格栅式水泥搅拌桩支护在西涌泵站的应用

简介水泥搅拌桩的支护机理,以西涌泵站为例介绍采用格栅式水泥搅拌桩作支护结构的设计及计算方法,指出该技术能较好地解决软湿粘性土地区枢纽深基础开挖问题.     

Characterization of CuInS2 thin films for solar cells prepared by spray pyrolysis

We have made a study of the chemical composition, the electrical, the optical and the structural properties of polycrystalline CuInS₂ thin films prepared by spray pyrolysis to be used for thin film solar cells. These films were deposited starting from aqueous solutions with different chemical compositions ([Cu]/[In] and [S]/[Cu] ratios) and at different substrate temperatures. In all cases, the material is p-type with grains preferentially oriented in the (112) direction of the sphalerite structure. The electro-optical properties show a very strong dependence on the [Cu]/[In] ratio in the solution. Films with copper excess have smaller resistivity and better crystallinity than those which are stoichiometric or have indium excess. The results obtained in this work show the possibility of having CuInS₂ thin films with a wide range of resistivity, a fact that could be important for making solar cells based on this material.     

Heat transfer in YBaCuO thin film/sapphire substrate system

The thermal boundary resistance at the YBaCuO thin film/Al₂O₃ substrate interface was investigated. The transparency for thermal phonons incident on the interface as well as for phonons moving from the substrate was determined. We have measured a transient voltage response of current-biased films to continuously modulated radiation. The observed knee in the modulation frequency dependence of the response reflects the crossover from the diffusion regime to the contact resistance regime of the heat transfer across the interface. The values of transparency were independently deduced both from the phonon escape time and from the time of phonon return to the film which were identified with peculiarities in the frequency dependence. The results are much more consistent with the acoustic mismatch theory than the diffuse mismatch model.We are grateful to A. Elantev for helpful discussion. We acknowledge the financial support of the Russian Scientific Council on the HTS problem (Project No. 90462).     

液晶光阀用ZnSSe薄膜的光电特性研究

用分子束外延法(MBE),在铟锡氧化物(ITO)导电玻璃衬底上生长了ZnSSe薄膜,详细研究了薄膜的光电特性.通过控制反应时的生长参数,制备出了符合紫外液晶光阀设计要求的光导层薄膜.室温下,该薄膜光谱响应截止边的响应度为0.01A/W,紫外/可见光响应对比度大于103.薄膜的暗电阻率随薄膜晶粒增大而减小,在衬底温度为2900C时,所获得的ZnSSe薄膜具有4.3×1011Ω@cm的暗电阻率.频率从40Hz到4000Hz的交流特性测试,也证实该薄膜符合器件紫外成像的工作要求.     

电双稳薄膜阻抗转变机理研究

采用真空蒸发的方法交替沉积Ag和TCNQ分子制备了Ag TCNQ金属 有机络合物薄膜 ,并研究了多种外加电压激发下膜的电阻转变特性。发现在转变过程中存在着一种能量效应 ,即当外电压超过某一阈值后 ,完成转变的能量不变。对此现象的可能解释是薄膜内分子在一定的外部电场能量诱导下发生重排 ,致使电导率发生跃变     

崇礼东坪黄金公司缓倾斜薄矿体采空区综合治理

在采空区调查的基础上,以FLAC工程力学分析软件为手段,应用“诱导崩落和封闭采空区综合治理”理论,进行缓倾斜薄矿体采空区综合治理研究.该项研究与实践为缓薄矿体采空区综合治理提供了可供借鉴的经验,并为矿山创造了可观的经济效益.     

T型薄壁管节点应力集中系数有限元分析

通过有限元的方法,分析了T型薄壁管节点受平面内弯矩作用下的疲劳行为,得到了应力最大值的位置和拟合出用于预测T型薄壁管节点受平面内弯矩作用下的应力集中系数的参数公式。     

有机薄膜电致发光器件的结构

有机薄膜电致发光现象及其广阔的应用前景，激发了人们的研究兴趣。本文介绍了器件结构的研究现状。     

EXL能谱仪薄样品X线的定量分析

研究了Link公司能谱仪中RTS软件（薄膜定量分析软件）可靠性及适用性。实验结果表明：RTS软件定量分析结果误差较小。但对C、N、O等轻元素定量分析，试样厚度小于1500以下时，结果才比较可靠。