Atomic force microscopy study of biaxially oriented polypropylene films

Atomic force microscopy (AFM) uses a very sharp pointed mechanical probe to collect real-space morphological information of solid surfaces. AFM was used in this study to image the surface morphology of a biaxially oriented polypropylene film. The polymer film is characterized by a nanometer-scale, fiberlike network structure, which reflects the drawing process used during the fabrication of the film. AFM was used to study polymer-surface treatment to improve wettability by exposing the polymer to ozone with or without ultraviolet (UV) irradiation. Surface-morphology changes observed by AFM are the result of the surface oxidation induced by the treatment. Due to the topographic features of the polymer film, the fiberlike structure has been used to check the performance of the AFM tip. An AFM image is a mixture of the surface morphology and the shape of the AFM tip. Therefore, it is important to check the performance of a tip to ensure that the AFM image collected reflects the true surface features of the sample, rather than contamination on the AFM tip.     

Influencing factors on elastic-plastic deformation of multi-layered surfaces under sliding contact

Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.     

铜金粉的颜色及其影响因素

利用分光光度计对国内外铜金粉的颜色进行了测试，研究了铜金粉的成分、微观状态对颜色的影响。结果表明：铜金粉颜色可以用色彩三要素进行描述，其中铜金粉的色相只与合金成分有关，而与铜金粉片的大小、形状及粒度分布无关；明度和纯度与铜金粉片在油墨层中定向排列状态、片的大小、形状及粒度分布有关，而与成分无关；合金成分的微小波动不会引起铜金粉色相的明显改变。     

一种变形表面的三维测量方法

提出一种新的利用标定图像进行三维测量的方法。利用SIFT算法找到初始的对应点,然后根据这些点生成三维空间中的种子点,再以这些种子点为中心,向外区域增长,直到完成整个物体表面测量。在每次增长的过程中,需要计算增长的三维空间平面在两个相机上的投影之间的图像相关系数。图像相关系数较大时认为是正确的增长,否则是错误的增长。实验证明,使用该方法能够得到很好的三维测量结果。     

Pro/engineer在产品曲面造型设计中的实现与评估

以产品曲面设计评估技术要求为依据,从技术应用角度论述pro/engineer软件在产品曲面设计中的构建方法和检测手段。从而证明pro/engineer在产品曲面设计中的应用可缩短产品的设计过程。     

响应面法微波降解EGCG制备EGC研究

目的 为探究微波降解EGCG方法制备EGC的效果,以EGC得率最大化为目标,探究微波降解的最佳工艺参数,并建立反映各参数间关系的二次多元方程模型。方法 本研究采用EGCG溶液为原料,运用微波加热降解EGCG制备EGC,通过梯度设置EGCG浓度、微波时长、微波强度三个工艺参数,进行单因素实验、响应面分析及最佳工艺组合验证实验,优化确定EGCG微波降解制备EGC的最佳工艺参数。结果 综合单因素实验及响应面分析,得到的最佳微波降解参数为：EGCG浓度5mg/ml、微波时长3.5min、微波强度为400W,且利用响应面法建立了EGC得率(Y)与EGCG浓度(A)、微波时长(B)、微波强度(C)的二次多元方程模型：Y=59.52+8.38*A+5.38*B+3.53*C-4.04*AB+6.92*AC-9.19*BC-9.99A2⁺0.0786*B2^-15.36*C2^,模型中,EGC得率最高可达62.08%。对最佳微波降解工艺参数进行验证实验,EGC得率为63.40%,与模型预测值接近。结论 运用微波降解EGCG制备EGC具有操作简单,可行性高的优势,且EGC得率稳定性高。     

Surface Control and Electrical Tuning of MXene Electrode for Flexible Self-Powered Human–Machine Interaction

MXene materials emerge as promising candidates for energy harvesting and storage application. In this study, the effect of the surface chemistry on the work function of MXenes, which determines the performance of MXene-based triboelectric nanogenerator (TENG), is elucidated. First-principles calculations reveal that the surface functional group greatly influences MXene work function:  OH termination reduces the work function with respect to that of bare surface, while  F and  Cl increase it. Then, work functions are experimentally determined by Kelvin probe force microscopy. The MXene prepared by gentle etching at 40 °C for 48 h (GE_40/48) has the largest work function. Furthermore, an electron-cloud potential-well model is established to explain the mechanism of electron emission-dominated charge transfer and assemble a triboelectric device to verify experimentally its conclusions. It is found that GE_40/48 has the best performance with a 281 V open-circuit voltage, 9.7 µA short-current current, and storing 1.019 µC of charge, which is consistent with the model. Last, a patterned TENG is demonstrated for self-powered human–machine interaction application. This finding enhances the understanding of the inherent mechanism between the surface structure and the output performance of MXene-based TENG, which can be applied to other TENG based on 2D materials.