A Thermo-Mechanical Study of Some Epoxy Adhesives Subjected to Combined Dynamic and Static Stresses

The object of the present study was to investigate the effect of superimposed dynamic and static stresses on mechanical and thermal properties of some epoxy adhesives. It was found that combinations of shear creep and torsional oscillations, applied simultaneously to adhesive joints at temperatures within the glassy range of the adhesive, led to strengthening of the joints in shear and to an increase in the glass transition temperature of the adhesive. Similar loading stresses applied at temperatures close to the T_g of the adhesive, led to opposite effects on the above mentioned properties of the joints. The width of the glassy-rubbery transition of the adhesives increased, in the whole range of temperatures used in this study and for all epoxy compositions, as a result of subjecting the joints to superimposed dynamic and static stresses. The broadening of the glass transition was interpreted as a result of the stiffening of polymer network during the combined stressing experiments. A linear relationship was found between the area of endothermal peaks in the first DSC scan of specimens subjected prior to test to superimposed dynamic and static stresses at temperatures below T_g, and the shear strength of the joints. In agreement with this observation and with literature data, a linear relationship was revealed also between the glass transition temperature of the resins (measured in the first DSC scan) and the shear strength of the joints. Based on experimental observations and on some literature information, it was suggested that the strengthening of the joint, as well as the changes in thermal properties of the adhesives, are mainly due to physical processes, such as short-range orientation of network chains and an increase in intermolecular interaction between highly polar sites of the network. The possibility that superimposed stressing led to changes in chemical crosslinking was discussed but it seems that no such reactions occurred.     

Theoretical assessment of the catalytic (Pt/TiO2) oxidation of formaldehyde at ambient temperature

A recent article [C. Zhang, H. He, K. Tanaka, Catal. Commun. 6 (2005) 211] investigates the use of a Pt/TiO₂ catalyst for the oxidation of formaldehyde. The findings demonstrate nearly complete oxidation at ambient temperature (25 °C) for values of the surface velocity in the range 5–10 × 10⁴ h⁻¹ and a 45% destruction when using a surface velocity of 20 × 10⁴ h⁻¹.In the present communication, this oxidation was assessed by theoretical considerations of the reaction kinetics. The destruction efficiency was predicted using a first-order reaction rate expression, combined with different theoretical or semi-empirical equations for the intrinsic reaction rate constant. Predicted and experimental data are in fair agreement, thus validating the theoretical approach and confirming the experimental results.     

Reprint of “Suppressing propylene carbonate decomposition by coating graphite electrode foil with silver”

A method has been developed to suppress the decomposition of propylene carbonate (PC) by coating graphite electrode foil with a layer of silver. Results from electrochemical impedance measurements show that the Ag-coated graphite electrode presents lower charge transfer resistance and faster diffusion of lithium ions in comparison with the virginal one. Cyclic voltammograms and discharge-charge measurements suggest that the decomposition of propylene carbonate and co-intercalation of solvated lithium ions are prevented, and lithium ions can reversibly intercalate into and deintercalate from the Ag-coated graphite electrode. These results indicate that Ag-coating is a good way to improve the electrochemical performance of graphitic carbon in PC-based electrolyte solutions.     

丁二烯适宜贮存温度的研究

研究了贮存温度、时间、气相氧含量和铁锈含量对丁二烯中过氧化物生成量的影响,考察了丁二烯适宜的贮存温度.结果表明:丁二烯中过氧化物含量随着铁锈含量增加而同倍增加;当气相氧含量增加1倍,丁二烯中过氧化物含量提高21%;在对叔丁基邻苯二酚(TBC)为104 mg/kg、贮存时间为7 d条件下,当贮存温度大于21℃时,丁二烯中过氧化物量增加显著;丁二烯较适宜的贮存温度为18℃.工业装置生产运行表明:在18℃下贮存丁二烯是安全、稳定和节能的.将丁二烯贮存温度从13℃调整到18℃,可使其装置运行费用下降43%.     

Glass transition and mechanical properties of PLLA and PDLLA‐PGA copolymer blends

The change of the glass transition temperatures (T_g) in the blend of poly(L ‐lactic acid) (PLLA) and the copolymers of poly(D,L ‐lactic acid) and poly(glycolic acid) (PDLLA‐PGA) with different D,L ‐lactic acid and glycolic acid composition ratio (50 : 50, 65 : 35, and 75 : 25) was studied by DSC. Dynamic mechanical measurement and tensile testing were performed at various temperatures around T_g of the blend. In the blend of PLLA and PDLLA‐PGA50 (composition ratio of PDLLA and PGA 50 : 50), T_g decreased from that of PLLA (about 58°C) to that of PDLLA‐PGA50 (about 30°C). A single step decrease was observed in the DSC curve around T_g between the weight fraction of PLLA (W(PLLA)) 1.0 and 0.7 (about 52°C) but two‐step changes in the curve are observed between W(PLLA) = 0.6 and 0.3. The T_g change between that of PLLA and that of PDLLA‐PGA and the appearance of two T_gs suggest the existence of PLLA rich amorphous region and PDLLA‐PGA copolymer rich amorphous region in the blend. A single step decrease of E′ occurs at around T_g of the pure PLLA but the two‐step decrease was observed at W(PLLA) = 0.6 and 0.4, supporting the existence of the PLLA rich region and PDLLA‐PGA rich region. Tensile testing for various blends at elevated temperature showed that the extension without yielding occurred above T_g of the blend. Partial miscibility is suggested for PLLA and PDLLA‐PGA copolymer blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2164–2173, 2004     

Direct conversion of methane to higher hydrocarbons via an oxygen free,low-temperature route

The direct conversion of methane to higher hydrocarbons over a silica-supported Ru catalyst has been investigated via an oxygen free, two-step route. The reaction consists of decomposition of methane over a 3% silica-supp orted Ru catalyst at temperatures between 400 and 800 K to produce surface carbonaceous species followed by rehydrogenation of these species to higher hydrocarbons at of 368 K. It was found that the Ru/SiO₂ catalyst exhibits a trend similar to that for single-crystal Ru catalysts. However, the temperature at which a maximum in ethane selectivity occurs shifts toward a higher temperature. It was also found that the ethane yield can be optimized by changing the surface carbon coverage. Under optimum conditions a net ethane yield of about 13–15% has been realized. For this two-step reaction sequence, only a few reaction cycles could be operated without intermediate high temperature rehydrogenation and without significant loss in ethane yield. This is attributed to large amounts of inactive carbon that could not be hydrogenated at 368 K. Higher methane partial pressures were found to be desirable for this reaction. The activity of the catalyst could also be maintained at total pressures up to 10 atm.     

The Effect of Temperature on the Strength of Adhesively-Bonded Composite-Aluminium Joints

Different materials have different coefficients of thermal expansion, which is a measure of the change in length for a given change in temperature. When different materials are combined structurally, as in a bonded joint, a temperature change leads to stresses being set up. These stresses are present even in an unloaded joint which has been cured at say 150°C and cooled to room temperature. Further stresses result from operations at even lower temperatures.

In addition to temperature-induced stresses, account also has to be taken of changes in adhesive properties. Low temperatures cause the adhesive to become more brittle (reduced strain to failure), while high temperatures cause the adhesive to become more ductile, but make it less strong and more liable to creep.

Theoretical predictions are made of the strength of a series of aluminium/CFRP joints using three different adhesives at 20°C and 55°C. Various failure criteria are used to show good correlation with experimental results.     

重庆市发展长江水源热泵的水源概况分析

为了解重庆段长江水作为热泵冷热源的概况,对重庆段长江水温的横断面变化和时间变化进行了实测分析,并对江水的水质和水位变化进行了分析,得到长江水温在整个横断面基本恒定,而江水的夏季月平均温度在22~25℃,冬季月平均温度在11~16℃,水温日变化幅度不超过0.5℃。是一种具有良好品质的稳定的冷热源。而长江水作为水源热泵的冷热源,主要解决的水质问题是泥沙和悬浮物,在三峡库区形成后水位变化可达到30 m,因此取水方式可考虑采用浮船取水方式。     

Experimental study on temperature stress calculation and temperature control optimization of concrete based on early age parameters

Temperature control curve is the key to achieving temperature control and crack prevention of high concrete dam during construction,and its rationality depends on the accurate measurement of temperature stress.With the simulation testing machine for the temperature stress,in the present study,we carried out the deformation process tests of concrete under three temperature curves：convex,straight and concave.Besides,we not only measured the early-age elastic modulus,creep parameters and stress process,but also proposed the preferred type.The results show that at early age,higher temperature always leads to greater elastic modulus and smaller creep.However,the traditional indoor experiments have underestimated the elastic modulus and creep development at early age,which makes the calculated value of temperature stress too small,thus increasing the cracking risk.In this study,the stress values of the three curves calculated based on the strain and early-age parameters are in good agreement with the temperature stress measured by the temperature stress testing machine,which verifies the method accuracy.When the temperature changes along the concave curve,the law of stress development is in consistent with that of strength.Under this condition,the stress fluctuation is small and the crack prevention safety of the concave type is higher,so the concave type is better.The test results provide a reliable basis and support for temperature control curve design and optimization of concrete dams.     

基于物联网实验室环境远程监测系统的研究

实验室环境对电子仪器及设备的使用安全和寿命以及实验室消防安全有着非常重大的影响,传统实验室环境监控需要安排人员进行24 h值班和巡检,人力投入和安装布线成本非常高;针对上述问题,采用高性能低功耗离子式烟雾传感器NIS-07和温湿度复合传感器DTH11进行环境数据的采集,采用无线网络模块完成数据的传输,并通过微处理器将采集的数据上传服务器,同时采用基于BP神经网络PID控制算法实现在线动态温湿度调控;服务器端使用Tomcat web服务器,采用MySQL数据库进行数据存储,并通过Java编程语言实现传感器数据的存储、分析、处理以及客户端数据的更新;客户端通过Web网页或APP对实验室环境进行实时监控,从而实现精确和高效的实验室环境远程集中管理.