空冷淬火Cu-Zn-Al合金马氏体结构及稳定化现象

利用Ｘ射线衍射强度分析、透射电镜观察、相变点测量等方法研究了空冷淬火态Ｃｕ１８Ｚｎ１４Ａｌ合金马氏体结构及其稳定化现象。认为该合金空冷淬火可获得长程有序完全的Ｍ１８Ｒ马氏体，其有序组态为Ａｌ原子与Ｃｕ原子、Ｚｎ原子与Ｃｕ原子两种近邻（ｎｎ）有序（Ｋ＝偶，Ｈ＋Ｋ／２＝奇），以及产生Ｋ＝奇的衍射中Ａｌ原子与Ｚｎ原子次近邻（ｎｎｎ）有序。其基面原子分布为：Ⅰ—１４２５Ａｌ＋１１２５Ｃｕ、Ⅱ—Ｃｕ、Ⅲ—１８２５Ｚｎ＋７２５Ｃｕ。与此相对应，该合金相应为Ｈｅｕｓｌｅｒ结构。该合金在充分有序化的条件下仍存在马氏体稳定化。     

Boron Nitride Nanosheets Strengthened PVA/Borax Hydrogels with Highly Efficient Self-Healing and Rapid pH-Driven Shape Memory Effect

Self-healing hydrogels often possess poor mechanical properties which largely limits their applications in many fields. In this work, boron nitride nanosheets are introduced into a network of the poly(vinyl alcohol)/borax (PVA/borax) hydrogels to enhance the mechanical properties of the hydrogel without compromising the self-healing abilities. The obtained hydrogels exhibit excellent mechanical properties with a tensile strength of 0.410 ± 0.007 MPa, an elongation at break of 1712%, a Young's Modulus of 0.860 ± 0.023 MPa, and a toughness of 3.860 ± 0.075 MJ m⁻³. In addition, the self-healing efficiency of the hydrogels is higher than 90% within 10 min at room temperature. Benefiting from the excellent self-healing properties, the shapeability of the hydrogel fragments is observed using different molds. In addition, the hydrogels display rapid pH-driven shape memory effects and can recover to their original shape within 260 s. Overall, this work provides a new approach to hydrogels with integrated excellent mechanical properties, self-healing abilities, and rapid pH-driven shape memory effects.     

速动形状记忆合金元件设计原理

提出了评价速动双程形状记忆元件性能的主要参数,并说明了设计实用速动元件的原理和方法。     

超细粉颗粒形貌控制技术的研究

颗粒形貌对颗粒群的许多性质具有重要的影响。本研究以流化床气流磨加工碳化硅磨料微粉为实例，对颗粒形貌控制的基本因素进行理论分析与实验研究，并探讨了超细加工后的整形技术及超细加工前的预处理技术。可获得球形化程度好的等积形颗粒形貌，也可获得较好的多棱形颗粒形貌，这对提高超细粉的工业价值和经济价值，扩大应用领域和范围，具有重要的意义。     

钨尾矿微晶玻璃的形状记忆效应

研究了钨尾矿微晶玻璃的形状记忆效应（ＳＭＥ），并用Ｘ射线衍射法（ＸＲＤ）作了相分析。结果表明，钨尾矿微晶玻璃具有明显的ＳＭＥ；恢复应变随回复保温温度升高而增加；该材料随着变形量的减小，形状恢复率随之上升     

Cu基形状记忆合金干滑动磨损研究

对Cu基形状记忆合金CuZnAl进行了干滑动磨损,采用扫描电镜观察磨损表面及磨屑.结果表明,CuZnAl合金的磨损过程受塑性变形控制,粘着与转移磨损和剥离磨损是材料失重的两种主要机制.电镜薄膜拉伸时显微裂纹尖端发生了应力诱发马氏体相变.用显微裂纹钝化作用的马氏体择优取向机制和应力诱发马氏体相变机制阐述了这种软基体高变形能力材料的耐磨本质。     

EFFECT OF RESIDUAL STRESS ON THE MARTENSITIC TRANSFORMATION OF SPUTTER-DEPOSITED SMA THIN FILMS

TiNi thin films were sputter-deposited on circular single-cry stal silicon substrates un-der various sputtering parameters. The crystal structure and residual stress of the as-deposited films were determined by X-ray diffraction and substrate-curvature method. The phenomenon of stress-suppressed martensitic transformation was observed. R is considered that the residual stresses in SMA thin films based on circular substrates act as balanced biaxial tensile stresses. The status of equilibrant delays the align-ment of self-accommodated variants and the volume shrinkage during the martensitic transformation.     

应用有限元方法对高速电主轴的优化设计

介绍了高速电主轴的结构特点，应用有限元分析软件ANSYS以刚度为目标对高速电主轴进行了优化设计，并对优化后的结构进行了热态校核。     

铜锌铝合金表面非线性振荡花样的研究

在Ｃｕ－Ｚｎ－Ａｌ形状记忆合金表面观察到尚未被人们认识的非线性振荡花样。这些花样经计算机图像处理得知，在空间和时间上明显呈现分形特征。这种振荡花样的产生可能与未知相变的预转变过程有关。     

NiTi形状记忆合金螺钉的研制及医学应用

成功地研制了一种新型NiTi形状记忆合金螺钉并已临床应用了150例,经3年多考核,未发现骨不连及股骨头缺血坏死现象。