层状淤沙对混凝土重力坝地震响应的影响分析

本文研究了不同厚度淤沙对混凝土重力坝地震响应的影响以及一定厚度层状淤沙的不同分布形式对混凝土重力坝的地震响应的影响。基于饱和多孔液固两相介质的压力波动方程,设层状淤沙各层厚度不同,将层状淤沙分为三种不同分布形式,在每种分布形式每层的物理参数相同和物理参数不同两种情况下,确定了淤沙对混凝土重力坝地震响应的影响大小。通过算例分析表明,相同物理性质不同的分布形式对地震响应的影响不显著,而不同的分布形式对坝体的地震响应影响较大。     

Performance comparison of reduced models for leak detection in water distribution networks

This paper presents a methodology for comparing the performance of model-reduction strategies to be used with a diagnostic methodology for leak detection in water distribution networks. The goal is to find reduction strategies that are suitable for error-domain model falsification, a model based data interpretation methodology. Twelve reduction strategies are derived from five strategy categories. Categories differ according to the manner in which nodes are selected for deletion. A node is selected for deletion according to: (1) the diameter of the pipes; (2) the number of pipes linked to a node; (3) the angle of the pipes in the case of two-pipe nodes; (4) the distribution of the water demand; and, (5) a pair-wise combination of some categories.The methodology is illustrated using part of a real network. Performance is evaluated first by judging the equivalency of the reduced network with the initial network (before the application of any reduction procedure) and secondly, by assessing the compatibility with the diagnostic methodology. The results show that for each reduction strategy the equivalency of networks is verified. Computational time can be reduced to less than 20% of the non-reduced network in the best case. Results of diagnostic performance show that the performance decreases when using reduced networks. The reduction strategy with the best diagnostic performance is that based on the angle of two-pipe nodes, with an angle threshold of 165°. In addition, the sensitivity of the performance of the reduced networks to variation in leak intensity is evaluated. Results show that the reduction strategies where the number of nodes is significantly reduced are the most sensitive.Finally this paper describes a Pareto analysis that is used to select the reduction strategy that is a good compromise between reduction of computational time and performance of the diagnosis. In this context, the extension strategy is the most attractive.     

复方降脂中药的性味归经与药效的BPNN研究

针对复方中药药效与其性味归经之间复杂的、不确定的关系,建立适于复方降脂中药的BP神经网络模型,运用Matlab快速预测复方降脂中药的药效指标。经验证,该方法为一种快速、可靠的方法。     

基于改进的Capon滤波器组谱估计新方法

为了解决Capon滤波器组谱估计方法在α稳定分布噪声下性能出现退化的问题,提出了一种改进的Capon滤波器组谱估计方法,利用分数低阶协方差(FLOC)对传统的Capon滤波器组进行重构.由于分数低阶协方差的作用范围是0＜α≤2整个分数低阶空间,因此在α稳定分布噪声下其谱估计性能比基于二阶统计量方法的谱估计性能更好.计算机仿真结果显示了这种方法的优越性能,并且在高斯噪声环境下,其性能与二阶统计量下的方法类似.     

求解弹头散布均匀度的分布估计算法

未来空域窗射击体制是一种新型的高炮射击体制, 这种射击体制对近程防空反导具有显著的效果. 在对未来空域窗进行设计和评价时, 必须计算未来空域窗内弹头散布的均匀度, 并要求算法具有全局收敛以及解的精度高. 文章描述了未来空域窗弹头散布均匀度的问题, 提出了一种求解弹头散布均匀度的分布估计算法; 然后, 提出了一种变焦算法用来提高算法的搜索效率和解的精度, 并给出了混合算法的流程图. 仿真结果表明, 混合算法具有全局收敛、解的精度高以及搜索效率高的优点, 适合于在实际工程中用来求解弹头散布均匀度.     

基于中间节点效应的无标度网络演化模型研究

原BA模型以网络中已存在的各个节点与新增节点的连接相互独立为前提。然而,在真实系统中,当网络中一个节点与新增节点连接后,该节点对其邻居节点与新增节点的连接会存在影响。针对该现象,提出了基于中间节点效应的无标度网络演化模型。首先描述与定义了中间节点效应,然后给出了中间节点效应模型的生成算法,并从理论上分析了该模型的度分布情况,最后利用仿真验证了理论分析的正确性,并就度分布、群聚系数、平均路径长度等复杂网络参数与原BA模型进行了对比,结果表明此模型能生成无标度网络并且更符合现实网络的演化过程。     

基于访问结构上秘密共享的自治愈群组密钥分发方案

自治愈的群组密钥分发能够在不可靠的网络中建立安全的群组会话密钥.基于用户可自行选取子秘密访问结构上的秘密共享方法,提出了一个自治愈的群组密钥分发方案,该方案能够让群组成员自行选取个人秘密信息,而不需要在群组管理员和每个群组成员之间建立安全信道.安全性分析表明,该方案是一个具有撤销能力的、保证前向保密性和后向保密性的、计算上安全的自治愈群组密钥分发方案.性能分析表明,该方案具有较小的存储开销和通信开铕.     

基于扩充的GIX/M/1/N排队系统的主动队列管理算法性能评价模型

为了评价主动队列管理(AQM Active Queue Management)算法的性能,通过在标准的排队系统GIX/M/1/N中嵌入主动队列管理(AQM)算法的方法,建立了一个扩充的GIX/M/1/N排队系统。利用该扩充的GIX/M/1/N排队系统和Internet业务流量自相似性的特征,提出了一种评价AQM算法在非响应业务流量下的性能的分析方法,并据此评价了TD,RED,GRED和Adaptive RED等4个经典的AQM算法。为了验证该分析方法的合理性,利用NS2进行了一系列的仿真实验。结果表明,该分析方法所得结果与仿真实验所得结果一致,因此该分析方法能用于评价AQM算法的性能。     

Reconstructing design parameters of a rectangular resonator via peak signal-to-noise ratio and global optimization algorithms

This article proposes an approach for reconstructing physical parameters of a sample in a rectangular resonator during microwave radiation, knowing a priori, its electric field distribution. The inverse problem was solved using two global optimization algorithms and the peak signal-to-noise ratio (PSNR) criterion. First, the Self-regulated Fretwidth Harmony Search algorithm (SFHS) identified suitable resonant frequencies for a given configuration. Next, the unified Particle Swarm Optimization (UPSO) optimized said configuration. Together, they became a maximization strategy of the PSNR through a dual optimization process. Results showed the ability of the approach for estimating the height of each sample block and the resonating frequency of the cavity. This process takes longer to finish as a higher PSNR is demanded (mainly due to the aforementioned dual optimization). Even so, it allows for more similar electric field distributions between both, the direct and inverse problems.     

EDA9033A在分布式风机性能测试系统中的应用

针对以单片机为核心的风机性能测试系统存在稳定性差、抗干扰能力差、精度低等问题,开发了以PLC为核心、采用互感式采集模块EDA9033A采集风机电参数的分布式风机性能测试系统,给出了该风机性能测试系统的结构,详细介绍了EDA9033A的硬件及软件设计。实际应用表明,EDA9033A采集的风机电参数结果稳定、快速、准确。