Relaxation phenomena caused by equilibration of point defects

Relaxation phenomena due to equilibration of point defects in metals are reviewed. The relaxation effect in specific heat observed in tungsten and platinum confirms that in both cases the nonlinear increase in the high-temperature specific heat has to be attributed to point-defect formation. Relaxation phenomena observed by measurements of electrical resistivity and positron annihilation are also considered. The comparison of the data seems to be favorable for the conclusion that all the phenomena are of one origin.     

应用地层测试流动段资料确定油井稳定产能方法研究

提出了一种根据地层测试流动段压力资料预测油井稳定产能的方法，该方法以比采油指数作为对比参数，对测试比采油指数的计算进行了推导，采用回归分析方法建立了测试比采油指数和生产比采油指数之间的关系式。应用建立的关系式对其它井的稳定产能进行了预测，误差分析表明预测结果比较正确。     

电容位移法精确测量磁性薄膜的磁致伸缩系数

介绍了一种精确测量磁性薄膜磁致伸缩系数方法－电容位移法，并自行研制组装了一套测量装置，通过误差分析，仪器的精确标定，对稀土－铁超磁致伸缩薄膜的磁致伸缩系数进行了测量，获得满意的结果。     

Effect of doping polyacrylic acid with some dopants as studied by different techniques

The molecular weight of polyacrylic acid (PAA) was determined by a viscometric method using NaNO₃ as solvent at 30°C. The specific electric conductivities (σ) of PAA as well as PAA doped with carbon black (CB), chromium oxide (Cr₂O₃), and cupferron with different concentrations (from 0.25 to 1 wt %) were measured at a temperature range 360–400 K. IR spectra of some polymers were determined and it was shown that when PAA was doped with 0.5 wt % CB, a C? O? C band appeared at 775–875 cm^?1. The positron annihilation lifetime (PAL) spectra in PAA doped with the above‐mentioned dopants were measured as a function of their concentrations. It was observed that the short lifetime intensity I₁ decreased, whereas the intermediate lifetime intensity I₂, which is related to the conductivity of the material, increased with increasing the wt % of Cr₂O₃ and cupferron as well as at low concentrations of CB. These results are discussed in terms of the conducting island model. It was found that there were distinct positive relationships between σ and I₂. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 877–883, 2002; DOI 10.1002/app.10381     

含RDX的硝胺丁羟推进剂能量特性研究

采用最小自由能平衡流法对RDX/AP/Al/HTPB推进剂能量特性进行了理论计算。通过BSF165mm和BSF315mm发动机点火试验,研究了RDX含量、燃烧室压强对RDX/AP/Al/HTPB推进剂能量特性的影响规律。根据理论计算和发动机试验结果,对配方进行了优化设计,与某型号760mm全尺寸发动机的实测结果对比,其实测比冲高达2428.1N·s·kg-1(pc=6.86MPa),验证了RDX的加入对RDX/AP/Al/HTPB推进剂比冲有较突出贡献。     

Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application

The formation of a low Cr-volatility and electrically conductive oxide outer layer atop an inner chromia layer via thermal oxidation is highly desirable for preventing chromium evaporation from solid oxide fuel cell (SOFC) metallic interconnects at the SOFC operation temperatures. In this paper, a number of ferritic Fe–22Cr alloys with different levels of Mn and Ti as well as a Ni-based alloy Haynes 242 were cyclically oxidized in air at 800 °C for twenty 100-h cycles. No oxide scale spallation was observed during thermal cycling for any of these alloys. A mixed Mn₂O₃/TiO₂ surface layer and/or a (Mn, Cr)₃O₄ spinel outer layer atop a Cr₂O₃ inner layer was formed for the Fe–22Cr series alloys, while an NiO outer layer with a Cr₂O₃ inner layer was developed for Haynes 242 after cyclic oxidation. For the Fe–22Cr series alloys, the effects of Mn and Ti contents as well as alloy purity on the oxidation resistance and scale area specific resistance were evaluated. The performance of the ferritic alloys was compared with that of Haynes 242. The mismatch in thermal expansion coefficient between the different layers in the oxide scale was identified as a potential concern for these otherwise promising alloys.     

Analyses and Solutions of Specific Cases in Spatial Angles Calculation

1 Introduction “Spatial Angles Calculations” means that all the calculations of given and unknown parameters are related to calculating angles in 3D space. The functions and relevant parameters in 3D space are much more complicated than that in 2D space, i.e. on a plane. Professor Sun, based on his research conducting for more than a decade, presented a series of new algorithms to calculate angles in space which are valuable in both theory and applications[1]. The authors found that, in g…     

液态挤压在铝合金减震筒上的应用：液态挤压比压值对制件性能影响的分析

指出了压力铸造及热挤压工艺生产铝合金减震筒的缺点，阐述了液态挤压的特征，介绍了液态挤压在减震筒上的应用，分析了比压值对制件性能的影响。     

长垣东部深井井壁失稳及技术对策

大庆油田在长垣东部深层油气田勘探开发过程中存在井眼不稳定问题。在对深层失稳井段资料调研的基础上，开展了易塌地层泥页岩水化膨胀及分散特性评价以及比亲水量研究。通过泥页岩--试液模拟作用的化学位差反渗透实验以及压力传递实验等，探讨了不同条件下泥页岩水化应力变化规律。利用井壁稳定性模拟实验装置（SHM仪），评价了不同钻井液防塌效果。理论分析和实验表明，当使用水基钻井液在复杂泥页岩地层钻进时，如何控制泥页岩压力传递和流体侵入是解决泥页岩井壁不稳的技术关键。使用长垣东部深层泥页岩与硅酸盐钻井液作用的实验表明，硅酸盐钻井液能显著降低泥岩渗透率，阻止钻井液滤液与孔隙压力的传递，改善膜效率，有助于充分发挥化学位差诱导的反渗透防塌作用效果。     

基于电容测量和PCA法的两相流相浓度检测方法

介绍利用电容层析成像系统阵列传感器结构和采样特点,引入主成分分析法(PCA)求取两相流相浓度的新方法.对大量测量值样本进行统计分析后,求出用测量值第一主成分求取相浓度的经验公式,仿真及静态实验表明:两者之间有着良好的对应关系,其测量结果不受两相流流型的影响,是一种有较好应用前景的测量方法.