对季节与地域的适应能力。     

纤维素LiCl/DMAc溶液流变性能研究

本文研究了9％LICI／DMAC纤维素溶液的流变性能。在该体系中纤维素溶液是非牛顿流体，属于假塑性流体，具有典型的幂律性。通过幂律方程拟合计算，其稠度系数为60～135，流动特性指数为0.62～0．70。随着浓度增大，稠度系数增大和流动特性指数降低；温度的变化对流动特性指数的影响不大，温度升高，流动特性指数略有减小，而稠度系数相对增大。溶液的粘度随着剪切速率的增大，开始时粘度迅速降低，后趋于稳定，这可能与纤维素分子在溶液中的取向有关。在不同剪切速率下，其流动活化能为23～30kJ．