Structure development in amorphous starch as revealed by X‐ray scattering: Influence of the network structure and water content

The evolution of the amorphous structure of starch was characterized during the drying process by real‐time X‐ray wide‐angle scattering. The X‐ray diffractograms of injection‐molded starch show two superposed, rather broad, scattering maxima indicative of noncrystalline structures. The location of the two peaks has been associated to disordered starch single helices. A third maximum that arises upon drying the material in vacuum is associated to the scattering emerging from regions containing double helices. A model for the starch network is proposed, assuming a primary and a secondary component. The wider, temperature stable component appearing first, is correlated to the entanglement network of the melt. The narrower network component, which is created later, at lower temperature (secondary network), is explained by the formation of double helix regions that densify the wider primary network. The secondary network is increased strongly by the drying process. X‐ray experiments performed during the penetration of water, provoking a higher molecular mobility, reveal a better‐packed helical structure that becomes the precursor of a double helix crystalline formation. When temperature increases, the secondary network is dissolved and water molecules arrange themselves in better‐organized crystals as strongly bound crystal water. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1880–1886, 2006     

以淀粉为原料的化工制品

综述了以淀粉为原料而得到的多种化学品的性质和应用。淀粉来自可更新资源，具有良好的可获得性，而且价格低廉，因此某些以淀粉为原料所得到的化学品与来自其他资源的化学品(例如石油化学品等)相比，具有较多的优越性。重点介绍的这类化学品有：表面活性剂、超强吸水剂、可生物降解塑料、絮凝剂和粘结剂等。     

Investigation of the Influence of Fillers on the Properties of Poly(vinyl acetate) Adhesives

The properties of poly(vinyl acetate) compositions prepared as potential wood adhesives were investigated. The paper presents the results of the influence of various kinds of inorganic fillers based on calcium carbonate and alumino-silicate and an organic filler, starch, on the adhesive composition properties. The comparison among rheological behavior of the adhesive dispersions concerning the specific role of fillers were made. Mechanical and relaxation properties of the adhesive films could reveal the effect of filler characteristics on the polymer matrix. The significant influences of particle size distribution and specific surface area on the poly(vinyl acetate) adhesive composition were determined, along with other filler characteristics.     

从煤炭、天然气制取石油石化产品工艺技术

在阐述煤炭、天然气通过吹氧气化制取CO +H2 合成气联产石油石化产品的基础上 ,详细介绍了甲醇、二甲醚、乙烯生产工艺技术的应用与开发 ,对各种工艺路线进行了论证和技术经济评估     

快固化淀粉粘合剂的研究

介绍了快固化玉米淀粉粘合剂的制备工艺,对制备参数进行了优化,可使粘合剂的初粘速度和干燥速度显著提高。     

聚醚多元醇中环状齐聚物的去除(续)

(接上期第 2 3页 )3　膜分离Doraietal[16] 通过超滤除去低相对分子质量级份 ,使聚醚多元醇 ,尤其是聚四氢呋喃多元醇 ,具有较窄的分布 (Mw∶Mn=1 .2～ 1 .8)。该方法通过对多分散的熔融聚合物实施物理分级 ,达到降低相对分子质量分布的目的 ,可使最终产物的相对分子质量为 40 0～ 40 0 0 ,分散度为 1 .2～ 1 .8。该方法首先需要准备 1套交叉流动的膜分离系统 ,采用渗透膜或半渗透膜 ,膜的一边是滞留物 ,另一边是超滤液。然后 ,在起始聚合物的熔点以上 ,分解温度以下 ,且温度不大于膜的熔融和分解温度 ,将起始聚合物熔融 ,并流入该系统中…     

3-氯-4-（2-溴甲基-4-甲基-1，3-二恶戍烷-2-基）苯基-4’-氯苯基醚的合成

3-氯-4-（2-溴甲基-4-甲基-1，3-二恶戍烷-2-基）苯基-4’-氯苯基醚是杀菌剂苯醚甲环唑的一个重要中间体。以2-氯-4-（4-氯苯氧基）-苯乙酮为起始原料，采用溴化和合环同时进行的合成工艺制得该化合物，收率90％．产品含量95％。优化了反应条件，简化了操作。     

浅谈环保型助溶剂丙二醇醚的现况与应用

简要介绍了丙二醇醚国内外现状以及丙二醇醚的环保性评价和用途。     

一水合硫酸氢钠催化β-萘甲醚的合成

利用一水合硫酸氢钠催化合成 β 萘甲醚 ,3 6 gβ 萘酚 ,3ml甲醇 ,1 5g一水合硫酸氢钠 ,80℃反应5h ,HPLC分析产率达 78 3%。固体催化剂容易过滤分离。     

Mechanical properties of a cryogenically mechanically alloyed polycarbonate–poly(aryl ether ether ketone) system

The processing–property relationship of a model cryogenically mechanically alloyed polymer–polymer system [polycarbonate (PC) and poly(aryl ether ether ketone) (PEEK)] was investigated. PC and PEEK powders were cryogenically mechanically alloyed for 10 h, and the resulting two‐phase powder particles were processed into testable coupons with a miniature ram‐injection molder. The bulk mechanical properties of the coupons made from the mechanically alloyed powders and nonmechanically alloyed powders were investigated as a function of mechanical alloying and injection‐molding parameters. The injection‐molded coupons were mechanically tested in the three‐point‐bending mode. The results demonstrated that no measurable improvement was achieved in the energy to break, strain at failure, or failure strength in the coupons made from the mechanically alloyed materials in comparison with those of the coupons made from the nonmechanically alloyed powders. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1196–1202, 2003