Microstructure and thermal behavior of Sn-Zn-Ag solders

The microstructure and thermal behavior of the Sn-Zn-Ag solder were investigated for 8.73–9% Zn and 0–3.0% Ag. The scanning electron microscopy (SEM) analysis shows the Ag-Zn compound when the solder contains 0.1% Ag. X-ray diffraction (XRD) analysis results indicate that Ag₅Zn₈ and AgZn₃ become prominent when the Ag content is 0.3% and above. Meanwhile, the Zn-rich phase is refined, and the Zn orientations gradually diminish upon increase in Ag content. The morphology of the Ag-Zn compound varies from nodular to dendrite structure when the Ag content increases. The growth of the Ag-Zn compounds is accompanied by the diminishing of the eutectic structure of the Sn-9Zn solder. Differential scanning calorimetry (DSC) investigation reveals that the solidus temperature of these solders exists at around 198°C. A single, sharp exothermic peak was found for the solders with Ag content less than 0.5%. Liquidus temperatures were identified with the DSC analysis to vary from 206°C to 215°C when the Ag content ranges from 1.0% to 3.0%     

无捻毛巾产品毛羽问题的分析与实践

对无捻毛巾产品毛羽问题进行了分析,对成因进行了初步探索.通过试验,制定了较为有效的改进措施和工艺.无捻毛巾制品的毛羽问题得到改善,并控制在一个较为合理的范围内.     

Morphology of intermetallic compounds formed between lead-free Sn-Zn based solders and Cu substrates

The morphologies of intermetallic compounds formed between Sn-Zn based solders and Cu substrates were investigated in this study. The investigated solders were Sn-9Zn, Sn-8.55Zn-0.45Al, and Sn-8.55Zn-0.45Al-0.5Ag. The experimental results indicated that the Sn-9Zn solder formed Cu₅Zn₈ and CuZn₅ compounds on the Cu substrate, while the Al-containing solders formed the Al_4.2Cu_3.2Zn_0.7 compound. The addition of Ag to the Sn-8.55Zn-0.45Al solder resulted in the formation of the AgZn₃ compound at the interface between the Al_4.2Cu_3.2Zn_0.7 compound and the solder. Furthermore, it was found that the cooling rate of the specimen after soldering had an effect on the quantity of AgZn₃ compound formed at the interface. The AgZn₃ compound formed with an air-cooling condition exhibited a rougher surface and larger size than with a water-quenched condition. It was believed that the formation of the AgZn₃ compound at the interface occurs through heterogenous nucleation during solidification.     

1等标准光滑圆柱环规检测装置

本装置是在具有高精度导轨的SIP三坐标测量机上架设激光干涉仪作为测量标准器，利用电感测微仪作为瞄准器，使测量可以直接溯源到激光波长，实现了1等标准光滑圆柱环规的高精度测量。装置对φ50mm标准环规直径测量的不确定度达到70．15μm。通过与瑞士国家计量局和国家计量院的比对测量证实，无论在国内还是国际环规测量方面，该装置已达到先进水平。     

Surface modification of starch nanocrystals through ring‐opening polymerization of ε‐caprolactone and investigation of their microstructures

Bionanoparticles of starch obtained by submitting native potato starch granules to acid hydrolysis conditions. The resulted starch nanoparticles were used as core or macro initiator for polymerization of ε‐caprolactone (CL). Starch nanoparticle‐g‐polycaprolactone was synthesized through ring‐opening polymerization (ROP) of CL in the presence of Sn(Oct)₂ as initiator. The detailed microstructure of the resulted copolymer was characterized with NMR spectroscopy. Thermal characteristic of the copolymer was investigated using DSC and TGA. By introducing PCL, the range of melting temperature for starch was increased and degradation of copolymer occurred in a broader region. X‐ray diffraction and TEM micrographs confirmed that there was no alteration of starch crystalline structure and morphology of nanoparticles, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Kinetics study of Ti[O(CH2)4OCHCH2]4 initiated ring‐opening polymerization of ε‐caprolactone by differential scanning calorimetry

Chemical shrinkage was used for the in situ measurement of the progressing chemical stabilization reactions and the influence of ozone during the stabilization of polyacrylonitrile. A method for evaluating the activation energy through the sensitivity temperature is presented. The calculated results show that the activation energies were 161.57 kJ/mol in air and 181.23 kJ/mol in ozone-enriched air. Therefore, the chemical reactions were postponed during stabilization in ozone-enriched air. Ozone seemed to act in three ways: first, ozone promoted the formation of the serious skin–core structure. Second, ozone accelerated the chemical reactions and shortened the stabilization time at lower heating rates. Third, ozone postponed the chemical reactions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

含有复合阻尼结构的压力波制冷机振荡管内流动分析

通过对含有复合阻尼结构的压力波制冷机振荡管内的流场分析，详细讨论了激波在接受管内的行为，数值计算同时表明：含有两道复合阻尼结构加上激波吸收腔完全可以将激波降低到工程上可以接受的程度。     

邯钢西区煤气管网改造及效果分析

介绍了邯钢为减少煤气放散，节约能源，采用环网供应混合煤气的有效方法。提高了供气可靠性，取得了很好的经济效益。     

Study on Preparation and Application of Ti／Si Complex Zeolite

A Ti/Si complex zeolite has been prepared. X-ray diffraction and infrared spectrometry study has shown that two structures, namely the ZSM-5 and MCM-41, exist in the sample. BET tests have revealed that the complex zeolite contains regular mesopores of 2.6 nm. Ultraviolet spectrometry analysis has shown that the Ti species exist in the zeolite skeleton in the form of tetra-coordinate valence. The Ti/Si complex zeolite (TS-1/Ti-MCM-41) has apparently improved catalytic activity with respect to the macromolecular organic compound oxidation as compared to individual components of either Ti or Si containing zeolites (TS-1 and Ti-MCM-41).     

大型机械搅拌槽槽底结构设计

根据大型机械搅拌平底槽槽底结构的设计实践 ,分析了其设计要点 ,介绍了适用于大型机械搅拌装置的槽底结构。