橡胶混炼质量的影响因素及改进方法

从混炼工艺和混炼设备两个方面分析橡胶混炼质量的影响因素及改进方法。改善混炼工艺如采用高速或变速混炼工艺、低温一次法混炼工艺等可以提高混炼胶性能的稳定性和生产效率;调整湿法混炼喷射压力,在白炭黑胶料混炼过程中加入干冰,外加适当功率及时间的超声波作用辅助混炼可以提高配合剂的分散性和混炼胶的综合性能;对混炼设备内表面进行良好的涂层点焊,可以延长混炼设备的使用寿命,提高生产效率。这些方法对于提高混炼胶性能及生产效率,降低能耗和污染等具有突出的作用。     

Stereocomplex Crystallization Induced Significant Improvement in Transparency and Stiffness–Toughness Performance of Core-Shell Rubber Nanoparticles Toughened Poly(l-lactide) Blends

Toughening modification of poly(l -lactide) (PLLA) with rubber particles is often realized at the cost of transparency, mechanical strength, and modulus because high rubber loadings are generally required for toughening. In this work, a promising strategy to simultaneously improve the transparency and stiffness–toughness performance of poly(butyl acrylate)-poly(methyl methacrylate) (BAMMA) core-shell rubber nanoparticles toughened PLLA blends by utilizing the stereocomplex (SC) crystallization between PLLA and poly(d -lactide) (PDLA) is devised. The results reveal that the construction of SC crystallites in PLLA matrix via melt-mixing PLLA/BAMMA blends with PDLA can prevent BAMMA nanoparticles from aggregation and promote them to form network-like structure at lower contents. As a result, not only higher toughening efficiency with less rubber contents but also superior transparency is achieved in the PLLA/PDLA/BAMMA blends as compared with the PLLA/BAMMA ones where large aggregated BAMMA clusters are formed. Moreover, the outstanding reinforcement of SC crystallites network for PLLA can impart an enhanced tensile strength and modulus to PLLA/PDLA/BAMMA blends, thus improving the stiffness–toughness performance of PLLA/PDLA/BAMMA blends to a higher degree. This work demonstrates that SC crystallization is a promising solution to solve the contradiction between transparency and mechanical properties and then obtain superior comprehensive performances in rubber toughened PLLA blends.     

强化三元混合熔盐的传热性能的实验研究

太阳能发电技术中传热性能的优劣影响着太阳能的利用程度。选用石墨作为强化相变材料传热性能的添加剂与三元混合熔盐（K₂CO₃-NaCl-Li₂CO₃）按照石墨质量分数为5%、10%、15%进行混合制备,使用TC3000通用型导热系数测试仪测定16种试样的导热系数。并测试经历300次循环储能、释能实验试样的导热系数循环稳定性。实验结果表明：添加石墨后的混合相变材料导热系数最高可提升至原混合材料的3.38倍,当石墨的质量分数为15%时,混合相变材料的导热系数最大。在经历300次储能、释能实验后,材料的导热系数基本保持稳定,变化浮动不高于15%。石墨作为强化材料的添加剂,可有效提升强化材料的传热性能,具有实际工程的应用价值。     

型材弯曲模设计

分析了型材在弯曲后其口型失稳起皱的原因,介绍了在型材槽型中填充胶条后在模具的夹持中弯曲成形的工艺,从根本上解决了型材的失稳和起皱,保证了型材的口型尺寸。     

Aging and mechanical properties of NR/BR blends

The mechanical properties and post-thermal aging properties of natural rubber (NR) and polybutadiene rubber (BR) blends at different blending ratios are investigated herein. The experimental results show that both tensile and tear strengths of NR/BR blends increase with increasing NR content. BR has a higher compression stiffness than NR. The deformation of BR is less than that of NR under the same load conditions. With regard to aging properties, both tensile stress and strain of NR/BR blends decrease after prolonged aging. In addition, the stress loss of BR is lower than that of NR, meaning that the aging resistance property of BR is superior to that of NR. Furthermore, accumulated thermal history has shifted the glass transition temperature (T _g) of NR/BR blends toward lower temperatures while the loss tangent (tan δ) value increases with prolonged thermal aging.     

Bi-Pb-Tl三元系相图

用室温、高温X射线衍射及淬火的方法,测定了Bi-Pb-Tl三元系25℃的等温截面及该体系中的相结构。     

艺术铸件冷冻冰模制模方法的研究

艺术铸件是艺术创作和铸造技术的完美组合，铸造工艺是艺术思想的重要保证。从古至今，艺术家和铸造工作者进行了不懈的探索。本文通过试验，分析了冷冻铸造方法用于艺术铸造的一些优势，探讨了用硅橡胶模具制作冰模的工艺方法，并将用此工艺成功制作的一些冰模展示出来。     

橡胶密炼机混炼工艺瞬时功率控制法

橡胶密炼机混炼工艺瞬时功率控制法的理论由３部分组成：橡胶混炼过程的机理、密炼机流理论和混炼过程功率曲线与能量控制法不同，瞬时功率控制法实质上是控制混炼过程中胶料的粘度，确保混炼工艺过程保持最佳状态。因而瞬时功能控制法可监控生产过程，为密炼机混炼工艺的智能控制奠定了基础。     

Polynitroalcohols obtained through nitro aldol reaction between nitro oligomers and C1‐C2‐aldehydes

Polynitroalcohols (PNA) were obtained by A_N‐reaction of nitro oligomers from ground waste rubbers (NO‐GWR) with C₁‐C₂‐aldehydes in presence of organic bases triethanolamine, triethylamine and cyclopropylamine. The A_N‐reaction was studied at temperatures from 30 to 50°C, time 4 h, and NO‐GWR : aldehyde = 1 : 0.5/2.0 mass ratios in the solution. PNA were characterized by elemental analyses, such as ¹H NMR spectra, IR spectroscopy—baseline method with internal standard and thermal analyses. The quantitative functional composition of PNA (%NO₂, %C?O, and %OH groups) was proved to be similar to the composition of PNA obtained from model butadiene–styrene nitro oligomer (BSNO). It was concluded that NO‐GWR could replace NO based on elastomers in nitro aldol reaction with formaldehyde and acetaldehyde. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3241–3250, 2006     

CR／MMA乳液接枝共聚物的研制

用乳液接枝共聚法制备ＣＲ／ＭＭＡ共聚物，讨论ＣＲ乳液、引发剂、接枝温度、ＭＭＡ用量对接枝共聚转化率，接枝ＭＭＡ含量、ＭＭＡ接枝效率和粘接性能的影响，用红外光谱对接枝共聚物进行表征，该共聚物具有较好的粘接性能。