攀钢高炉焖砂口试验

分析了高炉冶练钒钛磁铁矿炉前砂口损坏的原因。对新型砂口泥进研制，同时改进了套砂口工艺，满足了攀钢高炉焖砂口的需要。攀钢高炉采用闷砂口工艺后，从根本上解决了铁水带渣问题，提高了铁水的洁净度。     

加氢裂化反应器新型冷氢箱的研究与工程设计

报道了加氢加化反应器新型旋流式冷氢箱的研究设计及实用效果，催化剂床层径向温差不大于5℃。     

液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响     

新型非蒸散消气剂的激活温度和吸气性能的实验研究

对主要成分为Zr和Co的新型非蒸散消气剂进行了活化温度及吸气性能的实验研究。实验表明其活化温度为200—250℃，对N2，H2等活性气体有很好的抽速，对惰性气体He等无抽速。     

An Electronic Approach to Materials Design

A molecular orbital approach to materials design has recently made great progress. This approach is based on the electronic structure calculations by the DV-Xα cluster method. In this paper recent progress in this approachis reviewed. In particular     

High temperature transport kinetics in heteroepitaxial LaFeO3 thin films

Heteroepitaxial LaFeO₃(1 1 0) thin films with a thickness of 150 nm were grown on LaAlO₃(0 0 1) by reactive sputtering in an inverted cylindrical magnetron geometry. Equilibrium conductivity was measured as a function of partial pressure of oxygen at T=1000 °C, and logσ plotted vs. logP(O₂) showed a minimum in conductivity for P(O₂)=10⁻¹¹ atm and a linear response between 10⁻¹⁰ and 1 atm. This linear response makes thin films of LaFeO₃ a promising material for oxygen sensor applications. We have also measured the time response of the film conductivity upon an abrupt change in the partial pressure of ambient oxygen from 10⁻² to 10⁻³ atm, which was determined at 60 s for T=700 °C and <3.5 s at T=1000 °C.     

α-Fe_2O_3(SO_4~(2-),Sn)气敏电阻的温度响应特性

在气敏温度区域内研究了α-Fe_2O_3(SO_4~(2-),Sn)材料的电阻-温度特性,认为表面结构的变化导致温度特性出现峰值并呈现气敏性。可利用空气中电阻温度特性提供的信息改性或发现新的气敏材料。     

波形刃铣刀片铣削温度试验分析

进行了铣削温度试验 ,采用改进的人工热电偶法 ,利用动态数据采集系统 ,对波形刃铣刀片的铣削温度进行了采集。利用C语言和MATLAB软件对试验数据进行了分析 ,拟合出温度—时间 (T t)曲线 ,初步得到了受热密度函数 ,为温度场的可视化打下有力的基础     

Tannins/melamine–urea–formaldehyde (MUF) resins substitution of chrome in leather and its characterization by thermomechanical analysis

A new sulfonated melamine–urea–formaldehyde (MUF) resin of relatively low melamine content, prepared according to a sequential formulation, has been shown to be highly effective when coupled with different natural vegetable tannins to produce leather with the same good characteristics of leather prepared with chrome salts. In particular, the antishrinkage effectiveness of the leather prepared according to the new approach is comparable to that obtained with chrome tanned leathers. The comparison of the traditional leather shrinkage temperatures test method with a new thermomechanical analysis (TMA) test method in tension yields thermograms presenting three major modulus of elasticity (MOE) peaks. These are closely connected to molecular level phenomena determining the shrinkage temperature of leather. The three determining parameters appear to be as follows: (1) The average value of the temperatures at which the three MOE peaks occur: the higher the value of this average, the lower is the shrinkage of leather. (2) The average of maximum MOE values of the TMA peaks: the higher this average is, the better is the leather in regard to antishrinkage effectiveness. This means the leather maximum MOE at each peak is a measure of the resistance to the contraction force induced by heat. (3) The relative intensity of the first TMA peak in relation to the second: the higher the value of the MOE for the first TMA peak is in relation to the second peak, the lower the leather shrinkage appears to be. However, it has not been possible to better define or quantify this latter effect. This new TMA test method in tension has also yielded a mathematical relationship correlating the thermogram peak temperatures and MOE averages with the traditional shrinkage temperature to a high degree of confidence. A previous TMA test method, in compression, has proven to yield more problematic and finally not very reliable results when one needs to apply it to a wide variety of different cases. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1889–1903, 2003