The use of wood pulp and radiation‐modified starch in wastewater treatment

Radiation‐induced graft copolymerization of maize starch/acrylic acid has been performed. Also, natural byproduct wood pulp was used after chemical treatment for the removal of metal ions from the investigated wastewater. The surface and structure morphology of the wood pulp and starch/acrylic acid were investigated by scanning electron microscopy and infrared spectroscopy. The physical parameters, such as swelling, gel percentage, and grafting efficiency (%) of starch/acrylic acid copolymer, were studied. The factors affecting the abilities of the prepared materials for removing heavy metal ions and dyes from aqueous solutions were studied. It was found that the maximum metal uptake is in the following sequence: Fe³⁺ > Cr³⁺ > Pb²⁺ > Cd²⁺. The adsorption capacity of such investigated metal ions increases with the increase of pH values. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

不同筛分设备对化学浆细小纤维质量性能的影响

对漂白针叶木浆进行了纤维筛分分级制取细小纤维试样,对比探讨了DDJ和SWECO圆形振动筛两种细小纤维筛分的特性,并且与标准纤维进行配抄,研究了不同细小纤维添加量对纸张性能的影响.实验结果表明:SWECO细小纤维收益率明显高于DDJ细小纤维;DDJ细小纤维具有较高的表面电荷,而SWECO细小纤维具有较高的粘度、比沉降容积;与DDJ细小纤维相比,SWECO细小纤维更能减少纸张的松厚度和透气度,增强纸张的强度.     

聚碳酸酯基聚氨酯/芳纶纤维复合材料的制备与性能

以聚碳酸酯二元醇为软段,利用预聚体法制备了系列聚碳酸酯基聚氨酯/芳纶浆粕纤维(Aramid pulp)复合材料,研究了芳纶浆粕纤维对聚碳酸酯基聚氨酯弹性体(PUE)力学性能的影响。采用扫描电镜、X射线衍射、差示扫描量热分析、热重分析、红外光谱及电子拉伸机等测试仪器对聚氨酯复合材料的结构与性能进行了表征和分析。结果表明,芳纶浆粕纤维能有效实现对聚氨酯弹性体的增强作用,其中对撕裂强度的增强尤为突出。当芳纶浆粕纤维用量为0.5%时,复合材料的撕裂强度由106 k N/m提高到120 k N/m,表现出最好的力学性能;芳纶浆粕纤维在聚氨酯中分散均匀,提高了复合材料的热稳定性。     

不同预冷温度对甜樱桃果实保鲜效果的影响

目的 探究不同预冷温度对采后甜樱桃果实生理品质的影响,找出最适宜的预冷温度,进而推动甜樱桃产业化发展。方法 本实验分别将采后甜樱桃分别预冷至15、12、9、6、3、0℃后回温至室温,以不进行预冷处理为对照组,比较6种处理方式果实预冷和回温过程中的温度变化,并分别测定回温前后果实的色差、呼吸强度及乙烯释放量、硬度、可溶性固形物(TSS)、风味、感官评价,总酚、类黄酮、花色苷、维生素C(Vc)、可溶性蛋白、丙二醛(MDA)含量以及超氧阴离子产生速率(O₂^-)。结果不同预冷温度均可较好地保持果实外观及风味,能够降低甜樱桃果实呼吸强度与乙烯释放量,抑制果实TSS、MDA含量和O₂^-产生速率的上升,延缓甜樱桃果实硬度的下降,从而保持甜樱桃果实的外观品质,且有利于维持甜樱桃果实中的Vc、可溶性蛋白和花色苷含量,以0℃预冷效果最佳,感官评分最高。结论 预冷能够有效维持甜樱桃果实采后的品质,达到增加甜樱桃果实经济价值的作用。     

一种纸浆模塑蜂窝板材缓冲性能的研究

目的 为了解决因技术水平制约,纸蜂窝材料芯纸构型单一、单层厚度受限等瓶颈问题,开发一种通用型缓冲结构板材。方法 以纸浆模塑为原材料,以六棱柱结构为例,设计并加工出一种通过正反插方式组合而成的蜂窝板材,并采用有限元方法进行仿真,得到关键结构参数和相关最优参数组合。结果 正反插结构的纸浆模塑板材具有较好的耦合效应,承载能力相较于单层板材大幅提高;结合极限载荷、比吸能等评价指标对板材性能进行定量分析,初始压缩载荷最大可达到73.7kN,满足托盘等重型包装器具的承载需求。通过极差和方差分析可知,各结构参数对板材承载性能和缓冲性能的影响程度,研究表明单元壁厚、中截面边长对该板材承载性能和缓冲性能影响显著。结论 正反插结构解决了现有纸蜂窝材料高度、厚度受限,构型单一等瓶颈问题,提高了纸浆模塑蜂窝板材的承载性能和缓冲性能,可以满足重载要求。与之相关的其他正多边形锥形薄壁管单元亦可以使用同样的正反插设计理念和研究方法。     

根际环境因子对马铃薯块茎生长发育影响的研究进展

根际环境因子对马铃薯块茎生长发育具有重要影响。马铃薯根际环境因子包括光照、温度、水分、空气、营养以及重力等,从生态学的角度综述了根际环境因子对马铃薯块茎生长发育的影响,并对存在的问题及其研究进展进行了讨论。     

Membrane processes for water recovery and wastewater treatment in the food industry

Despite the efforts to reduce its water consumption,the food industry still requires large amounts of water.Membrane processes have established themselves in the food industry at the beginning of the w...     

Flotation performances of polymorphic pyrrhotite

The floatability of different crystalline structures of pyrrhotite (monoclinic and hexagonal) was studied. It is shown that the floatability of monoclinic and hexagonal has obvious difference, and that the flotation recovery of monoclinic pyrrhotite is larger than that of hexagonal pyrrhotite using different collectors. When butyl dithiophosphate is used as the collector, the recovery is larger than that by sodium butyl xanthate and sodium diethyl dithiocarbamate. At the pH values ranging from 6 to 9, monoclinic pyrrhotite can be floated well, and the flotation recovery is higher than 90%. Monoclinic and hexagonal pyrrhotites are more easily activated by Cu²⁺ in acidic conditions than in alkaline conditions. But Cu²⁺ cannot activate hexagonal pyrrhotite using sodium diethyldithiocarbamate as the collector. By the measurement of contact angle, it is indicated that monoclinic and hexagonal pyrrhotites float well and are easily activated by Cu²⁺ when dithiophosphate is used as the collector. Using sodium diethyl dithiocarbamate as a collector, the relationship between potential and pH range for pyrrhotite flotation is established. At pH 5, the optimal potential range for flotation of monoclinic pyrrhotite is about 125–580 mV (vs SHE), with the maximum flotation occurring at about 350 mV (vs SHE); the optimal potential range for flotation of hexagonal pyrrhotite is 200–580 mV (vs SHE), with the maximum flotation occurring at about 300 mV (vs SHE).     

离心式纸浆泵内部流动的数值模拟

为研究小流量工况下离心式纸浆泵内部流动特性,采用Mixture多相流模型对某一离心式纸浆泵内部流动进行三维不可压两相湍流流动计算,并与清水工况的计算结果进行了比较。对比分析了不同流量工况及介质对泵内流体速度、压力和体积浓度分布的影响,并预测了水力性能。结果显示:纸浆泵叶轮流道内速度变化不均,存在大面积回流;相同介质时,流量越小叶轮流道内部流动越不稳定;相同工况下,清水介质下的流动较两相流时更为稳定;两相流时泵的扬程及效率整体都低于清水介质;纸浆分布局部不均,叶片表面进口处叶根和叶顶部位浓度较大,易造成局部磨损,降低叶轮寿命。