Oxidative coupling of methane over CaO-MgO mixed oxide

Mixed oxide catalyst prepared by co-precipitating magnesium oxide and calcium oxide showed an excellent activity for the oxidative coupling of methane. The high performances were presumed to arise from the high basicity of the mixed oxide.     

Influence of silicon on the growth of barrier-type anodic films on titanium

Amorphous anodic titania, stabilised by incorporation of silicon species, is shown to grow to high voltages on sputter-deposited, single-phase Ti-Si alloys during anodizing at a constant current density in ammonium pentaborate electrolyte. The films comprise two main layers, with silicon species confined to the inner layers. An amorphous-to-crystalline transition occurs at ∼60 V on the Ti-6 at.% Si alloy, while the transition is suppressed to voltages above 140 V on alloys with 12 and 26 at.% silicon. The crystalline oxide, nucleated at a depth of ∼40% of the film thickness, is associated with the presence of a precursor of crystalline oxide in the pre-existing air-formed oxide. The modified structure of the air-formed oxide due to increased incorporation of silicon species suppresses the amorphous-to-crystalline transition until the onset of dielectric breakdown. The transport numbers of cations and anions during growth of the anodic oxides are independent of the concentration of silicon species in the inner layer, despite the marked change in the field strength.     

环氧丙烷生产工艺进展

综述了近年来环氧丙烷合成工艺的新进展,包括对现有环氧丙烷生产工艺的革新、直接氧化法、光催化环氧化等方法,并对各种方法的特点和发展前景进行了讨论.     

电石渣在环氧丙烷生产中的循环利用

总结了电石渣生产环氧丙烷工艺中的设计与应用。运行情况表明，该工艺具有明显的经济效益和社会效益。     

Influences of zinc oxide and an organic additive on the electrochemical behavior of pure aluminum in an alkaline solution

The corrosion behavior of pure aluminum in inhibited and uninhibited 4 MKOH was investigated by means of hydrogen collection, polarization curve measurement and electrochemical impedance spectroscopy (EIS). The results showed that the corrosion of pure aluminum was greatly inhibited by the addition of ZnO and dimethyl amine epoxy propane (designated as DE). EIS and EDAX analyses revealed that ZnO produces its effect by depositing on the aluminum surface, which increases the overpotential of hydrogen evolution. It was also found that the addition of DE could greatly improve the deposition of zinc layers.     

侧链为亚乙氧基结构的EVOH梳型聚合物的合成

以乙烯-乙烯醇共聚物(EVOH)为原料，制备了一种主链为疏水的聚乙烯链段，侧链具有亚乙氧基结构的多羟基梳形聚合物，用元素分析法、凝胶渗透色谱法、核磁共振谱法对其进行了结构表征；用热重分析法和示差扫描量热法对其热学性能进行了表征。结果表明，接枝后产物的玻璃化转变温度在-52--40℃之间，熔点在55～600℃之间，由于侧链的引入破坏了EVOH的结晶，因此梳形聚合物的热分解温度比EVOH降低了约20℃。     

酸性镀锡液的新进展

从近几年美国发明专利的角度扼要综述酸性镀锡液的新进展。说明酸性镀锡液由氟硼酸盐型发展为烷基磺酸盐型的改进过程。列出参考文献９篇。     

Lithium/V6O13 cells using silica nanoparticle-based composite electrolyte

The electrochemical behavior of Li/V₆O₁₃ cells is investigated at room temperature (22 °C) both in liquid electrolyte consisting of oligomeric poly(ethyleneglycol)dimethylether+lithium bis(trifluoromethylsulfonylimide) and composite electrolytes formed by blending the liquid electrolyte with silica nanoparticles (fumed silica). The addition of fumed silica yields a gel-like electrolyte that demonstrates the desirable property of suppressing lithium dendrite growth due to the rigidity and immobility of the electrolyte structure. The lithium/electrolyte interfacial resistance for composite gel electrolytes is less than that for the corresponding base-liquid electrolyte, and the charge-discharge cycle performance and electrochemical efficiency for the Li/V₆O₁₃ cell is significantly improved. The effect of fumed silica surface group on the electrochemical performance is discussed; the native hydrophilic silanol surface group appears better than fumed silica that is modified with a hydrophobic octyl surface moiety.     

纳米氧化锌对NR胶料性能的影响

研究纳米氧化锌等量或减量替代间接法氧化锌对NR胶料性能的影响。结果表明 ,当纳米氧化锌等量或减量 3 0 %替代间接法氧化锌应用时 ,胶料的焦烧时间和正硫化时间延长 ,抗硫化返原性能提高 ,硫化胶的邵尔A型硬度、3 0 0 %定伸应力和拉伸强度增大 ;当纳米氧化锌减量 60 %～ 80 %使用时 ,胶料的抗硫化返原性能下降 ,硫化胶的拉断伸长率和撕裂强度增大