Study of the copper leaching in the wet oxidation of phenol with CuO-based catalysts: Causes and effects

Catalytic wet oxidation of phenol as a model pollutant has been performed in a three phase fixed-bed reactor (FBR) by using a commercial catalyst based on copper oxide in order to analyze the variables affecting significantly the copper leaching. It has been found that temperature has an almost negligible influence in the range studied (70–160 °C). On the contrary, an important effect of the pH value was noticed. The copper leaching reduces when the pH of the solution fed to the reactor increases, being almost negligible at pH ≥ 5. Moreover, the composition of the reaction media also influences the leaching. Higher copper concentrations than those expected by the effect of the acid aqueous media have been measured in the reactor effluent when phenol, catechol, hydroquinone, p-benzoquinone and maleic acid are present in the reaction media. On the contrary, oxalic acid has a negative influence on the leaching, since it captures the copper in solution to form copper oxalate which precipitates on the catalyst surface. For a previously acidified medium, the acetic and formic acids do not have any other effect on the copper leaching. It has been also demonstrated that as copper in solution decreases, so does phenol conversion, because the homogeneous catalysis contributes significantly to the oxidation reactions even in fixed-bed reactors.     

微孔无机膜反应器研究

主要介绍了无机膜在化学反应中的应用－－膜反应器研究，对膜反应器的特点、类型、应用、影响因素以及与其它反应器的比较进行了评述，并对其应用前景进行了展望。     

Continuous production of structured phospholipids in a packed bed reactor with lipase from <Emphasis Type="Italic">Thermomyces lanuginosa</Emphasis>

The possibilities of producing structured phospholipids between soybean phospholipids and caprylic acid by lipase-catalyzed acidolysis were examined in continuous packedbed enzyme reactors. Acidolysis reactions were performed in both a solvent system and a solvent-free system with the commercially immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) as catalyst. In the packed bed reactors, different parameters for the lipase-catalyzed acidolysis were elucidated, such as solvent ratio (solvent system), temperature, substrate ratio, residence time, water content, and operation stability. The water content was observed to be very crucial for the acidolysis reaction in packed bed reactors. If no water was added to the substrate during reactions under the solvent-free system, very low incorporation corporation of caprylic acid was observed. In both solvent and solvent-free systems, acyl incorporation was favored by a high substrate ratio between acyl donor and phospholipids, a longer residence time, and a higher reaction temperature. Under certain conditions, the incorporation of around 30% caprylic acid can be obtained in continuous operation with hexane as the solvent. Presented at the 95th American Oil Chemists' Society Annual Meeting and Expo in Cincinnati, Ohio, May 10, 2004.     

2-[N-甲基-N-(2-吡啶基)氨基] 乙醇制备条件的优化

2-[N-甲基-N-(2-吡啶基)氨基]乙醇是合成罗格列酮(Rosighitazone)的一种中间体，罗格列酮是新型噻唑烷二酮类胰岛素增敏剂，通过两轮优化设计，实验室小试得到了较好的反应条件．为工业化生产提供了基础数据。     

Biomass pyrolysis in a circulating fluid bed reactor for the production of fuels and chemicals

An approach for biomass flash pyrolysis in a circulating fluid bed (CFB) reactor with continuous solids regeneration is described in this study. The unit is capable of performing conventional and catalytic biomass pyrolysis with the proper solid selection. The production of improved quality liquid products in a direct step through catalytic pyrolysis is investigated in this work. Both conventional and catalytic biomass pyrolysis can be effectively performed in this CFB unit. Flash pyrolysis conditions were achieved and liquid product yields of ∼70 wt% (on biomass feed) were obtained. The effect of specific operating variables including the type of inorganic solid material and the solid/biomass ratio was established on the final liquid product quality and yield. Solid materials considered included silica sand, a commercial fluid catalytic cracking catalyst and a ZSM-5 additive. Catalytic biomass pyrolysis generally leads to the production of additional water, coke and gases compared to conventional pyrolysis. However, the obtained liquid product quality and composition is improved.     

SBR法处理柠檬酸废水pH变化规律研究

探索了用SBR法处理柠檬酸废水过程中pH的变化规律。研究了柠檬酸废水处理过程中pH变化与COD处理效率的关系，研究目的在于利用易于检测的水质参数为实现SBR处理过程的自动监测和调控作基础试验研究。     

PX氧化鼓泡塔反应器内的TA浓度分布

利用新建的D476鼓泡塔冷模实验装置和沉降—扩散模型对工业鼓泡塔PX氧化反应器内的TA浓度分布进行了实验和数学模拟研究。结果表明,由于PX氧化气速较大,塔内TA浓度接近均匀分布。     

喷射式气,液反应器在空气—水系统中的传质特性

在对喷射式气、液反应器中复杂的流动行为进行简化和假定的基础上,导得了传质模型,并以空气-水系统进行实验研究。用光电毛细管法测定喷射管内气泡平均直径 d_(32)和比表面积 a,用氮气解吸水中溶解氧的方法获得体积传质系数 k_La,以确定传质模型中的有关参数。实验获得如下结果:α=9.18×10~2β~(0.74)e~(0.372),k_Lα=0.7206β~(0.88)e~(0.492)。其结果与理论分析较接近,可作为喷射式气、液反应器设计参数。     

混凝浑液面沉速与混凝剂投加量的关系研究

探讨了黄河高浊度水混凝沉淀浑液面沉速与自然沉速之间的相关性,经过对实验数据进行线性回归提出了混凝过程中浑液面沉速与自然沉速、含沙量、PAM投加量之间的经验公式。运用该经验公式得出的浑液面沉速计算值与实测相对误差在0.43%～12.27%之间。