Decay rate of critical fluctuations in steam and in dilute steam-NaCl mixtures

The decay rate of critical fluctuations in steam and in a steam-NaCl mixture has been investigated experimentally with the aid of photon correlation spectroscopy. For pure steam, the measurements have been performed along seven isochores [(¦– _c¦)/_c<0.09] as a function of the temperatureT for (T–T_t)<1 K. The results have been compared with the values predicted by the renormalization-group theory written as a modification of the classical mode coupling theory. The agreement between experiment and theory is satisfactory along the critical isochore, but larger deviations are noted for _c when approching the transition temperatureT _t. The decay rate of a 0.1% (molar) dilute mixture of NaCl in H₂O has been measured along some near-critical isochores as a function of temperature. Its behavior, which is very different from that observed for pure steam, is dicussed.Paper presented at the Tenth Symposium on Thermophysical Properties, June 20–23, 1988, Gaithersburg, Maryland, U.S.A.     

On the determination of the thermal diffusion factor from column measurements

A new method for experimental determination of the thermal diffusion factor _T for binary gas mixtures with a thermal diffusion column (TDC) is developed, based on A. M. Rozen's equation of TDC. The experimental results for _T are obtained in a reduced form in this approximation. An experimental reference point, determined in the same TDC with a standard gas mixture, is used for the transformation of the results for _T in absolute units. The proposed method is applicable for arbitrary gas mixtures, irrespective of the mass difference of the components.     

Viscosities of nonelectrolyte liquid mixtures. III. Selected binary and quaternary mixtures

This paper is the final in a series of three viscosity and density studies of pure n-alkanes and selected binary and quaternary mixtures. A standard U-tube viscometer was used for viscosity measurements, and a Pyrex flask-type pycnometer was used for density determinations. Results are given here for pure alkane and selected binary mixtures of n-tetradecane + n-octane, for selected quaternary mixtures of n-hexadecane + n-dodecane + n-decane + n-hexane, and for pure and selected quaternary mixtures of n-hexadecane + n-dodecane + n-nonane + n-heptane at 303.16 and 308.16 K. The principle of congruence was tested, as was the Grunberg and Nissan equation, as they have been shown to be useful as prediction techniques for other n-alkane binary mixtures. Comparisons were made between the two groups of quaternary alkane mixtures and the binary n-tetradecane + n-octane mixtures of the same pseudo composition to understand better the dependence of mixture viscosities on the composition parameter.     

Viscosity of binary mixtures. IV. Triethylamine with alkanes and monoalkylamines at 303.15 and 313.15 K

Viscosities and densities of seven binary mixtures of n-hexane, n-octane, isooctane, n-propylamine, n-butylamine, n-hexylamine, and n-octylamine with triethylamine have been measured at 303.15 and 313.15 K. Deviations of viscosities from a linear dependence on the mole fraction and values of excess Gibbs energy of activation G ^*E of viscous flow are attributable to the H-bonding and to the size of the alkylamine and alkane molecules.     

Improved Controlled Release and Brain Penetration of the Small Molecule S14 Using PLGA Nanoparticles

Phosphodiesterase 7 (PDE7) is an enzyme responsible for the degradation of cyclic adenosine monophosphate (cAMP), an important cellular messenger. PDE7’s role in neurotransmission, expression profile in the brain and the druggability of other phosphodiesterases have motivated the search for potent inhibitors to treat neurodegenerative and inflammatory diseases. Different heterocyclic compounds have been described over the years; among them, phenyl-2-thioxo-(1H)-quinazolin-4-one, called S14, has shown very promising results in different in vitro and in vivo studies. Recently, polymeric nanoparticles have been used as new formulations to target specific organs and produce controlled release of certain drugs. In this work, we describe poly(lactic-co-glycolic acid) (PLGA)-based polymeric nanoparticles loaded with S14. Their preparation, optimization, characterization and in vivo drug release profile are here presented as an effort to improve pharmacokinetic properties of this interesting PDE7 inhibitor.     

纳米Cr颗粒对Ni-Mo复合镀层性能的影响

为了研究纳米Cr颗粒对Ni-Mo复合镀层性能的影响,采用脉冲电沉积方法制备具有不同Cr含量的Ni-Mo复合镀层.利用扫描电子显微镜和X射线衍射仪分别观察和分析复合镀层的组织形貌及结构.采用电化学测试和X射线光电子能谱研究复合镀层的析氢性能和耐蚀性能.结果表明:随着镀液中纳米Cr颗粒含量的增加,镀层晶粒得到细化,析氢过电位增大,复合镀层析氢性能得到提高;当镀液中纳米Cr颗粒含量为20 g/L时,复合镀层表面钝化膜中MoO₃含量较高,且可与Cr产生协同效应,因而复合镀层具有较好的耐蚀性能;但随着镀液中纳米Cr颗粒含量的进一步增加,复合镀层中沉积的Cr元素含量降低,复合镀层的析氢性能和耐蚀性能均降低.因此,当镀液中纳米Cr颗粒含量为20 g/L时,复合镀层具有较好的析氢性能和耐蚀性能.     

燃烧合成三元碳化合物Ti2AlC1-x

采用Ti，Al和C元素粉末为反应物原料，通过燃烧合成法首次成功地制备出了单相三元碳化合物Ti2AlC1-x。实验结果表明：若以“理想”晶体结构化学式Ti2AlC化学计量比为起始反应原料配比，燃烧产物主晶相为Ti2AlC2；以缺碳的非化学计量比(Ti2AlC1-x)为反应原料配比，即Ti：Al：C=3：1．5：1=2：1：0．7(摩尔比)，得到单相的燃烧产物Ti2AlC1-x。从热力学原理的角度探讨了不同原料摩尔配比对燃烧产物相组成的影响机理。     

锐钛型介孔纳米二氧化钛粉体的制备与表征

采用沉淀法,以水溶液为反应体系,无机物（硫酸氧钛和氢氧化钠）为主要原料,加入少量模板剂,制备出锐钛型介孔纳米二氧化钛粉体。通过正交实验分析优选出最佳工艺。采用比表面仪、原子力显微镜（AFM）、高分辨场发射透射电镜等仪器对产品的结构进行了表征,得到了具有较高热稳定性,比表面积为121 m2·g-1,晶粒尺寸为12 nm,介孔平均孔径为10 nm,粉体粒径＜100 nm等特征的锐钛型介孔纳米二氧化钛粉体。     

3D Prussian blue/Pt decorated carbon nanofibers based screen-printed microchips for the ultrasensitive hydroquinone biosensing

Nowadays,water pollution has become more serious,greatly affecting human life and healthy.Electrochemical biosensor,a novel and rapid detection technique,plays an important role in the real-time and trace detection of water pollutants.However,the stability and sensitivity of electrochemical biosensors remain a great challenge for practical detections in real samples to the strong interferences derived from complex components and coagulation effects.In this work,we reported a novel three-dimensional architecture of Prussian blue nanoparticles (PBNPs)/ Pt nanoparticles (PtNPs) composite film,using 3D interweaved carbon nanofibers as a supporting matrix,for the construction of screen-printed microchips-based biosensor.PtNPs with diameters of～2.5 nm was highly dispersed on the carbon nanofibers (CNFs) to build a 3D skeleton nanostructure through a solvothermal reduction.Subsequently,uniform PBNPs were in-situ self-assembled on this skeleton to construct a 3D architecture of PB/Pt-CNF composite film.Due to the synergistic effects derived from this special feature,the as-prepared hydro-quinone (HQ) biosensor chips can synchronously promote both surface area and conductivity to greatly enhance the electrocatalysis from enzymatic reaction.This biosensor has exhibited a high sensitivity of 220.28 μA·L·mmol-1·cm-2 with an ultrawide linear range from 2.5μmol·L-1 to 1.45 mmol·L-1 at a low potential of 0.15 V,as well as the satisfactory reproducibility and usage stability.Besides,its accuracy was also verified in the assays of real water samples.It is highly expected that the 3D PB/Pt-CNF based screen-printed microchips will have wide applications in dynamic monitoring and early warning of ana-lytes in the various practical fields.